Show your new tool arrivals

[mjoekingz28]

Local Sears Hardware went out of buisness


Sent from my SM-N930P using Tapatalk

What are those three pieces on the top right corner. They look like they hook up to an air chuck AND a power drill???

 

[lucky3]

Picked up this nice mac 700lume light

 

[duramarks]

What are those three pieces on the top right corner. They look like they hook up to an air chuck AND a power drill???

They are flex shafts for a drill. I got one for me and teo for gifts.

Sent from my SM-N930P using Tapatalk

 

[[memphis]]

When you don't actually manufacture anything with your name on it you're at the mercy of your suppliers. Just purchase the GearWrench models, they are the exact same products at much lower prices.
Your dealer probably means April 2018 as well.

Six weeks so far to warranty a Matco 3,8 ratchet.
Glad I bought Strap-On recently and it was $100 cheaper than Matco to boot!

Dealer support is terrible where I am located. Not only are they just rebadges you can`t even warranty products.

 

[dodge610]

. Went shopping at HD and got a few sale items for the new impact driver that might be under the tree [emoji268] on Christmas [emoji319].


Sent from my iPhone using Tapatalk

 

[ihateminimumwage]

It came in the Big Brown Truck, today

Probably one of my all time favorite tools. Mine live in the right leg pocket of my Carhartts. I use them almost daily.

 

[mjoekingz28]

Thanks duramarks!

...had me wondering

 

[Devin86]

Picked up a used D675 than unfortunately will need to be resold. As it is to big for my little mill. And a OTC axle seal installer as I am getting ready to do ball joints on my powerstroke.

 

[Empty Pockets]

Wednesday before thanksgiving, I made a visit to a pawn shop. These are the results:

1-SK Box, Pretty solid, lots of surface rust, needs painted

14 Sockets:
SK 40618, 3/8 Drive Flex Socket 9/16"
SK 45120, 3/8 Drive 5/8" 12 Point
SK 45118, 3/8 Drive 9/16" 6 Point
Proto 4990, 3/8 Dr Hex Bit 1/4"
Proto 5220, 3/8 Dr 5/8" 12 Point
Proto 5424, 1/2 Dr 3/4" 12 Point
Proto 5428, 1/2 Dr 7/8" 12 Point
Proto 5012, 3/8 Dr 3/8" Deep Socket, 12 point
Proto 5218, 3/8 Dr 9/16" 12 Point
Plumb 5418, 1/2 Dr 9/16" 12 Point
Indestro 1232, 1/2 Dr 1" 12 point
Mac X246, 3/8" Dr 3/4" 6 point
Wizard H2662, 1/2 Dr 5/8" 12 Point
Wizard H2660, 1/2 Dr 9/16" 12 Point

15 Wrenches:
Indestro Ratchet, Hex Drive, Missing Insert
Indestro P-27, DOE 11/16 X 19/32
Barcalo-Buffalo, 1/2" Combo
Billings, 7/16" Combo
Williams Superwrench S-1182, 1/2" Combo (engraved)
Armstrong, 9/16 X 7/16 DOE
Armstrong Armaloy 1153, 9/16 Combo
Cornwell IW-13, 11/32 X 5/16 Ignition Wrench
Cornwell BW1214S, 7/16 X 3/8 DBE
SK Wayne C-14, 7/16 Combo
Bonney 1159, 5/16" Combo Polished 12 Point
Bonney 1160 H, 5/16" Combo 6 Point
Bonney 1162, 1/2" Combo (Raised Pannel)
* Craftsman 5/8" Combo 12 Point
* Craftsman 1/4 X 5/16 DOE

* Both CM Wrenches are older, where the "C" underlines the rest of the logo

Not bad for $20.00

 

[SquareLJ]

Picked up this nice mac 700lume light

I've got the 450lumen version and love that little *******. Been doused with hydraulic oil, engine oil and been given a steam bath and it still works great. Just ordered the 700lumen version from my dealer for help in bigger areas.

 

[SquareLJ]

Flexzilla swivel attachments, SnapOn impact extensions and a set of Snap Connector wrenches from work.

 

[bert1913]

10 ton battery cable crimper and cable cutters

 

[zzzz]

Some new things for the collection. Bonney, Snap-On and Mac. Also a Mercer dial indicator...

 

[wagzilla]

10 ton battery cable crimper and cable cutters

That's really nice

James

 

[Project_shadow]

40$ total today on sale



Sent from my iPhone using Tapatalk

 

[BaMaDuDe87]

10 ton battery cable crimper and cable cutters

Ready for the questions?

What kind of crimper is that? Where'd ya get it? How much? What throat sizes are included?

Sent from my SM-N910V using Tapatalk

 

[paranoid56]

Ready for the questions?

What kind of crimper is that? Where'd ya get it? How much? What throat sizes are included?

Sent from my SM-N910V using Tapatalk

looks like the harbor freight setup.
http://www.harborfreight.com/hydraulic-wire-crimping-tool-66150.html

 

[jobo1004]

looks like the harbor freight setup.
http://www.harborfreight.com/hydraulic-wire-crimping-tool-66150.html

Based on the model number visible in the picture, it's actually this one. Having said that there could be no difference between the two.

https://www.iwiss.com/yqk-70-hexago...hydraulic-tools-of-manual-operated-for-cable/

 

[katiexoxo]

 

[ttpete]

no worky

 

[NUTTSGT]

no worky

It doesn't work due to it being an IMGUR link. Imgur doesn't allow linking to GJ since we have a classified section.

 

[NUTTSGT]

Picked up some "tools" for the trailer.



A Champion winch, BF from FFH for $50. It'll be hopefully pulling the car in the trailer next year.

A 50amp to 30amp adapter just incase it's needed at the track. I used a 50% coupon at FFH. $11

Then I picked up a small Cman multimeter to put in the trailer to some small trouble shooting at the track if needed. My thoughts were mainly to check voltage and continuity. $9

What isn't pictured as I went back to FFH with another 50% coupon and picked up a 25' 30amp RV cord for $25.

 

[CSRPenFab]

Not quite a tool, but a tool box! Picked this beauty up at Lowe's today and saved $300 with the Black Friday special.

 

[winlinmac]

Middle Box from Craftsman's Heavy Duty line

 

[Heavy Metal Doctor]

10 ton battery cable crimper and cable cutters

Now that's one tool I would love to get! Very Nice!

 

[zach540]

Came in on Wednesday afternoon!

 

[WWheeler]

Came in on Wednesday afternoon!

Tormach 770 CNC
Holy ****! You win!

 

[Project_shadow]

Not quite a tool, but a tool box! Picked this beauty up at Lowe's today and saved $300 with the Black Friday special.

I like it, the only one they had at mine was damaged though and only 100$ off retail, even though the top drawer was pretty much stuck closed


Sent from my iPhone using Tapatalk

 

[MattVette89]

As an update to anyone following, I did return the crappy Craftsman hex t-handles.

This arrived today which had me excited. I've been looking several months for a matching logo/vintage wrench in excellent condition:



Right at home with the others:

 

[NUTTSGT]

A buddy of mine and I went to a swap meet today and I didn't buy much. I grabbed a bag of fine 2" scotchbrite pads and also found a cheap "Benchtop" brand 100' tape meaasure for $1.

We swung by menard's on the way home and I grabbed two 6 piece sets of brushes (99¢), Stanley hobby knife set and a spare 20' tow strap to toss in the trailer.





After "The Game" the wife and I went to BK to grab some supper and headed over to Menard's where I grabbed this pair of Stanley tape measures 12' and 16', a couple of spring clamps (Christmas stocking project) and a zipper tool pouch (free after rebate). She got some new lights for the Christmas tree and a huge stocking.


You can see the stocking in the background in relation to 6" squares, this will be going on our front door instead of a wreath.

 

[dede2897234]

Here are a couple items I picked up during the last few weeks:

Sears.com:

Knipex Mini Pliers Set with Belt Pouch (Model# 00 20 72 V01; Made in Germany)

This set comes with a 5" Cobra and a 6" Pliers Wrench pliers.









C & L Tool Distributors (Coraopolis, PA):

Knipex Cobra Extra Slim Pliers (Model# 87 51 250; Made in Germany)

I've been to this store twice in 2015. Their showroom is awesome in terms of what they stock. Better bring a fat wallet and a shopping list when you come! Here is a stocking vendor list of what this company sells and can order: LINK.

I was hoping they would stock them since they had a semi large Knipex selection the last time I was there. When I called, the salesperson told me it was in stock. With U.S.P.S. Priority 2-day shipping, the total cost was $42.04. Very reasonable!










David

 

[zzzz]

NOS Mitutoyo indicator stand.

 

[krc328ic]

Ridgid Miter Saw stand for my DWS709. HD Black Friday deal, 50% off. Works great! Also want to try out pocket screwing so I picked up this Kreg kit. Haven't used it yet, but looks simple enough.

 

[rmsg0040]

Light from homehardware, $20, 3.7V 2200mah battery, magnetic base, swivel head



Been taking a welding course, teacher is a self employed blacksmith, he brought in his anvil and swage block, everybody got to make a fireplace poker, we used oxy acet

 

[rebelmyers1]

Bought a dewalt bit set about the only thing I didn't have two of that was on sale


Sent from my iPhone using Tapatalk

 

[Jacobson]

LED lights are the best

 

[Dingleburry]

My latest shopping spree. Backpack was used/new to me.
What a badass set of wrenches. And i love the feel of the ratchet. I might have a new addiction.

 

[dodge610]

Just picked up the newest addition to the tool collection.


Sent from my iPhone using Tapatalk

 

[2002maniac]

What a badass set of wrenches. And i love the feel of the ratchet. I might have a new addiction.

Very nice! I have that ratchet and love it!

 

[Project_shadow]

Just picked up the newest addition to the tool collection.


Sent from my iPhone using Tapatalk

I should have bought them for the bf price


Sent from my iPhone using Tapatalk