That's a very large Snap-on Tax for 4 pry bars. Unless you are expecting to break them frequently?
Show your new tool arrivals
- Thread starter sarel.wagner
- Start date
BlakeTheCarGuy
ALLIANCE MEMBER
Nope not expecting to break them. Just like them very well. Could of went with the Walmart ones or whatever I’ve got several Craftsman ones but I like Snap-on for their design and quality.
Snapped-off
Well-known member
Picked up a NOS tune up kit for the 3/4" Blue Point impact I got from the classifieds here. $25 from feebay.
German Satin
Well-known member
If there's one tool to not cheap out on it's the humble punch. Those Wilde ones look the bizzness!Wilde 5pc Pin Punch Set
Good for him, buy quality tools if you're going to stay in the game and then you don't need to buy them again, ask me how I know.If not for Blake, this thread would have half the posts latelyYour snap on guy must love you! And if you keep buying like this, you're going to need to make another trip to HF for a duplicate box setup
KnurledNut
Well-known member
Dear Makita,
Send me some socks and ill wear yours instead.
Sincerely,
K-nut
.jpg
Send me some socks and ill wear yours instead.
Sincerely,
K-nut
.jpg
Last edited:
BlakeTheCarGuy
ALLIANCE MEMBER
I plan on buying that new cart next haha. I’m Snap-on guys top customer at my shop. I’m like a kid in a candy store when I get on that truck. It’s a wonder I don’t owe moreIf not for Blake, this thread would have half the posts lately
. He is good to me too so that’s always a plus. Never denied a warranty no matter where I purchased it or how it was damaged. He warrantied my entire screwdriver Tuesday as well just had to be ordered since it was a hard handle. The handle and shaft is broken.This is the way, buy, pay off then buy more, never get under water.I plan on buying that new cart next haha. I’m Snap-on guys top customer at my shop. I’m like a kid in a candy store when I get on that truck. It’s a wonder I don’t owe more
2ndGearRubber
Well-known member
I plan on buying that new cart next haha. I’m Snap-on guys top customer at my shop. I’m like a kid in a candy store when I get on that truck. It’s a wonder I don’t owe more
Box sure fills up fast, eh Blake?
BlakeTheCarGuy
ALLIANCE MEMBER
Absolutely. Haha. Trying to work more towards special stuff now. And I need a cart to roll around instead of having everything in my box too. Hopefully by Christmas I’ll have a cart. My goal was to have all my tool bill paid off by end of the year but I have a feeling that’s not going to happen.
rshadd
Well-known member
Dad dropped a bucket load of big wrenches that my Grandfather used in the Air Force working on C-130's. Some brands that I never heard of. Sizes range from 1-1/2" to 3/4".
Attachments
Last edited:
Rbcsci
Well-known member
That's a really nice looking box.
Added the top portion of my box today. It’s the new tool arrival.
BlakeTheCarGuy
ALLIANCE MEMBER
Hey I got one too. Wish mine was green lol. We used to be able to get blue, black or red now they will only give us red ones. I asked for a new one from parts today and got it haha. I might have to buy myself one for a cool color.sure shot sprayer
Snapped-off
Well-known member
Picked these up for the multi tool I just got. Made in Switzerland.
javyLSU
Well-known member
Finally ponied up for a torque screwdriver…
Snapped-off
Well-known member
What's the range on that? I've got one that goes to like 20 in-lbs. Dunno where I'll ever use it.Finally ponied up for a torque screwdriver…
javyLSU
Well-known member
11-29 in/lbs. I use it on AC electrical wire terminations.
Snapped-off
Well-known member
I guess I overshot. 3-15 in-lbs.
ste6168
Well-known member
Literally just bought a tool because I had a smaller version of that tool, and wanted to have a backup set... I have a serious problem.
I did not need this by any means, own several Knipex cobras, multiple pairs of channel locks, and had a lone 6" pair of these ViceGrips, so figured I would add the 10" to the family.
I did not need this by any means, own several Knipex cobras, multiple pairs of channel locks, and had a lone 6" pair of these ViceGrips, so figured I would add the 10" to the family.
Picked up some CAT tools today -
3/8" drive to 1/2" adapter and 1/4" drive Torx T10, T15, T20, & T25. All made by Snap-on.
6" #2 Phillips hard handle screwdriver. Made by Snap-on.
CAT 1/2" drive filter strap wrench. I'm not sure who makes this one, but it seems very nice. I have a strap wrench that uses just a square tube, (maybe it's a Lisle?) and it works okay, but I wanted one that would not dent the filter. I'll see how this one works out.
3/8" drive to 1/2" adapter and 1/4" drive Torx T10, T15, T20, & T25. All made by Snap-on.
6" #2 Phillips hard handle screwdriver. Made by Snap-on.
CAT 1/2" drive filter strap wrench. I'm not sure who makes this one, but it seems very nice. I have a strap wrench that uses just a square tube, (maybe it's a Lisle?) and it works okay, but I wanted one that would not dent the filter. I'll see how this one works out.
rshadd
Well-known member
Replaced my hogpod collection of plastic parts bins with three Akro-Mills 44 Drawers (10144).
before...
After. I ended up returning the large and small drawers and getting another 10144. Made in the USA.
before...
After. I ended up returning the large and small drawers and getting another 10144. Made in the USA.
Qualitytools
Well-known member
Where did you get those?Picked these up for the multi tool I just got. Made in Switzerland.
Snapped-off
Well-known member
Home Depot
Indexmill
Well-known member
I actually prefer the looks of the old setup.Replaced my hogpod collection of plastic parts bins with three Akro-Mills 44 Drawers (10144).
before...
After. I ended up returning the large and small drawers and getting another 10144. Made in the USA.
1foxracing
Well-known member
Received this week.
Kowa on top of Koken for size comparison.
Kowa on top of Koken for size comparison.
freudianfloyd
Well-known member
How do you use these? My multitool (Porter Cable) has a spring loaded lever you push down and slide the blades in from the side, you can't do that with these, or am I missing something?Picked these up for the multi tool I just got. Made in Switzerland.
Last edited:
Here are the green onesHey I got one too. Wish mine was green lol. We used to be able to get blue, black or red now they will only give us red ones. I asked for a new one from parts today and got it haha. I might have to buy myself one for a cool color.
Lang Tools brake caliper press
Snapped-off
Well-known member
This uses starlock which I believe the big brands are supporting. Mine also has a lever to attach and release. I'll take a pic of it.
You just flip the lever up and it releases the pin. Don't know if it's better than any older styles. I've never used one of these before.
Last edited:
freudianfloyd
Well-known member
I have the Bluepoint version of that tool. Works great, except I always seem to go the wrong direction first.
javyLSU
Well-known member
Would you mind measuring the length of the pads on that? I’m trying to figure out which of the Lang pad spreaders has the smaller pads, since I’ve already got the big Snap-on one. Thanks!
Got this set of Mayhew bearing race punches. Quality seems up there with the other Mayhew products I've been around, but the two largest punches are a little bent. I'm not sure if it will ultimately matter in any way, but its always kind of a bummer when you spring for the "nice" brand and there is a flaw.
Jaysreal
Well-known member
Just Traded up into snap on cordless from Milwaukee 
Video for those interested:
Video for those interested: