heydude348
Member
- Joined
- Sep 11, 2022
- Messages
- 9
Bout a SO Intimidator box.Guides are badly gummed up.SO won’t replace guides because Im not original owner.No biggie.
I removed the guides on the top box left side no problems.No hidden tabs requiring a SO tool with hammer.Just 1/4” sheet metal screws.
Problem is , there are a few guides on the top box right side, the upper drawers, that don’t have the large access hole like the left side had.
So before I start “ increasing “ the size of the access hole with a Dremel, is there something Im missing to remove thee 1/4” sheet metal screws.I’ll try and upload a pic.
Finally what’s the best lube to use?
Thanks for your time
I removed the guides on the top box left side no problems.No hidden tabs requiring a SO tool with hammer.Just 1/4” sheet metal screws.
Problem is , there are a few guides on the top box right side, the upper drawers, that don’t have the large access hole like the left side had.
So before I start “ increasing “ the size of the access hole with a Dremel, is there something Im missing to remove thee 1/4” sheet metal screws.I’ll try and upload a pic.
Finally what’s the best lube to use?
Thanks for your time
