You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
SK ratchet repair
- Thread starter dawgn86
- Start date
thr3squared
Well-known member
Is the mode # of the ratchet 40970?
If so this should be it: https://www.toolsource.com/air-ratchet-c-273_502/ratchet-repair-kit-5-pcs-p-182434.html
If so this should be it: https://www.toolsource.com/air-ratchet-c-273_502/ratchet-repair-kit-5-pcs-p-182434.html
Get a magnet on a stick and see if you get lucky and find the piece first if nothing else is wrong with the ratchet. Kit will take a few days to arrive so it might be worth wasting 10 minutes first.
It's hard to tell without the rest of the parts there to see orientation but if that's the internal selector I'd imagine it's just a pin, springs and bearings would be in the actually pawl assembly. Could be wrong though, haven't disassembled a 1/4 beyond just pulling the head out for degunking and inspection.
It's hard to tell without the rest of the parts there to see orientation but if that's the internal selector I'd imagine it's just a pin, springs and bearings would be in the actually pawl assembly. Could be wrong though, haven't disassembled a 1/4 beyond just pulling the head out for degunking and inspection.
dnschmidt
Well-known member
S-K will not have something to sell until September and people wonder why S-K *****, has always sucked and will continue to **** no matter who owns them which by the way changes every 5-10 years or so. Hell, it only took them two years to finally come out with the X-frame non-reversible ratcheting wrenches. Four months for a rebuild kit. Consider yourself lucky.
Looked at the kits and found the piece in orientation. Was thinking it might've been a set pin to keep the assembly together but you're talking about the pawl assembly pin and spring for sure. Did notice the spring is preinstalled on the kits so it might be seated well so I'd check the hole and confirm whether it shot off or is just recessed.The rebuild kit shows as spring in the internal selector with a pin. SK won't have parts until September.
Will try the magnet trick and look on ebay.
thr3squared
Well-known member
Woops, sorry I didn't catch that. Have you tried eBay?It is a 40970. I found that site but this kit has been discontinued.
sparky 1971
Well-known member
Here's one.
You could also get the drop in 120 tooth upgrade kit. I have one in mine and like it, but I wouldn't pay $30+ for it. I think mine was about $15 when I bought it from Circle C when they carried SK back in the day three years ago.
You could also get the drop in 120 tooth upgrade kit. I have one in mine and like it, but I wouldn't pay $30+ for it. I think mine was about $15 when I bought it from Circle C when they carried SK back in the day three years ago.
Last edited:
vssjim
ALLIANCE MEMBER
I have plenty just need an address, send me a message
Sent. Thank youI have plenty just need an address, send me a message