Show your new tool arrivals

[Dr.JohnnyFever]

Please let me know how you like them and if you got a good deal as I am in need of one of those to do some suspension work on my car.

I like them fine so far - however, I have not used them in anger yet.

They seem to be of good quality. There is a warning on the pouch noting that they are for low toque applications. I acquired them after a particularly vexing Honda tie-rod job.

 

[mike528]

 

[NUTTSGT]

Christmas gift from one of the guys at work. I told him about the ACE hardware sale a short time ago.

 

[Dr.JohnnyFever]

When I got mine I first thought I had wasted money. Instead, it became one of my favorite tools.

 

[xs650shawn]

Set of Proto insulated adjustable wrenches from my brother, and an Estwing hammer from each of my daughter's for Christmas.

 

[anthonysps]

Sent from my iPhone using Tapatalk

 

[Daz-scotland]

When I got mine I first thought I had wasted money. Instead, it became one of my favorite tools.

Me too but it's a great ratchet. It's replaced my 3/8 cordless impact for most things now

 

[Qualitytools]

I like them fine so far - however, I have not used them in anger yet.

They seem to be of good quality. There is a warning on the pouch noting that they are for low toque applications. I acquired them after a particularly vexing Honda tie-rod job.

Thanks! yes I need them to just hold the Sway Bar End Links while replacing them on my BMW, May I ask where you got them and how much?

 

[jumbojak]

I have that Snap On pocket screwdriver. Hand little sucker and it won't worry a hole in your pocket. Mine is orange though.

 

[Finky198]

That's a great little screw driver you got ^^^ one of my favs...

 

[dodge610]

Did a little after Christmas shopping gifts from me to me. [emoji41][emoji41]









Sent from my iPhone using Tapatalk

 

[Dr.JohnnyFever]

Thanks! yes I need them to just hold the Sway Bar End Links while replacing them on my BMW, May I ask where you got them and how much?

$63 from Zoro using a 30% off code.

https://www.zoro.com/facom-open-end-wrench-set-15-deg-6-pc-fm-31je6t/i/G0810311/

 

[G-Ram]

Proto 1/2" drive impact swivel sockets, 13mm-19mm. Been eyeing up this set in my Amazon wish list for quite some time. Price dropped from $200 to $90 for the set so I jumped on it. Next day they were back up to $240. Haven't used them yet but they look like they'll do the trick.




Sent from my iPhone using Tapatalk

 

[Revelations]

Waiting for my direct deposit tomorrow morning, these will be on my doorstep Friday afternoon. I've been lusting over the Homak 72" for a year.

Sent from my SM-G930VL using Tapatalk

 

[gmwilkes]

Made a list for family of some things I wanted to build my basic hand tool stock up. Nothing overly special, but they will definitely get their use.

 

[BaMaDuDe87]

Waiting for my direct deposit tomorrow morning, these will be on my doorstep Friday afternoon. I've been lusting over the Homak 72" for a year.

Sent from my SM-G930VL using Tapatalk

Will have some of those connectors coming soon as well. Looking forward to trying them out.

Sent from my SM-N910V using Tapatalk

 

[NUTTSGT]

Sent from my iPhone using Tapatalk

I have that Snap On pocket screwdriver. Hand little sucker and it won't worry a hole in your pocket. Mine is orange though.

That's a great little screw driver you got ^^^ one of my favs...

As soon as I saw that, I was think I need one of those. Two back to back members saying it's good makes me want it even more.

 

[anthonysps]

As soon as I saw that, I was think I need one of those. Two back to back members saying it's good makes me want it even more.

I believe snapon discontinued it. I found it on ebay and paid more than I should have but it was new in original packing. Haven't used it yet but I'm sure I'll like it


Sent from my iPhone using Tapatalk

 

[canuckian]

I believe snapon discontinued it. I found it on ebay and paid more than I should have but it was new in original packing. Haven't used it yet but I'm sure I'll like it


Sent from my iPhone using Tapatalk

they started making them again a year or so ago and they're still available from Snap On. The part number is SDDDM1AR for red, SDDDM1AO for orange and SDDDM1AG for a green one. I think they're around $16. They are handy little units. I usually have one in one pocket or another.

 

[bob_the_builder]

Does Snap on still offer the traditional pocket Screwdriver (flat tip)?

Bob

 

[canuckian]

Does Snap on still offer the traditional pocket Screwdriver (flat tip)?

Bob

yes...SDD204O

 

[pstemari]

Sweet bit of us steel. Do you go through drills fast enough to need the dispenser?

Sent from my Nexus 6 using Tapatalk

 

[JAKE-THE-TOOL-MAN]

Proto 1/2" drive impact swivel sockets, 13mm-19mm. Been eyeing up this set in my Amazon wish list for quite some time. Price dropped from $200 to $90 for the set so I jumped on it. Next day they were back up to $240. Haven't used them yet but they look like they'll do the trick.




Sent from my iPhone using Tapatalk

Man I wish I could of taken advantage of that deal! Thats a steal!

 

[saulvg99]

Got a bit carried away using and abusing the $200 home depot discount when you buy one of those one key kits and another tool. Sooner or later I was planing on buying most of this tools and I will use them for my work, so overall I think I did pretty good. Payed less than $600 for all tools pictured here.

Sent from my Z958 using Tapatalk

 

[XxToolAholicxX]

Got a bit carried away using and abusing the $200 home depot discount when you buy one of those one key kits and another tool. Sooner or later I was planing on buying most of this tools and I will use them for my work, so overall I think I did pretty good. Payed less than $600 for all tools pictured here.

Sent from my Z958 using Tapatalk

Looks like you went all out..

 

[Xmoonstompx]

Sent from my LG-H901 using Tapatalk

 

[saulvg99]

Looks like you went all out..

Haha. Maybe, but all tools that are going to help make my job easier and are going to get plenty of use. So far I'm loving the little m12 impact, that one and the m12 ratchet are my favorite so far. Only regret is that I waited so long to buy them.

Sent from my Z958 using Tapatalk

 

[dodge610]

Used some of my Christmas gift cards. A few small goodies. [emoji4][emoji851]


Sent from my iPhone using Tapatalk

 

[lugnut71]

you can also still get the snap on pocket screwdriver in clear, sdd214

 

[Jim Johnstone]

I got a few bucks for chistmas so I swung by home depot today and replaced my 30+ year old black and decker jigsaw.

 

[90zcar]

Most of the time people post pics of tools they bought. I figured I'd post pics of the tools I "found"
My wife and I just bought a house that we moved into last month and as we were cleaning the basement and garage I found a couple oddball sockets and an extension. They are all actually name brand tools! Whoever lived here used good stuff!
2 snap on 1/4 drive 6&11mm chrome sockets
Craftsman 3/8 drive 10mm socket
MAC 8" 3/8 drive extension
Craftsman 3/8" drive 10mm deep chrome
MATCO 3/8 drive 18mm impact socket



Sent from my iPhone using Tapatalk

 

[KnurledNut]

you can also still get the snap on pocket screwdriver in clear, sdd214

And it doubles as a spark tester...
;-)

 

[Mastermind]

I'd love to find that extension. None better as far as feel. The kneeling where it's supposed to be. Anyone besides Mac and koken do that?

 

[Skin]

Matco for the last few years.

 

[yamaha0343]

Birthday present from dad since I wore out his 2 1/2 ton jack lol


Sent from my iPhone using Tapatalk

I've had this jack a few years and have had zero issues with it for home garage use. Works great for my Tundra and the wife's SUV.

 

[yamaha0343]

Forgot to grab pics before I left for work, but have done pretty well in the last few days.

Scored a Husky 30 gal. quiet compressor and 50ft 3/8ths air hose from my Dad
Husky compressor

Had some American Airlines miles about to expire, so used them on a $50 Sears gift card and bought:
Craftsman 20 piece compressor accessory kit

Craftsman 3-ton High Lift Jack Stands

Also picked up a few tool bags and a different tire chuck. Total was $68, but using the gift card and shop your way surprise points I ended up spending $0.76 out of pocket for all of that. No wonder they're going out of business.

 

[Project_shadow]

I've had this jack a few years and have had zero issues with it for home garage use. Works great for my Tundra and the wife's SUV.

For 100$ kit I won't complain with a couple years out of it, I wore out the jack dad has, idk If it's harbor freight or menards brand


Sent from my iPhone using Tapatalk

 

[yamaha0343]

I've probably had mine 5 or 6 years. Bought it to replace a cheap HF jack that failed and reinforced my belief in using jack stands.

 

[Project_shadow]

I've probably had mine 5 or 6 years. Bought it to replace a cheap HF jack that failed and reinforced my belief in using jack stands.

I used them anyway but I could hear it starting to leak down ever so slightly so I started just leaving all the weight on stands when I could, usually they were a fail safe, but now I have plenty of stands at least lol


Sent from my iPhone using Tapatalk

 

[Qualitytools]

$63 from Zoro using a 30% off code.

https://www.zoro.com/facom-open-end-wrench-set-15-deg-6-pc-fm-31je6t/i/G0810311/

Thanks, Enjoy!