snap-on F723 3/8 ratchet

[lightning02]

Im trying to restore this snap-on f723 but I need a new gear and one screw that goes in from the back side and holds the front plate.

Anyone know where I can get these parts?

Also what year was this ratchet made?

 

[CWP1616L]

It's looking like they got your screws but not the pawl or the gear. Incidentally, if you do find a gear, make sure you get the matching pawl. On those older ratchets, Snap-on upgraded from a 20 tooth to a 30 tooth service kit and the gears and pawls have to match. Check eBay for NOS service kits.

The date code should be right by the lever between OFF and ON.

F723 PARTS LINK

F723A PARTS LINK

 

[lightning02]

Yea i saw snap on had some parts but no gear.

There is no date under the on/off

 

[CWP1616L]

Look for the date code on the handle in between the grooves. They put it there sometimes. You might have to get the whole ratchet replaced if there's no more parts for it.

 

[snapmom]

You can call them and they will send you a free kit. or you can but it for 10.00
http://buy1.snapon.com/catalog/searchLN.asp?partno=rkraf723&searchTrnsfr=true&search_type=Part&store=snapon-store

 

[CWP1616L]

Order the special service tool while you're at it; you'll be glad you did.

http://buy1.snapon.com/catalog/sear...nsfr=true&search_type=Part&store=snapon-store

 

[wrenchr]

I have an extra gear. PM me and it is yours. As long as you are in the lower 48 that is.

 

[lightning02]

Look for the date code on the handle in between the grooves. They put it there sometimes. You might have to get the whole ratchet replaced if there's no more parts for it.

other then F723 the only other info on the handle is "PAT. NO. 3713356"

thats all....

You can call them and they will send you a free kit. or you can but it for 10.00
http://buy1.snapon.com/catalog/searchLN.asp?partno=rkraf723&searchTrnsfr=true&search_type=Part&store=snapon-store

if thats a whole kit referring to the links above i dont need it. just a gear and one screw.

Order the special service tool while you're at it; you'll be glad you did.

http://buy1.snapon.com/catalog/sear...nsfr=true&search_type=Part&store=snapon-store

what is this tool? pic maybe?

I have an extra gear. PM me and it is yours. As long as you are in the lower 48 that is.

yes i am. is the gear new?

 

[lightning02]

after looking little more info it i could use a new pawl for it to be perfect. the problem is im not sure how the old one comes out

 

[tjmonsen5]

I just rebuilt one of these last month. The rebuild kit has new screws, seals, gear, pawl, and updated spring and ball.

 

[lightning02]

I just rebuilt one of these last month. The rebuild kit has new screws, seals, gear, pawl, and updated spring and ball.

my is stamped with the letter "E" on it. does that mean anything? does the kit work for all F723 models?

how do you take the pawl out if you dont mind me asking?

 

[tjmonsen5]

my is stamped with the letter "E" on it. does that mean anything? does the kit work for all F723 models?

how do you take the pawl out if you dont mind me asking?

You need to use a punch. The repair kit will include a new reverse lever and pawl. It's pretty much one time use.

 

[lightning02]

You need to use a punch. The repair kit will include a new reverse lever and pawl. It's pretty much one time use.

ok thanks

and the kit listed above is the one for the ratchet i have?

 

[tjmonsen5]

I don't remember the kit number sorry. Call snapon tomorrow they will take care of you.

 

[tjmonsen5]

I think mine was rkraf730 actually, upgraded to 30 teeth.

 

[lightning02]

mines the fast release head.

is the rkraf730 the same thing?

 

[tjmonsen5]

Yea mine is quick release too. Same thing I think. But calling snapon would confirm it.

 

[wrenchr]

other then F723 the only other info on the handle is "PAT. NO. 3713356"

thats all....



if thats a whole kit referring to the links above i dont need it. just a gear and one screw.



what is this tool? pic maybe?



yes i am. is the gear new?

Some of these are 20 tooth while others are 30. Not sure which ones I have but I should have both. As far as new goes it would be new to you

 

[wrenchr]

Oh it is quick release, I might still have a gear, let me look.

 

[lightning02]

they dont have any special service tool in stock. anyone know how long it takes for them to restock?

 

[tjmonsen5]

I found my paper from my rebuild kit, my F723 ratchet used the RKRAF723 rebuild kit. Pretty sure it has 30 teeth in it now too. Thats the kit you need.

 

[lightning02]

I found my paper from my rebuild kit, my F723 ratchet used the RKRAF723 rebuild kit. Pretty sure it has 30 teeth in it now too. Thats the kit you need.

Thank you sir. ***** there out of stock on the tool. Guess I just order the kit.

 

[tjmonsen5]

i bet they can get the tool from a different warehouse if you call...

 

[SuzukiGS750EZ]

The tool makes the job easier, but be used a pocket screwdriver to repair ratchets with the BB as well. Just throw a dab of grease on the driver tip and stick the ball, it's thin enough to slide out after you have the pawl and gear in. That tool makes your life tons easier though.

 

[CWP1616L]

The tool saves you from a ton of frustration. It's worth 10 times the listed price for me so I bought 10 of them.

 

[lightning02]

yea i want to buy it, there just out of stock, i guess i can try and call and see what they say about it.

 

[lightning02]

i ordered the rebuild kit and tool

what oil or lubrication are you guys using when installing the new parts??

 

[Freeborn John]

You can call them and they will send you a free kit. or you can buy it for 10.00
http://buy1.snapon.com/catalog/searchLN.asp?partno=rkraf723&searchTrnsfr=true&search_type=Part&store=snapon-store

Why not order it from Snap-on UK?
That will be $54 to you Sir.
Postage and packing extra, naturally...

 

[Canadian Cowboy]

my is stamped with the letter "E" on it. does that mean anything? does the kit work for all F723 models?

how do you take the pawl out if you dont mind me asking?

If the E is stamped on the handle portion of the ratchet than that was a exchange ratchet.
Years ago Snap-On had a ratchet exchange program.

CC

 

[lightning02]

If the E is stamped on the handle portion of the ratchet than that was a exchange ratchet.
Years ago Snap-On had a ratchet exchange program.

CC

oh ok. this was my father ratchet from years ago. i guess that explains why.

 

[CWP1616L]

what oil or lubrication are you guys using when installing the new parts??

Superlube 21030. You can get it at Harbor Freight.

 

[tjmonsen5]

lube comes with the repair kit, no need to go out and buy extra... unless you want to lube your other ratchets as well.

 

[lightning02]

Good to know that. Thanks.

 

[4x4gearhead]

the kit should come with a tube of lube. I know all my others have, even one for an F-70-m.