To avoid these ads, REGISTER NOW!

Shower floor - adding "grit" ?

CheckeredFlag

Well-known member
Joined
Mar 28, 2013
Messages
988
Location
Mid Michigan
Sorry, this is a little O/T, but it's still kinda sorta a flooring question ...

so here goes:

My Mother in Law is getting -well- older .... and in her Master Bedroom, she has a 3/4 bathroom (sink / toilet / shower only)

She's concerned about slipping in there - I installed a grab bar which has helped, but was wondering --- I know on concrete garage floors, you can add a "non-slip" finish - is there a shower stall product like that ?

Was wondering if there is a coating I can rattle can spray or brush on that would help in this problem.

Was hoping to lightly sand and refinish to help out.

She's not interested in adding a in shower stall mat ....

It's an entire fiberglass enclosure.

thoughts ?

TIA
 
To avoid these ads, REGISTER NOW!

duneslider

Well-known member
Joined
Jan 20, 2013
Messages
2,267
Location
Riverton, Utah
My opinion is that the best way is using the anit-slip tapes or stickers designed for showers and tubs. I like stuff by 3m the best. They won't last forever but when they start to come up just put new ones down.
 
To avoid these ads, REGISTER NOW!
Top Bottom