side cabinet for tool box

[lightning02]

im looking for a side cabinet for tool-vault tool box.

it needs to be 20inchs deep and 34-1/2inches tall. blue in color.

before i buy one of the HF units and have it powder coated to match does anyone know of a company that makes one that will fit my chest?

 

[gdocktor3]

http://www.strictlytoolboxes.com/side-boxes.html

 

[lightning02]

I saw that one but $600 bucks? I rather just get the one from HF. I don't mind $300 from one that's blue but not $600. I don't need it that much lol

 

[gdocktor3]

$300 plus time and money to powder coat it blue.

 

[SIX225]

How about this one. http://www.menards.com/main/p-1444451679772-c-9188.htm?tid=4912337462166861096

 

[lightning02]

How about this one. http://www.menards.com/main/p-1444451679772-c-9188.htm?tid=4912337462166861096

I already have a locker. Looking for a cabinet.

 

[Mr_B]

http://www.menards.com/main/p-1444451668047.htm

If blue not same then HF best bet when on sale and strip it and paint it. I done one with epoxy matched at local paint supplier. Came oit nice but is lot of spraying when do all drawers etc but for cost saving worth it ...

 

[BDT/NWMN]

Have You thought about putting that money toward a larger roller, and sell the one You have now?

 

[cliftonbros89]

Just a heads up if you get the HF or Masterforce they won't be 20" deep

 

[Mr_B]

They 18" . don't know of 20" option, shame strictlytoolboxes don't do a drawer side cabinet for the toolvault range . HF side cabinet when on offer would be great solution at sensible final cost .

 

[VinceG]

look on craigslist or Ebay for a used Snap On, Matco, Mac,

 

[cliftonbros89]

I would think an extreme tools side cab would work no problem. All those boxes are basically the aame

 

[Mr_B]

^ no they not, extreme one is 25" depth, would be worth calling them though as if can't elp it might nudge them into adding a side drawer cabinet option .
I don't buy any range that doesn't have expansion units .

 

[lightning02]

http://www.menards.com/main/p-1444451668047.htm

If blue not same then HF best bet when on sale and strip it and paint it. I done one with epoxy matched at local paint supplier. Came oit nice but is lot of spraying when do all drawers etc but for cost saving worth it ...

that seems like the best choice so far. id just leave it the blue it comes. im sure its not the same but at least its blue lol

Have You thought about putting that money toward a larger roller, and sell the one You have now?

i have but i dont want to deal with the hassle. plus if i stepped up to the next one i want id have to shell out couple more Gs ontop of what i get for mine. so i rather just not go down that road lol

look on craigslist or Ebay for a used Snap On, Matco, Mac,

do those brands even make something in that size?

I would think an extreme tools side cab would work no problem. All those boxes are basically the aame

its still $600. i dont need it that bad. for $180-250 i dont mind but not $600

^ no they not, extreme one is 25" depth, would be worth calling them though as if can't elp it might nudge them into adding a side drawer cabinet option .
I don't buy any range that doesn't have expansion units .

i might drop them a line and see what they say. you would think they would by now. im sure alot of people would be interested in one. but it would have to be priced right.

 

[cspcrx]

Off topic a bit but how close is the red on these side boxes from menards to craftsman red? I was going to get a HF sidebox but the color is totally different.

 

[lightning02]

does anyone have one of the menards cabinets? wanted to know if it has the rolled edge that goes hooked over the side on the chest or does it just bolt on? hard to tell in pictures if it has the rolled edge on the sides.

 

[fatfillup]

look on craigslist or Ebay for a used Snap On, Matco, Mac,

You would have to be darn lucky to score a box like he wants off CL. They don't come up often. Not saying impossible though