Show your new tool arrivals
- Thread starter sarel.wagner
- Start date
And I am actually being serious, I LOVE a tool box that costs more than a lot of cars. That is a fantastic box. If you dont really move it much, will be annoying when the back side tires need air. TPMS to keep tabs on them (ha ha)?
Strouty
Well-known member
It will be worse when a stray piece of molten metal melts through one and he has to call AAA to get his tire changed. 
Bobcat753
Well-known member
I've got a foot of clearance between the back of the box and the wall, I'm thinking of getting the jack stand kit for it to keep it off the tires and help keep the box stable.
Recent lurker here,
Just picked up a tool lot local to me
Ended up getting a nice MAC 3/8-13/16 crows foot set, SK 15/16-1 1/2 crows foot set, and two sets of Jumbo USA SAE craftsman professional combo wrenches sans one 1 1/4 4replaced with RP
Sent from my iPhone using Tapatalk Pro
Just picked up a tool lot local to me
Ended up getting a nice MAC 3/8-13/16 crows foot set, SK 15/16-1 1/2 crows foot set, and two sets of Jumbo USA SAE craftsman professional combo wrenches sans one 1 1/4 4replaced with RP
Sent from my iPhone using Tapatalk Pro
Attachments
My new Bahco/Snap On 36" long 1/2" drive breaker bar, along with the IBM/Snap On 1/4" drive breaker bar. Really needed the longer breaker bar, and the smaller one seemed like a good deal, so couldn't pass it up.
Attachments
Wamsutta
Well-known member
What do the tires say for max air pressure?
Bobcat753
Well-known member
Not sure about air pressure, but their capacity is 1100 Lbs each
Wamsutta
Well-known member
Do the tires have valve stems to put air into?
Farmall450
Well-known member
Yup, sickle section sharpener.
Not a tool worthy of this fine thread but I found it interesting... so here it is. I bought a wall hanger to hold the different attachments for my Dyson vacuum... In the bag... they sent me a COMBO DRILL PHILLIPS DRIVER... It's a first for me.
can you post a picture of the Dyson wall hanger? looking for one for the wife's tools
Negen
Well-known member
PelicanPines
ALLIANCE MEMBER
Nice!!!
Farmall450
Well-known member
KBigg
Well-known member
Re: Need help to ID Vise
I think its a craftsmen, google 5153 vise. Id post the link but my post count is currently 4 and i need 5 to post links lol
I think its a craftsmen, google 5153 vise. Id post the link but my post count is currently 4 and i need 5 to post links lol
It looks like the Duramax badge is on the hood, sweet. I wish those were just a little bigger inside so I could fit.
got2boostit2
Well-known member
Grinder and 4AH battery
Sent from my iPhone using Tapatalk Pro
It spins at what rpm?
Negen
Well-known member
davethorik
Well-known member
Re: Need help to ID Vise
Craftsman were always labeled. That is a Rock Island meant for private label sales.
Craftsman were always labeled. That is a Rock Island meant for private label sales.
PelicanPines
ALLIANCE MEMBER
2lb, 1lb 1/2lb OEM Deadblow hammers from AWD... $8 and change total... got to love it.
Farmall450
Well-known member
2lb, 1lb 1/2lb OEM Deadblow hammers from AWD... $8 and change total... got to love it.
Can't beat that with a...green deadblow.
PelicanPines
ALLIANCE MEMBER
The 1/2 pounder is officially now part of my go bag. The other two are being shipped to my big shed for those moments... wish I had something to hit that with...
Holt
Well-known member
Last edited:
Farmall450
Well-known member
You can't get 3x HF for $8. I just bought their biggest one over spring break for roughly that w/ a 25% off.
Nice! Spyderco makes the best work knives ever. I have a rescue for over 20yrs, never sharpened and its cut welding cable and everything else. Not recommending it though
OCD
Well-known member
Picked up the new 1/4" 14.4v long neck ratchet...
Got a pretty good deal on it, and some beer steins added in!!
Got a pretty good deal on it, and some beer steins added in!!
rshadd
Well-known member
I won this from DIYInsiders... I was notified in January that I won, but it took them more than 4 months to get it to me. Doubt I'll ever use it, but heck it was free so I ain't complaining.
OCD
Well-known member
I have one of those, good sounding little radio!! Rugged too!!
PelicanPines
ALLIANCE MEMBER
To those that might consider this holder... DON'T. It's a piece of garbage. The force you would need to use to insert a Dyson tool into this would yank drywall off your wall. Considering mounting it to a wood plank first.
Thanks I was just about to order one.
KBigg
Well-known member
Wow, what a deal! What's AWD?
EDIT: nevermind, I figured it out...Amazon Warehouse Deals lol
I bought this 2 pc Sunex die-grinder set for $38 on AMZN which I think is a great deal.
Also the 3M hub cleaner to use with the die-grinders.
Last edited:
PelicanPines
ALLIANCE MEMBER
OEM tools... folding pocket scraper with those hard plastic blades... Feels good in the hand too.
EDIT: Will be added to my go bag...
EDIT: Will be added to my go bag...
Last edited: