vette-kid
Well-known member
Spring cleaning sale!
Edit: list updated
Edit: 4 Apr, items added
Edit: 6 Apr, items added
Edit: 10 Apr, all ratchets sold!(traded...whatever, there gone)
Trying to clean out a bit and make room for stuff I "need".
First up, SK 3/8 12pt "set". Most of it is missing from the kit, but the speeder bar and the shallow sockets as well as a few deep wells. All SAE:
Shallow; 3/8-7/8 in 16ths
Deep; 1/2-13/16 in 16ths
Ill split this up. $20 shipped for the speed bar. $25 shipped for the sockets. Or all together for $40 shipped.
Rochester Q-Jet. This was on my 78 Vette, although i believe it may be off of a truck originally. Not real sure on that one. Works to the best of my knowledge. $60 shipped.
Next is a small lot of car stereo wiring; consisting of a GM 21 pin harness (only 14 are used...no Onstar version?), a set of GM speaker adapters (to connect aftermarket speaker to the factory harness), 4 sets of car speaker wire (I believe this is the wire that originally came with a JVC head unit, nice wire though would make good wire for color coding speakers on something else), a reverse signal wire (also from the same H/U), and a Monster cable RCA splitter (1 male to two female). Also not in the picture is a 90deg angle antenna adapter, also GM. If you need more wiring supplies, just let me know, I have stuff I can throw in with this lot to get your project going! Ill go $25 shipped on this. That a great deal!
Set of cheaper CH air tools. 3/8 ratchet and 1/2 impact. I bought these as a starter set, maybe someone on here would like a cheap set to start out as well. $35 shipped for the set. These would be $50 or $55 at wally world, so thats a pretty good deal. And I have only used them each about twice.
TRD boost gauge. This is the gauge that origionally came with the superchargers for the 3.4l 5VZFE engine. Works to the best of my knowledge, comes with wiring still attatched and a good lenght of vacuum hose attatched. It does have a few dings on the rim of it, nothing major. I would like $40 shipped.
I am willing to trade as well. Items I am interested in
Toptul, any sae sockets
Toptul, any ratchets
Toptul, satin finish metric deep well sockets
Any good file sets
good 3/8 dr air ratchet
C3 Li-Ion batteries/charger
C3 tools (sander or sprayer, but will consider others)
Long shot here...but a bench top drill press...variable speed
Thanks for looking!
Edit: list updated
Edit: 4 Apr, items added
Edit: 6 Apr, items added
Edit: 10 Apr, all ratchets sold!(traded...whatever, there gone)
Trying to clean out a bit and make room for stuff I "need".
First up, SK 3/8 12pt "set". Most of it is missing from the kit, but the speeder bar and the shallow sockets as well as a few deep wells. All SAE:
Shallow; 3/8-7/8 in 16ths
Deep; 1/2-13/16 in 16ths
Ill split this up. $20 shipped for the speed bar. $25 shipped for the sockets. Or all together for $40 shipped.
Rochester Q-Jet. This was on my 78 Vette, although i believe it may be off of a truck originally. Not real sure on that one. Works to the best of my knowledge. $60 shipped.
Next is a small lot of car stereo wiring; consisting of a GM 21 pin harness (only 14 are used...no Onstar version?), a set of GM speaker adapters (to connect aftermarket speaker to the factory harness), 4 sets of car speaker wire (I believe this is the wire that originally came with a JVC head unit, nice wire though would make good wire for color coding speakers on something else), a reverse signal wire (also from the same H/U), and a Monster cable RCA splitter (1 male to two female). Also not in the picture is a 90deg angle antenna adapter, also GM. If you need more wiring supplies, just let me know, I have stuff I can throw in with this lot to get your project going! Ill go $25 shipped on this. That a great deal!
Set of cheaper CH air tools. 3/8 ratchet and 1/2 impact. I bought these as a starter set, maybe someone on here would like a cheap set to start out as well. $35 shipped for the set. These would be $50 or $55 at wally world, so thats a pretty good deal. And I have only used them each about twice.
TRD boost gauge. This is the gauge that origionally came with the superchargers for the 3.4l 5VZFE engine. Works to the best of my knowledge, comes with wiring still attatched and a good lenght of vacuum hose attatched. It does have a few dings on the rim of it, nothing major. I would like $40 shipped.
I am willing to trade as well. Items I am interested in
Toptul, any sae sockets
Toptul, any ratchets
Toptul, satin finish metric deep well sockets
Any good file sets
good 3/8 dr air ratchet
C3 Li-Ion batteries/charger
C3 tools (sander or sprayer, but will consider others)
Long shot here...but a bench top drill press...variable speed
Thanks for looking!
Last edited:
