Show Your Williams

[3TV]

I just ordered this:

https://www.amazon.com/gp/product/B005VN5NEO/?tag=atomicindus08-20

and this:

https://www.amazon.com/gp/product/B001DO37QG/?tag=atomicindus08-20

Does that count?

 

[B_Lafayet]

I just ordered this:

https://www.amazon.com/gp/product/B005VN5NEO/?tag=atomicindus08-20

and this:

https://www.amazon.com/gp/product/B001DO37QG/?tag=atomicindus08-20

Does that count?

Shows delivery in 1 to 2 months. Bit of a wait.

 

[3TV]

When I ordered them last night the Amazon page said there was only 1 of each set left. I got an email this morning saying that both sets had shipped, and that expected delivery is next Thursday. So there better not be a two month wait for mine. But since I just depleted their stock, the next person along may have a two month wait.

 

[red94chev]

Not mine but I saw this at the Railroad Museum of PA in Strasburg over the weekend.

Sent from my Nexus 6P using Tapatalk

 

[3TV]

Ok, here's the pictures of the Williams USA sockets I ordered last week, ... and a couple of ratchets I got with them

 

[dice934]

I just joined as I was looking for info about these wrenches, I picked up some at a auction along with some other wenches and found this forum.

I will post pictures this week and if anyone is interested I am open to letting these go. As well as a list.

 

[BFBOB]

I'm baffled. Nine pages of Williams and not a single ribbed pattern!?

Is there some functional reason they are held in disfavor, or does everyone else just consider them ugly?

 

[dnschmidt]

I was never nuts about the SuperWrench as it had a fairly rough sandblasted finish and looked a little clunky. On the other hand the SuperRatchet is the BOMB. Got about ten of these in both normal B-52 and flex B-54 and they are killer. Best round head ratchet ever made. Lucky me I've also got a stash of replacement ratchet head kits along with the special spanner needed to remove the lock ring in both 3/8" and 1/2". I'll die with these ratchets that's how much I like them.

 

[WWheeler]

Last week picked up a Williams M-52EHFA 1/4" dr flex and swapped in a Snap-On RKRFC936 3/8" dr kit

We have a lot of Williams stuff at work, but this is my first Williams tool at home. Really liking it so far.

 

[dice934]

Here are the Vulcan wrenches I picked up as part of an auction lot. I picked up about 25 Snap on as well as 3 mac and about 45 others mostly Mastercraft all for $58

Any idea of total value of these wrenches and is it better to sell separate or as a lot.

 

[nine4gmc]

Nice wheeler!

 

[zktk01]

My Meager Williams collection
1/2 Breaker Bar
1/4 Breaker Bar
1/4 Super Ratchet (3/8 1/2 on the Way)
DOE wrench and Small service wrench
Williams AP12

 

[dice934]

I have this tool that I got in a large group of tools and It is a Vulcan Marked as CH-4

Any idea of its use. As well as possible worth.

 

[3baygarage]

Dice, that is a hone. Either an engine hone or brake cylinder hone, not sure. Probably engine, it looks a bit larger.

Nice stuff guys. Like the RR display.

Wheeler- neat picture.

 

[four.cycle]

^ engine cylinder honer. too big for a brake cylinder hone. looks like one of the stones is cracked.

 

[dice934]

All the stones are fine it is the triangle holder that makes it look cracked

 

[ducksface]

Maybe my stupidest tool purchase ever.
3/4" female drive ratchet.
20 bucks.
Do I win something?

 

[06switchback]

I bought 2 williams 1/4 drive ratchets a while back and I can't get a socket onto them easily I have to wiggle sockets on (off is no problem) the problem I am having is keeper on most ratchets is a ball on these it is a round pin with a square cut on the end that gets hung up on the sockets has anyone else had this problem?

I have a few other Williams tools I'll have to get some pictures and post them here

Sent from my SAMSUNG-SGH-I537 using Tapatalk

 

[65k10]

I bought 2 williams 1/4 drive ratchets a while back and I can't get a socket onto them easily I have to wiggle sockets on (off is no problem) the problem I am having is keeper on most ratchets is a ball on these it is a round pin with a square cut on the end that gets hung up on the sockets has anyone else had this problem?

I have a few other Williams tools I'll have to get some pictures and post them here

Sent from my SAMSUNG-SGH-I537 using Tapatalk

Are these ratchets tethered models? The Williams catalog mentions that the tethered ratchets have a locking pin that interfaces with a hole on tethered sockets.

 

[PelicanPines]

Maybe my stupidest tool purchase ever.
3/4" female drive ratchet.
20 bucks.
Do I win something?

Don't feel bad... if I coulda I woulda.

 

[06switchback]

Are these ratchets tethered models? The Williams catalog mentions that the tethered ratchets have a locking pin that interfaces with a hole on tethered sockets.

They have a hole with a split ring in the handle so they probably are tethered

Sent from my SAMSUNG-SGH-I537 using Tapatalk

 

[JDon99]

They have a hole with a split ring in the handle so they probably are tethered

Sent from my SAMSUNG-SGH-I537 using Tapatalk

That would be them. That line of tools has a "th" at the end of the part number.

 

[06switchback]

Is there a repair kit or parts available that would replace the pin with a regular ball?

If one could be changed to a 3/8 drive would be great since I am in need of a new short handle 3/8 anyway

Sent from my SAMSUNG-SGH-I537 using Tapatalk

 

[JDon99]

Is there a repair kit or parts available that would replace the pin with a regular ball?

If one could be changed to a 3/8 drive would be great since I am in need of a new short handle 3/8 anyway

Sent from my SAMSUNG-SGH-I537 using Tapatalk

As long as it's the usa made 1/4" drive ratchet, you can convert it over with a Snap On FC936 repair kit and cover plate.

 

[Rileysan]

I posted this in the DBE thread but it seems uncommon so I think it deserves a spot here.

Williams 7033 DBE: 7/8" x 31/32"

Brian







Sent from my LGL41C using Tapatalk

 

[mowkep]

I have some of my grandpas Williams spanner wrenches.

 

[EOC_Jason]

Got a set of combo wrenches I need to take pics of too...

 

[mowkep]

I also have a #5, 7/8 wrench. If I could post photos I would but it won't let me. Maybe I'm too new or just dumb or both

 

[jakemac]

Went on an eBay binge last weekend. The boxes showed up in the mailbox today.

—Williams— #1197 2-1/2" combo
Williams/Vulcan XOEM-14 14mm combo
Williams/Vulcan XOEM-17 17mm combo
Williams (TRW) #1735 DOE 1-1/8" - 1"
Williams (TRW) #1033A DOE 15/16" - 7/8"



Filling some holes in a few sets.
The picture is before cleanup. The wrenches are in better shape than they look right now.

 

[PharaohXJ]

Love my new B-52EHFLA

I have a question though the stamping on the ratchet

EHFB instead of A that is on the packaging

Any ideas?


Sent from my iPhone using Tapatalk

 

[Steven 33]

I have some koto tools. Cant seem to find info about them anywhere

 

[Steven 33]

Mm

 

[Steven 33]

I found one of those Koto superratchets today for $2.50. got it and an Artisan SK.

I have some koto tools. Can't seem to find info anywhere

 

[Steven 33]

Don't know how to delete

 

[RTM]

Don't know how to delete

You can't, but you could have edited any of them to keep them useful.

I think only admins can delete.

 

[Steven 33]

You can't, but you could have edited any of them to keep them useful.

I think only admins can delete.

Didn't have any pictures or anything yet. Working on that now so I can at least have something ha