SKF E2 Energy Efficient bearings

[pcmeiners]

Finally found a US supplier of SKF E2 Energy Efficient bearings. Have used these on several motors, they use less current, run cooler, and produce less vibration then standard bearing, 30% more efficient. Until recently I needed to procure them from the UK at higher prices and high shipping cost. They do cost more than standard bearing even in the USA but they are worth the difference for well used motors.

SKF USA

Unmatched quality and market coverage. The SKF vehicle aftermarket boasts a product range of over 20 000 variations in unmatched quality. We focus on providing system repair products with a wide range coverage so that you don't have to look very far for the parts you need. Through a strong...

www.amazon.com

 

[Garcky]

My error. You have to click the red SKF USA VA at the top of the box to go where you indicate.

 

[bwringer]

Nice! Seems to be working for me.

Are they all ZZ (metal shield) bearings? 2RS (2 rubber seals) would be useful. I see one pictured, but it's not clear it's 2RS in the part number.

 

[pcmeiners]

SKF brochure.....

https://www.skf.com/binaries/pub12/Images/0901d196802f1756-SKF-Energy-Efficient-(E2)-deep-groove-ball-bearings-for-bulk-conveyors-leaflet_tcm_12-150020.pdf

As to the seals, I believe all the bearing I have used have metal shields, as there is more friction with the rubber seals. If your worried about bearing contamination, check out their use in the link above.