Small Torx Screwdrivers

[theoldwizard1]

I'm looking for a modestly priced set of small (< T5) screwdrivers. I have hex bits, but screws are recessed in a hole that is too small for the driver/handle.


EDIT: Or maybe just a set of extra long bits ?

 

[wagzilla]

I have one thats has a small rachet that works in tight places it was on line pretty cheap had about 36 peaces. forgot the name sorry

James

 

[CWP1616L]

Wiha or Moody.

 

[theoldwizard1]

Wiha or Moody.

Neither are "modestly" priced !

 

[TwoInch]

i have and use the Western Forge made craftsman set, and have no complaints. its affordable too. i think i paid like $8 bucks on sale a while back, when rebuilding a 1/4" snap on ratchet.

 

[Alchymist]

http://www.garagejournal.com/forum/showthread.php?t=184715

 

[cburnscrx]

Menards has a set, Masterforce and USA made to boot.

http://www.menards.com/main/tools-h...torx-reg-screwdriver-set/p-1502759-c-9158.htm

 

[plinker]

Menards has a set, Masterforce and USA made to boot.

http://www.menards.com/main/tools-h...torx-reg-screwdriver-set/p-1502759-c-9158.htm

I have this set, no complaints for how much I've used them (which isnt much, but I had them).

 

[knobby]

try KBC tools seeing your location they should be local to you

 

[ndoran]

i got mine from NAPA

 

[hell_fish_65]

I was looking at the Fuller set today http://www.amazon.com/gp/product/B000BDDGTI/?tag=atomicindus08-20

Felo has this set for under $30 http://www.amazon.com/gp/product/B000BDDGTI/?tag=atomicindus08-20

Havent used either, so I can't say how good they are. Just window shopping.

 

[bwringer]

Ace Hardware sells a very nice set -- around $15, with a zipper case. I've used mine a lot at work on computer bits and cell phones.

Sears sells a decent set, and individual drivers in most sizes if you know what you need.

 

[knobby]

http://www.bondhus.com/bondhus_products/tool_categories/wings_flags/index.html

 

[cosmik binturong]

http://www.bondhus.com/bondhus_products/tool_categories/wings_flags/index.html

you do know that "<" means "less than", don't you?

so, posting a link to a Bondhus' page where there's no smaller than T5 Torx is not really helpful...

educamation these days...



now, as for those small Torx screwdrivers, there's not that much choice -quality wise- *if* it's to be of regular use on steel or Ti screws and/or if there's a need to re-use those screws: PB Swiss, Wiha, Wera, Vessel and Moody are probably the top five for T1 to T5 bits/screwdrivers for serious use, be that professional or not. if budget is tight and use infrequent, get a good set of good taiwanese ones sold under many brands.

 

[Nick Danger]

Menards has a set, Masterforce and USA made to boot.

http://www.menards.com/main/tools-h...torx-reg-screwdriver-set/p-1502759-c-9158.htm

I can't tell what size those are.

 

[theoldwizard1]

I bit the bullet and bought Wiha, T2, T3, T4, T5 and T10. Very nice !!

 

[jeffmoss26]

I love the Picquic teeny turner, use it for working on laptops. I also have a set of Apex bits T6 and up that I use with my ratcheting drivers.

 

[basspro]

I have the masterforce set and it is nice!

 

[cosmik binturong]

Menards has a set, Masterforce and USA made to boot.

http://www.menards.com/main/tools-h...torx-reg-screwdriver-set/p-1502759-c-9158.htm

I have this set, no complaints for how much I've used them (which isnt much, but I had them).

I have the masterforce set and it is nice!

three that have this set and not even one has the idea to post what Torx sizes are in this set?

 

[cosmik binturong]

I bit the bullet and bought Wiha, T2, T3, T4, T5 and T10. Very nice !!

good choice!

 

[mech-tech]

I got mine at lowes for $8. It is the kobalt brand and has a bunch of long bits stored in the handle that goes from t-10 on down

 

[ChevyEFI]

three that have this set and not even one has the idea to post what Torx sizes are in this set?

I don't know what my micro torx driver sizes are either.

They look like the ones in these sets and I always have one that fits.

There are times to micromanage your inventory and then there is time to arrêter de déconner et de travailler.

 

[cosmik binturong]

I don't know what my micro torx driver sizes are either.

can't read the size on 'em? get better eyes!

They look like the ones in these sets and I always have one that fits.

lucky guy...

There are times to micromanage your inventory and then there is time to arrêter de déconner et de travailler.

if i do micromanage my screwdriver herd, i do micromanage it with all the precision needed...

no time to work though, i prefer to play.