Show your new tool arrivals

[okie18]

Not sure if it makes any difference, but I believe the mini dominator set is made offshore in Tawain.

Sent from my Z962BL using Tapatalk

They are. The pro versions are 3'ish inches longer than the select though. A pick that's almost a foot long kinda limits the places it can go.

 

[dodge610]

A few more small tools for the shop both out of the Hot Deals section couldn’t pass on the flap discs at a $1.00 a piece.


Sent from my iPhone using Tapatalk

 

[dsmnickk90]

Presumably a 1/4 impact lol...

My Astro impacting air rachet or my Milwaukee impact driver with the 1/4 SK locking impact bits.

 

[Sam'sAutoParts]

Got this off Amazon with some gift cards from Christmas. Will replace my 84 tooth Gearwrench locking flex.

 

[Heavy Metal Doctor]

Added this this week:

 

[Tenex]

Got this off Amazon with some gift cards from Christmas. Will replace my 84 tooth Gearwrench locking flex.

What are your thoughts on the Gearwrench?

 

[Sam'sAutoParts]

What are your thoughts on the Gearwrench?

I hate it, but maybe I got a bad one. The locking function is worn out already and I really didn’t use it all that much. I wish I had gotten the regular long handle 3/8 or a Carlyle locking flex. Not sure I will ever buy another Gearwrench ratchet, based on my experience.

I used my SK today and it is great, may have to get a 1/4” as well.

 

[M6erfan]

Bosch CLPK27-120 12-Volt Max Lithium-Ion 2-Tool Combo Kit and Makita T-01725 Contractor-Grade Bit Set, 70-Pc came from Amazon today...

 

[Tenex]

My first Wrightgrip 2.0

 

[shanny19]

My first Wrightgrip 2.0

Do you have an actual application for that wrench?? I finally caved to my OCD and got a 1 3/16 socket, but haven't needed it.

 

[Tenex]

Do you have an actual application for that wrench?? I finally caved to my OCD and got a 1 3/16 socket, but haven't needed it.

No. Wait, yes. You mind your own business.

OCD is expensive.

 

[kball]

Over the last two months I've acquired a lot of tools for free or very cheap from Sears. Playing the games is a pain but it pays off.

This is just the Knipex I've got over the last two months for $40 out of pocket.

Long live Sears!!! LOL

 

[ocloc24]

Seen everyone getting this light recently, had to try it and fell in love. The 3/8 in a 1/4 body, I have the flex head but apparently I just don't have enough ratchets. I love my ratcheting screwdriver so much i bought one for home.

 

[jonshonda]

Snap on SAE Wrenches
Cornwell Metric Wrenches
Snap On Ratchet
Snap on Universal Sockets
Misc Punches and Chisels
Irwin Spade Bits
Dasco PRO Chisels
Swiss Army Knife
Channel Lock Pliers

<a data-flickr-embed="true" href="https://www.flickr.com/photos/154822526@N03/39677418631/in/dateposted-public/" title="Tools"><img src="https://farm5.staticflickr.com/4617/39677418631_d3b2449e1c_c.jpg" width="800" height="376" alt="Tools"></a><script async src="//embedr.flickr.com/assets/client-code.js" charset="utf-8"></script>

 

[landrover bodger]

new led head torch and a bead breaker tried it today works very well

 

[dutchgray]

Scored a new Sioux 2000 rpm right angle air drill off ebay for cheap.
View media item 79464

 

[dodge610]

Got this little toy to play with had points expiring. $22.00 out the door one of them toys you just know. That you have too own. Lol



Sent from my iPhone using Tapatalk

 

[Snap_cap]

Do you have an actual application for that wrench?? I finally caved to my OCD and got a 1 3/16 socket, but haven't needed it.

No. Wait, yes. You mind your own business.

OCD is expensive.

 

[one9gt]

Got this little toy to play with had points expiring. $22.00 out the door one of them toys you just know. That you have too own. Lol



Sent from my iPhone using Tapatalk

I've got the HF version and use it to sharpen my tungsten


Sent from my iPhone using Tapatalk

 

[dodge610]

I've got the HF version and use it to sharpen my tungsten


Sent from my iPhone using Tapatalk

Got a good deal on this one. If i hadnt i would have the HF one too

 

[Chaplian]

Got my new gen 5 brushless Ridgid 3/8 impact! Ridgid doesn't actually make this, but there's a seller on eBay who modifies and sells them. It's perfect for my needs.

 

[purplezr2]

Got my new gen 5 brushless Ridgid 3/8 impact! Ridgid doesn't actually make this, but there's a seller on eBay who modifies and sells them. It's perfect for my needs.

What was it before, a 1/4 impact?

 

[Chaplian]

What was it before, a 1/4 impact?

Yep, it was a 1/4 impact driver, model number R86037. Main reason I got it instead of just using the impact driver with an adapter was torque loss and extra length due to the adapter.

 

[Odes]

This my new knipex cobra I need something to spend enough at summit racing to qualify for free shipping so I picked these my first knipex pliers

 

[Odes]

I forgot the pic

 

[PR1Gneon]

Pittsburgh torque adapter.

Sent from my SAMSUNG-SM-N920A using Tapatalk

 

[garthg]

Walking the Mall with SWMBO I actually picked a couple of NOS Craftsman USA tools still in open stock at Sears in good sizes. 9mm 1/4" drive deep socket and 15mm combination. I already had a boxed NOS combo set from 8 to 14mm. With this and a 17 and 19mm Snap On I had already I have a complete US set.

With SYWR points I walked out for $4.

 

[ronaldSwanson]

Pittsburgh torque adapter.

Sent from my SAMSUNG-SM-N920A using Tapatalk

Are these decent enough for occasional use? Thought about getting one.


Sent from my iPhone using Tapatalk

 

[L.Cheapo]

View media item 79564
I had no idea such a pulley alignment tool existed. I need this for a squeaky Ranger. The form-a-funnel will be better than the folded cardboard I've been using. And a new battery brush, since I broke my old one when it was really, really cold out. All USA made.

 

[jelrod1]

Some new Wright additions. Metric Wrightgrips and hex sockets not shown.

 

[Yarpo]

Not super new, but finally got to use my Neiko work light and the M12 ratchet

Now I'm waiting on my second battery from International tool, going on two months. Great stuff from them ...not

 

[toolmutt]

Belated Christmas gifts.

 

[toolmutt]

Closeup.

 

[PR1Gneon]

Are these decent enough for occasional use? Thought about getting one.


Sent from my iPhone using Tapatalk

Works good. For the price ($25) cant ask for anymore. AC Delco have one that seems better but cost X2.5.

Sent from my SAMSUNG-SM-N920A using Tapatalk

 

[Skin]

 

[kb1982]

Been ordering some SK Tuff 1 ratchets here lately. It all started with just grabbing a 1/4" drive for work. Well I liked it enough that I bought another for the toolbox along with a few more. Picked up the Proto 1/4" J4749XL just to try one out. Im quite impressed with the Proto, even being only 45 teeth.

Sent from my Z962BL using Tapatalk

 

[trytochaseme]

Grex 1850gb only a few rounds shot thru but so far i love it

 

[Ben1967]

Snagged a set of SK 1/4" deep impacts at Circle C Supply for $39. And a few other things to get me over the $50 free shipping...



I've never ordered from Circle C before but shipping was fast and communication was excellent.

Are they still on there?

 

[kb1982]

http://www.circlecsupply.com/sk-31020-12-piece-1-4-drive-6-point-metric-impact-socket-set.html

 

[four.cycle]

CM 1/4" set 4-12mm (mostly G)
CM 3/8" set 9-19mm (mostly -V-)
CM metric combos (VV)
Wright 5/8" SP socket
CM 13/16" SP socket

early Indestro 2850 "chromium vanadium" 1/4" breaker and a few sockets

figure I did okay for $10 bucks on Craigslist