Show your new tool arrivals

[nev]

Duro USA Metric Set - Missing 1 wrench that I already had a single of... SCORE
Wera Metric Set - Amazon Warehouse Deal - original box damaged... 33% off
Two Garage Kitties admiring the new wrenches...

What are your thoughts on the Wera bit check?

 

[maintguy]

I got this at a local pawn shop $ 10 out the door

 

[PelicanPines]

What are your thoughts on the Wera bit check?

I have several wera screwdrivers... lasercut and a few other sets. I use them daily and love them.

However this bit set is new for me and I will need to use it more to form an opinion. I'm hoping I love them as much as the full sized sets I have.

 

[cja245]

Had these a little over a month. MAC prybar set. Got the BOGO deal with the extra 42'' bar.

 

[maintguy]

Had these a little over a month. MAC prybar set. Got the BOGO deal with the extra 42'' bar.

those look sweet

 

[wvhillbillie]

Paid $5.50 for each.
12oz hammer, tap driver set, auto stethoscope.


Sent from my SM-T110 using Tapatalk

 

[Tyguy1209]

Mortorq sockets from lisle from pep boys. Needed these to remove a seat on a 15 Chrysler 200

Sent from my SAMSUNG-SM-G891A using Tapatalk

 

[WhiffySpark]

Great another fastener. I just sold my 5 point security torxs after using them once in 6 months. And needed them again lol

 

[nev]

I have several wera screwdrivers... lasercut and a few other sets. I use them daily and love them.

However this bit set is new for me and I will need to use it more to form an opinion. I'm hoping I love them as much as the full sized sets I have.

Yeah i do too, been looking at this and the vde interchangeable bit set

 

[lucky3]

Just picked this up after I sold my matco 4s

 

[toolmutt]

Great another fastener. I just sold my 5 point security torxs after using them once in 6 months. And needed them again lol

Never sell something because you don't "need" it. That's a guarantee to need it tomorrow! Besides, this is GJ. You need everything!

 

[Sam'sAutoParts]

GW security/tamper proof torx from Advance. I used my speed perks so I only had to pay the sales tax on these.

 

[GTA Matt]

Great another fastener. I just sold my 5 point security torxs after using them once in 6 months. And needed them again lol

But wait, there's more! Just picked up these E-torx plus sockets from matco. I'll store them right next to my mortorq, security torx, tamper proof triple square and tamper proof hex...

 

[disston]

Just picked this up after I sold my matco 4s

It's camouflage. How will you ever find your tools?

 

[Screw Loose Dan]

New for me arrivals...

Drill press, vise, and arbor press:

A 4" bench vise (Morgan Chicago):

 

[Rick M]

Just picked this up after I sold my matco 4s

Full of awesome. I should do a wrap on my tool box.

 

[Tyguy1209]

Just some cheap things from cornwell this monday.

Sent from my SAMSUNG-SM-G891A using Tapatalk

 

[PelicanPines]

Williams Wrench Collection grows... I got a few from the Amazon Warehouse Deal thread over the last year or so... recently I picked up a few more at a yard sale as they were setting up. All in perfect shape...

So far I only have one duplicate that may get listed in the classified section along with a few other duplicates manufacturers.

 

[NoahG]

Sent from my iPhone using Tapatalk

 

[upgrading]

^^^^^
Good stuff.

It's camouflage. How will you ever find your tools?

Yeah, but the dear wont be able to find them either.

 

[jgreen-fsi]

Wanted another cheapo multimeter for the house. $3 after points. Also got a Lisle parasitic draw tester and Irwin #1 and #2 phillips power bit.

 

[3TV]

It's camouflage. How will you ever find your tools?

Tell me about it. I've got a camo UTV; never can find that damn thing.

 

[3TV]

This work step just came today on UPS. I've been impressed with the tools I've purchased from Matco, until this one. I'm a little underwhelmed. I'm pretty sure there are walkers for little old ladies that are built more stout than this is.

I've had the chance to use this step platform several times since posting about it. It turns out that it actually works quite well. I like it afterall.

 

[Brownsfan]

GW security/tamper proof torx from Advance. I used my speed perks so I only had to pay the sales tax on these.

I have this set and it has been great. I actually used them a few times on non security torx bolts and and they took it no problem. I had to really crank on a seat belt bolt and these actually fit the fastener better than my regular torx Cornwell t50.

 

[Mastermind]

But wait, there's more! Just picked up these E-torx plus sockets from matco. I'll store them right next to my mortorq, security torx, tamper proof triple square and tamper proof hex...

Great. I need those now. I don't have them. Gotta have! I've used my 5 point torx once. On a center cap. Have yet to actually use the mortorq since I got them for father's day, but have used them in the past. Did finally need a 9mm allen today, escape hybrid front calipers. Now I gotta find one of those, boss had a mac one, none of my sets had it.

 

[3TV]

Just got these Matco SAE hex sockets.

 

[PelicanPines]

I need to get a metric set of those. I have had the sae set for years its a Matco set. Guess I need to watch tekton and sunex Which is the best in your opinion.

To be honest at this point... they are equal in quality. Both are nicely finished and I put a digital caliper on them... both sets measure well.

I also have both sunex sets of the angle wrench's no experience with tekton. They get used occasionally and have held up well, to bad coo is china

Mine wont get that serious of a workout either. Coo aside... I seriously like them.

I have several wera screwdrivers... lasercut and a few other sets. I use them daily and love them.

However this bit set is new for me and I will need to use it more to form an opinion. I'm hoping I love them as much as the full sized sets I have.

Ok... played with the bits some. Holy **** ... these are quality. Prior to these... my loose bits were the throw away brands mostly. I have to say these wera bits are equal to the quality of the full size wera screwdrivers.

 

[Bellaireroad]

finally bought myself a welder to use at work instead of the extremely old one that work provides. ESAB Rebel. MIG, Stick, TIG. comes with all three leads just have to buy the pedal later. $1500 was a good deal 110v or 220v. welds up to 3/8. great for working on mowers and UTVs.

Great deal on that welder

 

[Bellaireroad]

http://www.garagejournal.com/forum/attachment.php?attachmentid=591669&stc=1&d=1477181039

Santa came early this year

Nice box, like the stainless top

 

[3TV]

Just got these to finish off my screwdriver set.

 

[MattVette89]

This arrived last week, snap on 1/4" metric semi deep set:



Some battery tools:



Great deal on eBay, 3/8 roto head:



Picked up Monday on the truck, BOGO:



Arrived Monday night, stole them off eBay (after clean up):



Arrived tonight, 1/4" sae semi deep (like new) to complement the metrics:

 

[48548]

Warranty replacements...

 

[170-3tree]

Had a Buick come in that needs a bunch of brake lines.
So I went and bought a craftsman flaring tool, tubing cutter.
I also picked up a can of freeze off by CRC. Heard good and bad, gonna give it a whack especially for cooling off stuff I torched for alignments so measurements to go out again.

 

[neonlazer]

New to me. My father bought an entire Sears tool department when he got msrried. He found a unused tap/die set in a dark corner.

Sent from my SM-G930V using Tapatalk

 

[not-required]

To match my 3/8" drive version

 

[R_einan]

Snap-on FHKFD80 in yellow finally showed up, and a 3/8 SAE semi-deep set.

 

[Tyguy1209]

Snapon Wednesday.
First updated my scanner.


Two new ratchets, one regular 1/4 in and one super long 3/8. A punch holder, snapon Kershaw knife and a 16oz hammer. Plus a pair of socks a beanie and a coat he said he would have one in my size next week.

Sent from my SAMSUNG-SM-G891A using Tapatalk

 

[jlipsky14]

Posted this in the Milwaukee thread but figured I would add it up in here too.
Picked them up a few weeks ago. Also got a jobsite organizer and contractor bar plus 6 pairs of their locking pliers that haven't been delivered yet.

As you can see I modified the drill case a little bit to hold an extra battery.

 

[johnt2k7]

I picked up a TLLF72 1/4 Ratchet and Swapped a FCF72 3/8 rebuild kit into it.

I used my RAF80 low pro ratchet and sockets all the time to get into tight places and this long handle TLLF With the Head swap ends up being about the same size, if not a touch thinner depending on the socket

and just to compare to the most common ratchets i use daily

 

[48548]

I want to drink the snap on koolaid again, but need to stop as it is addicting.