Show your new tool arrivals

[alcorelli]

Nice! I picked one up and did a full tear down last fall before I got busy with work season. http://https://www.garagejournal.com/forum/showthread.php?t=433607

I’m done with work for the year so just waiting on all of the electrical stuff I order to show up to finish wiring it.

Just installed a Teco VFD and programmed it this morning. Tramming and setup tomorrow.
First chips too.

Sent from my SM-G975U using Tapatalk

 

[jeffmoss26]

new tamperproof bits/driver and some wago connectors from Newark
gloves from ebay

 

[tylerg1]

new tamperproof bits/driver and some wago connectors from Newark

gloves from ebay

What is that license plate in the background?


Sent from my iPad using Tapatalk Pro

 

[jeffmoss26]

Arizona masonic plate from a friend.

 

[Wamsutta]

My 10" saw came in the mail. Couldn't resist the $150 discount promo for $500 orders. This brought the price down to $350 shipped.

I'm looking at the tools in the background.

 

[pioneer1]

Cherry tree in front of the house. Was damaged in the 1990s during a storm. However, it is still growing to this day. Wife's favorite tree. Wants to have coffin made, etc. I just grin and say yes.
Sent from my SM-G975U using Tapatalk

Wow, she's let you have those sitting around for 20yrs. lol

 

[PelicanPines]

Don't tell your wife... "there is no way we have enough wood for a coffin, how about an urn?"

 

[anndel]

Something to play with while I'm home...

Sent from my SM-G975U using Tapatalk

Sweet!

 

[Dan8906]

New welding setup

 

[skulldrinker]

got a few things
new tips for my 70s sears indicator
just won the bid on an AMMCO indicator
should arrive tomorrow
Screw Checkr inch and metric
3 small flywheel centering cones for my brake lathe

 

[Gears_call]

Just a couple new things for me


Sent from my iPhone using Tapatalk

 

[Gears_call]

And for comparison Of the new 1/4 ratchets vs the 3/8


Sent from my iPhone using Tapatalk

 

[Qualitytools]

Just arrived form the classified from member WCP0611, Thanks for the ratchet! a 3/8 Swivel Head Carlyle ratchet. Also compared to my WERA 3/8 Swivel, a big difference in size.

 

[cstmg8]

Amazon warehouse thread goodies:

Sent from my Pixel 3 XL using Tapatalk

 

[OCD]

Just a couple new things for me

Nice haul!!

 

[DuratecMan10]

VDiagtool OBDII reader that was given to me as a gift. Works great, goes up to 1996 vehicles and above.

BlackVue trim tool. Fantastic and sturdy.

Used both today on a Volkswagen.


Sent from my iPhone using Tapatalk

 

[sweet victory]

Hmmm... That size is a lot more likely to get everywhere, and I'm not working with big clamps...

Exactly my thoughts. Easier to get your hand + tool into some spots. I don't care for having to use remote hose clamp pliers when what I'm working on is right in front of me. A bit awkward holding you arm out to keep the cable out of the way.

 

[sweet victory]

I'm looking at the tools in the background.

You might like this one more - took it after installing the slots n dots monitor mount.

 

[M635_Guy]

Exactly my thoughts. Easier to get your hand + tool into some spots. I don't care for having to use remote hose clamp pliers when what I'm working on is right in front of me. A bit awkward holding you arm out to keep the cable out of the way.

I wound up ordering it from HD, along with 180 and 250 Cobras. Hypothetically it's all ready for pickup tomorrow, but I kinda doubt it.

 

[Caparris]

My 10" saw came in the mail. Couldn't resist the $150 discount promo for $500 orders. This brought the price down to $350 shipped.

Is the $150 off $500 deal still going?

 

[Markoos]

DuratecMan10 - bad news, P0420 always turns to be broken cat - $$$.

 

[anndel]

Cherry tree in front of the house. Was damaged in the 1990s during a storm. However, it is still growing to this day. Wife's favorite tree. Wants to have coffin made, etc. I just grin and say yes.

Sent from my SM-G975U using Tapatalk

Wow, awesome!

 

[Smokeshow69]

You might like this one more - took it after installing the slots n dots monitor mount.

My ocd likes this picture but those gloves are getting me. Can you push that glove back in the box and retake? [emoji23][emoji41]


Looking for a craftsman heritage era 10 drawer top chest

 

[sweet victory]

Is the $150 off $500 deal still going?

I believe it doesn't expire until May. Acme, ToolNut, Home Depot, CPO, etc. are all offering this Milwaukee special.

 

[Formerjeeper]

Facom filter wrench and 467 ratcheting wrench set from PrimeTools UK

 

[dalehsc]

Facom filter wrench and 467 ratcheting wrench set from PrimeTools UK

Is the 9mm,an unused wrench?

 

[setup]

I really like Facom brand design. It's so fresh and modern.

 

[DuratecMan10]

DuratecMan10 - bad news, P0420 always turns to be broken cat - $$$.

That's what I'm going with, either that or a sensor. It's an '01 Passat wagon with 178k so it would make sense. It had the evap system leak code as well but that was the gas cap seal had dried up and air was leaking in.


Sent from my iPhone using Tapatalk

 

[quadrcr87]

Thanks to Zmotorsports for the recommendation and deal code for some flap disks. Looking forward to my next metal project.




Sent from my iPhone using The Garage Journal mobile app

 

[dutchgray]

Is the 9mm,an unused wrench?

Its not a size found in metric standards, but there are non standard fasteners that are 9mm hex, I have never used a 9mm myself, so its a size you can leave out of a ratchet wrench set to reduce cost.

 

[setup]

Bought a few days ago this rebranded INBUS set from Format. It's also the same as the Hazet 2105LG/9HC, but I think they discontinued that, and now only have the non-colored version.

I also bought this set from Hazet.

 

[jeffmoss26]

Abus as in the padlock company?

 

[OCD]

I picked up a 10 ton body kit,

3/8 shallow 12 point sockets, for the bolts on my custom exhaust... Ratchet, because pearl blue... I had a red FHLD80, but gave it to a buddy when I got this one...

AP shorty blow gun,

I'm trying to do my part helping the economy, so I picked up these too!! My Snap On Buddy got a golden wrench for that week of sales!! Lol...

This is for stuff that won't fit in my blast cabinet,

One thing I never took into account was the price of good parts washer solvent, and I need at least 25 gallons...

 

[wkndwarrior29]

[QUOTE
One thing I never took into account was the price of good parts washer solvent, and I need at least 25 gallons...[/QUOTE]

The nice thing about that style of washer is that you can install a drain on the bottom and leave ~15-20 gallons of water in the drum then just drain some off to clean it. The solvent should sit on top - mineral spirits will anyway.

 

[setfocus]

Is the 9mm,an unused wrench?

Its not a size found in metric standards, but there are non standard fasteners that are 9mm hex, I have never used a 9mm myself, so its a size you can leave out of a ratchet wrench set to reduce cost.

I've run into 9mm brake caliper bleeder screws but I think that's about it

 

[landrover bodger]

timing pin set for landrover tdv6 fan wrenches and a chipping hammer

 

[setup]

Abus as in the padlock company?

Oh, Fail. I meant INBUS.

 

[cstmg8]

Rapala filet knife.

Sent from my Pixel 3 XL using Tapatalk

 

[M635_Guy]

Some gray Knipex to keep my silver stuff company

Was happy to find that the 180mm clamp plier was available from HD

 

[jeepinerdeep]

Picked up a 6" grinder, looking forward to the consumables getting here so I can try it out. Never owned a 6" on the smaller frame size.