Single Zone Radaint Heat Vendor

[2005UltraClassic]

Greetings from Minnesota.

I am the National Sales Manager for Radiant Made Simple, a single zone in-floor radiant heating system that is sold as a kit for the DIY individual.

We are an Alliance member. Please check us out by selecting Terra-Therm, Inc. in the listing of The Alliance.

With this I am introducing myself and testing my Avatar.

 

[anthony666]

your avatar doesn't work

 

[2005UltraClassic]

Thanks got that fixed.

 

[Highbeam]

How about a link?

 

[Highbeam]

http://www.radiantmadesimple.com/product.php

Here you go. 2000$ for a seisco boiler setup. Where's the air scrubber? Is it that little tiny bleeder device? Odd you use pex so close to the boiler, Is that 3/4" pex? Nice and compact setup though.

 

[2005UltraClassic]

Heater temperature at max (factory set) is 120 degrees F., well within the range that can be used with this material. PEX loops in concrete are 1/2" X 300'. Separate kit sold by the each. 300 Fool Loop Kit. Plan for 1 linear foot per square foot of concrete slab.

 

[2005UltraClassic]

The system air bleed is located above the flanged ball valve. To operate it, one opens the thumb screw at the top to relieve the air, if any, collected inside the valve. Then re-snug the thumb screw. A float inside the valve keeps the system fluid from leaving the system.

Visit our the complete listing of Alliance Vendors, look for Terra-Therm, Inc. and view our offer to the membership.