slippery floor ????

[oiler]

Sorry i haven't got any pics but I'll try to get some up this weekend
I built my 40x32 this fall and am wondering what to do with the floor
After it was poured the concrete guy had to leave so he asked me to seal it for him
The floor was pretty smooth but after I put the sealer on it's downright deadly when you've got a little snow on your shoes
It was a gray type of sealer that I sprayed on with a hand sprayer (weed sprayer)
He aslo said it was also a type of hardener
Although it coated well and seems to be tough I have to change it
It's almost impossible to stop a car on it when you drive in
Any ideas would be muchly appreciated
jeff

 

[stok2]

Mine is the same way, it's slippery as sh*t. I put two parking mats where I park the cars, it helps some. As soon as the weather gets better I'm going to put down VCT and use that non-slip wax. Hopefully that will help, I just need to make sure the wife kicks the snow off in the winter so the floors don't stay wet.......

 

[Tech Guy]

What about putting down another coat of sealer but adding some silica sand to it so it adds grit ?

 

[AlphaGarage]

What about putting down another coat of sealer but adding some silica sand to it so it adds grit ?

Most sealers are very thin, I don't think that the can hold onto grit additives.