Show your new tool arrivals

[M6erfan]

You guys got me, ordered....

Couple Vessel ball grip screwdrivers. Really love the feel of the ball grip in my hand - especially the larger one.

Vessel and whoever makes those pry bar thingies should send GJ a donation...

 

[Project_shadow]

Sandblaster from harbor freight, I'll never put another one together though

Sent from my SM-N950U using Tapatalk

 

[Bundoman]

Trying to stop gasping for air! New to me Champion compressor. I will need to add new motor controls as they were not included. Excited to fire this up!

 

[RacerX]

Sandblaster from harbor freight, I'll never put another one together though

Sent from my SM-N950U using Tapatalk

Hopefully you sealed all of the panel connections with rtv. They leak like crazy. I had one and had to deal it to make it usable. Finally upgraded to a 48" unit from Greg Smith Equipment.

Sent from my SM-N960U using Tapatalk

 

[16again]

1/4" to 1/2" adapter that I saw posted here.

 

[Project_shadow]

Hopefully you sealed all of the panel connections with rtv. They leak like crazy. I had one and had to deal it to make it usable. Finally upgraded to a 48" unit from Greg Smith Equipment.

Sent from my SM-N960U using Tapatalk

Yep, sealed everything, added rivnuts to glass holder and extra on the sides of window for extra sealing, added a vent to suction tube, I will get a different light today, and some connections to mount an air regulator to it in a different spot, I want to put it on a furniture dolly at some point as well and get a small vacuum to mount to it, and I need to finish my sheet metal brake so i can bend a shroud for exhaust cover so air flows low and across what I'm blasting, and get a different bucket to make a dust catch, I want to make it a single unit with everything attatched to it due to the size of my garage

Sent from my SM-N950U using Tapatalk

 

[PelicanPines]

BRB ordering a pry tool!

My new one arrived today from amazon... So nice... shoulda ordered 3... still waiting on my Snap On, Bluepoint version... of which I sold to a friend...

Don't think Strouty will break his... this is nice.

 

[Project_shadow]

10$ at lowes today, also got the 1" to 1-1/4" big wrenches for 15$

Sent from my SM-N950U using Tapatalk

 

[Sliding T-Handle]

This is one NICE inch pound screwdriver. I love it. I got 3 of them for $210. I don’t know why I did it I thought it was a steal and he had three available so I made an offer for all three. I gave my dad one. The Internet has them listed at much higher prices. I did plenty of research and I saw one particular video that sold me. Made in the UK. 10-50 in-lb


Sent from my iPhone using Tapatalk

 

[Sliding T-Handle]

I just can’t help myself. I love Wright Tool Double Pawl Ratchets. Strength of 41 tooth with the action of 82.


Sent from my iPhone using Tapatalk

 

[Elvie84]

Got myself a 4lb deadblow hammer and a 5 piece sidchrome A/F spanner set these are great tools.

 

[Elvie84]

I like the holder that wrench set comes in.



I wish that I had something like that for my 0 degree long double box ends.

There a really good set feel great in hand too.


Sent from my iPhone using Tapatalk

 

[Riverlos]

Unfortunately they forgot the box art. But this is from HJE


Sent from my iPhone using Tapatalk

 

[Qualitytools]

Got myself a 4lb deadblow hammer and a 5 piece sidchrome A/F spanner set these are great tools.

That wrench set and holder remind me of my USAG and Facom sets, they came with this type of holder Enjopy!

 

[Elvie84]

1/4" to 1/2" adapter that I saw posted here.

What is the quality like ?

 

[d.mcfarland]

OTC bearing driver set and Lang metric thread restorer. I wish the case for the thread restorer was smaller and better suited towards storage vs taking up half a drawer.

 

[16again]

What is the quality like ?

It’s top of the line. Koken makes some beautiful tools.


Sent from my iPhone using Garage Journal

 

[bobcatdan]

Replaced my horror freight 20 ton press with a 50 ton Nugier. Kept the 20 ton bottle jack and sold the frame for $20.

 

[Farmall450]

I have gone on a big shopping spree in the past 4 weeks, bought a Hypertherm 45XP, Hobart IronMan 230 MIG and a CNC plasma table (which hasn’t arrived yet).




Sent from my iPhone using Tapatalk

That's peak GJ performance.

 

[Farmall450]

Replaced my horror freight 20 ton press with a 50 ton Nugier. Kept the 20 ton bottle jack and sold the frame for $20.

Bottle jacks are cheap...why not just sell the whole thing for a cool $100 {more than $20 + value of the bottle}??


Speaking of HF, I snagged a 4# deadblow the other day. Can't really beat it for $10.

 

[bobcatdan]

Bottle jacks are cheap...why not just sell the whole thing for a cool $100 {more than $20 + value of the bottle}??


Speaking of HF, I snagged a 4# deadblow the other day. Can't really beat it for $10.

A lot of of the decision to keep the jack and sell the frame so cheap is there are about 5 or 6 HF presses on CL or MP that have been reposted forever that aren't selling for $75. Didn't know if a press frame would sell at all so priced it cheap and had 10 offers in 20 minutes. Just wanted it gone and if didn't sell would have cut it to use the metal or just scrap it.

 

[d.mcfarland]

Speaking of HF, I snagged a 4# deadblow the other day. Can't really beat it for $10.

Nice pun.

 

[Magnum440d100]

Had points to burn, so I got the Hansen tray. Walking out, the GearWrench was on the discount table. 50% off. And I had points still to burn. So out the door was $1.98!

 

[zmotorsports]

Replaced my horror freight 20 ton press with a 50 ton Nugier. Kept the 20 ton bottle jack and sold the frame for $20.

Nice.

I have had my 20-ton Nugier shop press for about 25 years now and love it. I bought it used and had to repack the ram but other than that it has been trouble free and a great asset to the shop.

 

[bobcatdan]

Nice.

I have had my 20-ton Nugier shop press for about 25 years now and love it. I bought it used and had to repack the ram but other than that it has been trouble free and a great asset to the shop.

Haven't gotten to use it yet, but one thing I like so far is the bed winch. Of all the presses I have used over the years, this is the first one that winch works awesome. The worm gear winch holds the bed perfect with the pins removed and its moves perfectly level that all the pins line up on the first try.

 

[IMStuner]

Sent from my iPhone using Tapatalk Pro

 

[Farmall450]

A lot of of the decision to keep the jack and sell the frame so cheap is there are about 5 or 6 HF presses on CL or MP that have been reposted forever that aren't selling for $75. Didn't know if a press frame would sell at all so priced it cheap and had 10 offers in 20 minutes. Just wanted it gone and if didn't sell would have cut it to use the metal or just scrap it.

Ah I gotcha. It's weird how different areas have different markets going on.

 

[Farmall450]

Nice pun.

Thank you lol

 

[WagonHo!]

Trajan 125 from Sawblade.com along with a cut stainless better blade. Love the variable speed and 4 3/4” capacity.
Picked up a accessories Wen table for vertical cutting.
Fast, easy, quieter and clean gave my nephew that filthy chop saw.

 

[bwringer]

I have that Lang set as well. They're fantastic (much more gentle than taps and dies with boogered threads), but that stupid flimsy case is an utter abomination. And yeah, it takes up an inordinate amount of space.

Maybe I should get motivated and make something out of a block or wood or whatever.

 

[mikeselky85]

Walked on to get a price on upgrading some of my cordless tools. Luckily my dealer had a promo kit that came with the ct761a, cts761a, ctr761c, ctl761 with two batteries. Decided to grab the underhood light and another batter as well.
Also not pictured is the KRL locker cover, but I’m still waiting on the locker to come in

 

[1320]

Got the pry bar in today from Yardstore. It's twice the size I expected, though.
It looks tough and useful.

 

[M6erfan]

Got the pry bar in today from Yardstore. It's twice the size I expected, though.
It looks tough and useful.

Yep. I thing a smaller 1/2 --2/3 size would be super useful too

 

[PelicanPines]

Got the pry bar in today from Yardstore. It's twice the size I expected, though.
It looks tough and useful.

Yep. I thing a smaller 1/2 --2/3 size would be super useful too

I love the size... it's goldylox for me... just right...

 

[eschoendorff]

Walked on to get a price on upgrading some of my cordless tools. Luckily my dealer had a promo kit that came with the ct761a, cts761a, ctr761c, ctl761 with two batteries. Decided to grab the underhood light and another batter as well.
Also not pictured is the KRL locker cover, but I’m still waiting on the locker to come in

What vehicle/motor are you working on in that pic? I don’t recognize it offhand

 

[mikeselky85]

It’s a Cadillac SRX 3.6. Heads and timing chain job 20 hrs total pay time

 

[Dennis Leigh Henry]

Some Estate Sale adds and one catalog order...

Second one is a What's it? Looks like a drive chain tool.. but it doesnt have a wrench or handle for the "press out" pin / element... Tool is Marked Ring Master, with a circled M, and Morse....

View media item 91537
View media item 91538
View media item 91539

 

[Mazdaratti3]

Walked on to get a price on upgrading some of my cordless tools. Luckily my dealer had a promo kit that came with the ct761a, cts761a, ctr761c, ctl761 with two batteries. Decided to grab the underhood light and another batter as well.
Also not pictured is the KRL locker cover, but I’m still waiting on the locker to come in

What did he get you for the 14.4V promo kit?

 

[Halfrican]

Picked up this old Craftsman 144 pc. set. It’s just missing the hex keys. It’s in pretty good condition overall, proudly used set. Gonna keep it around the house.

 

[IMStuner]

Was going to pick up some Irwin clamp but decided to get StrongHandTools ones






Sent from my iPhone using Tapatalk Pro