Show your new tool arrivals

[bert1913]

^^^https://parts.cat.com/en/catcorp/276-7018

 

[vertguy]

Decided it was time to upgrade the Portaband/Swag table setup. Both these tools should make a couple pending projects go much smoother.

 

[jwsia]

New tool Friday for me. FHLF80A. Used but near mint with no owner marks. Maybe a bit too nice of a ratchet for just a DIY guy like me. Pawn shop purchase 60$

 

[jimmyin3D]

I just hunted and couldn’t find any available. Gotta link?

Is there something similar to this for sale? Like amazon/eBay. The closest shop to me is about thirty miles away.

 

[DSLTECHMEDIC360]

These two arrived yesterday.
Time to see how they do. I’m used to my old 12volt dewalt 3/8 impact.


Sent from my iPhone using Tapatalk

 

[02Xterra]

Received the speaker and router bit set for my birthday but hadn't yet purchased the router.. so I ordered one from Acme tools and added a couple screwdrivers to get free shipping

Sent from my Pixel 2 using Tapatalk

 

[AA/FC]

A new bidirectional scanner.... the Autel MK908. It's been great so far!

 

[Lyt]

Some things from the past week and a half. Don’t drink and eBay.....or cruise the classifieds here.

What brand are those long reach pliers?

 

[sweet victory]

What brand are those long reach pliers?

I can see a Mac logo on there.

 

[BlueBomb]

Is there something similar to this for sale? Like amazon/eBay. The closest shop to me is about thirty miles away.

I just ordered it online. With tax and UPS shipping came out to $85. Checked out as guest. Only oddity was it asked for payment info after placing the order.

Sent from my SM-N960U using Tapatalk

 

[SD_40]

I can see a Mac logo on there.

Ding ding ding !

 

[davethorik]

Just snagged a set of these Masterforce USA strike cap pry bars at Menards. Same as the Craftsman set. Made by Wilde.

I like the green better than red.

 

[PelicanPines]

Saw the Dewalt fan in that thread... got me thinking I could use a fan... but it was more money than it used to be (bare tool $99)… So I was gonna finally buy into Milwaukee M18 … but then remembered... I have 3 Ridgid batteries... all for the portable Vacuum I have... googled... found this... arrived today via FEDEX... nice... $ 49

 

[upgrading]

Sent from my Pixel 2 using Tapatalk

Those screwdrivers look good.

 

[Lyt]

I can see a Mac logo on there.

Ding ding ding !

Just noticed it. Thank you.

 

[designer485]

I managed to snag a KRSC31PCM for $300 on Craigslist...had to drive a bit, but I think it was worth it. It was really dirty inside and out, so after a quick scrub it is presentable.

Side panels removed.

After a scrub.

 

[02Xterra]

Those screwdrivers look good.

Used the phillips head a bit today, I like it so far! The grip is quite comfortable. Made in USA with global components, the shanks have USA engraved in them and look the same as my Mac screwdrivers

Sent from my Pixel 2 using Tapatalk

 

[Farmall450]

Received the speaker and router bit set for my birthday but hadn't yet purchased the router.. so I ordered one from Acme tools and added a couple screwdrivers to get free shipping

Sent from my Pixel 2 using Tapatalk

Nice! I'd like to have the router. Not at F&F yet, unfortunately, to benefit from any sales running.

The speaker has caught my attention, too.

 

[02Xterra]

Nice! I'd like to have the router. Not at F&F yet, unfortunately, to benefit from any sales running.



The speaker has caught my attention, too. [emoji481]

I gotcha. I was going to wait for a coupon to come up from Acme, but since I got the bits I went ahead with it. The speaker is great, sound quality is good and goes pretty loud!

Sent from my Pixel 2 using Tapatalk

 

[davethorik]

Just snagged a set of these Masterforce USA strike cap pry bars at Menards. Same as the Craftsman set. Made by Wilde.

I like the green better than red.

Here are some better pics, that sun was so bright earlier I couldn't tell it was out of focus. Item # 243-4680 is for 3 pc set, bars not marked with individual part #s. The Menards I got this from had the set but no singles. It was $24.99. Includes 12", 17", & 25" just like Craftsman.

Interestingly, not marked about strike cap capability.

 

[Farmall450]

Saw the Dewalt fan in that thread... got me thinking I could use a fan... but it was more money than it used to be (bare tool $99)… So I was gonna finally buy into Milwaukee M18 … but then remembered... I have 3 Ridgid batteries... all for the portable Vacuum I have... googled... found this... arrived today via FEDEX... nice... $ 49

I'm enjoying my fan. Tho $49 is a very attractive price, esp if you scammed free shipping.

Also, I got an unexpected impulse buy (but good deal). I was using the floor model, and it was so darn powerful (for the small size) I pulled the trigger.

 

[dodge610]

More goodies from HF sale the 3 pic is the HF wool blanket got a new tool box to cover.


Sent from my iPhone using Tapatalk

 

[NKlamerus]

Archer Wire Strippers at Goodwill for 3.99

 

[16again]

Couple of items yesterday. Wanted to get a wood handle hammer. Never had one all my years in the window and door business. Also some impact bits for my MAC hand impact driver.


Sent from my iPhone using Garage Journal

 

[sweet victory]

Archer Wire Strippers at Goodwill for 3.99

Those look like rebranded Ideals. Probably my favorite style of strippers. You can order replacement blades, just FYI. The blades have various gauge strippers, in case you need something different too.

 

[Farmall450]

Courtesy of a fellow GJer

I also got a heavier heated coat for next winter. Now's the time to buy!

 

[Real_PhillBert]

These two arrived yesterday.
Time to see how they do. I’m used to my old 12volt dewalt 3/8 impact.


Sent from my iPhone using Tapatalk

Is that a Tool Vault box? If so, how do you like it? I'm really thinking hard about their Elite 84" box.

 

[PelicanPines]

Saw the Dewalt fan in that thread... got me thinking I could use a fan... but it was more money than it used to be (bare tool $99)… So I was gonna finally buy into Milwaukee M18 … but then remembered... I have 3 Ridgid batteries... all for the portable Vacuum I have... googled... found this... arrived today via FEDEX... nice... $ 49

I'm enjoying my fan. Tho $49 is a very attractive price, esp if you scammed free shipping.

Also, I got an unexpected impulse buy (but good deal). I was using the floor model, and it was so darn powerful (for the small size) I pulled the trigger.

Holy ****... I'm loving this Ridgid Fan... It has a speed dial... and goes way down to a gentle whisper breeze … up to "help, my beard is in my eyes"... well not really that high... but the slow is what i'm loving.

I have a very expensive Hunter Retro Fan in my living room... the low speed is way too fast... this Ridgid is great... the Ridgid does not fit my living room décor "according to Mrs Pines"... so I can't keep it there.

Just wanted to let everyone know how great this fan is. It can work off an 18v Ridgid battery … or … electrical plug.

Before you ask... no... the fan won't charge the batter... it's a one or the other choice... battery or plug.

 

[DSLTECHMEDIC360]

Is that a Tool Vault box? If so, how do you like it? I'm really thinking hard about their Elite 84" box.

Yes it is! I like it, the drawer liners are not the best though. My wrenches slide but that can be fixed. I wish the 84 was out when I got mine.


Sent from my iPhone using Tapatalk

 

[Farmall450]

Holy ****... I'm loving this Ridgid Fan... It has a speed dial... and goes way down to a gentle whisper breeze … up to "help, my beard is in my eyes"... well not really that high... but the slow is what i'm loving.

I have a very expensive Hunter Retro Fan in my living room... the low speed is way too fast... this Ridgid is great... the Ridgid does not fit my living room décor "according to Mrs Pines"... so I can't keep it there.

Just wanted to let everyone know how great this fan is. It can work off an 18v Ridgid battery … or … electrical plug.

Before you ask... no... the fan won't charge the batter... it's a one or the other choice... battery or plug.

I've only used the lower range on the DeWalt too. It's great right next to the desk. Tho it's cold enough you barely need it now

 

[sweet victory]

Nice sale going on for the 4 way angle wrenches, and couldn't resist. Plus I wanted more raffle entries for the traeger smoker

 

[HotWire]

My Wife just bought me this to help start my business. Found it used locally.



It’s so tiny.




Sent from my iPhone using Garage Journal

 

[Strouty]

She is a keeper!

 

[Farmall450]

I finally completed the RHFT collection, by a reasonable seller with Make an Offer on his 3/8" long flex RHFT auction.

Now where to put the displaced long flex 1/2 dual 80

 

[Mr. Tool]

These Snap-On SAE & Metric nut driver sets look AWESOME!!

Snap-On Sae and Metric nut driver sets.

 

[KBigg]

I finally completed the RHFT collection, by a reasonable seller with Make an Offer on his 3/8" long flex RHFT auction.

Now where to put the displaced long flex 1/2 dual 80

Send it to me, I can store it for you.

 

[Farmall450]

These Snap-On SAE & Metric nut driver sets look AWESOME!!

Wow, they do!

Send it to me, I can store it for you.

I managed to squeeze it in. Maybe a ratchet rack, holding them on the side, would be nice. Although all the different handles might make that difficult.

 

[sweet victory]

Now where to put the displaced long flex 1/2 dual 80

This statement makes me feel like I'm seriously missing out on something. My dual 80 1/2" drive locking flex head ratchet is easily my favorite ratchet!

 

[davethorik]

This statement makes me feel like I'm seriously missing out on something. My dual 80 1/2" drive locking flex head ratchet is easily my favorite ratchet!

You're not missing anything. Lol

 

[Jack84]

Found Locally. Now i can fix stuff like a master.