Snap on for sale

[bluebolt]

Location

Benton LA

Price

Varies

All tools are used unless otherwise noted and have small nicks, wear spots and other small defects unless otherwise noted. Owners marks may or may not be present unless otherwise noted.

All the logos are the old underlined style unless noted

I do ask that you buy at least $10 of tools.

Shipping not included.

If you can pick up and pay cash discount will be given!

If you buy several lots/pieces discounts will be considered!

I can do either Paypal or money order, other methods of payment please ask.


[Ratcheting SAE wrenches 3/4-13/16 R2426, 5/8-11/16 R2022, 1/2-9/16 R1618 and 3/8-7/16 R1214A $25 no owners marks noted.


7/8 Bluepoint vintage no owners marks noted $6
5/8 3/4 TUBULAR WRENCH (have 2) XDH2024 $4 EACH 1 sold, 1 available
15/16 1 Bluepoint X3032 1" end cut off $2
3/8 7/16 flare wrench RXH1214S crusty $3

Screwdrivers and nutdrivers ALL SCREWDRIVERS Sold except the 040

040 flat blade angle screwdriver nice shape No owners marks noted $3 Sale Pending #3

SSDMR4A Ratcheting bit holder no cap works fine No owners marks noted $10 SOLD


BLUE POINT ADJUSTABLE PLIERS HL112P $8

Impact sockets, note some of these have surface corrosion typical of black oxide industrial tools.
13/16 IM260, 5/8 IM200, 15MM IMM150 $3 EACH
7 PC 1/2D DEEP SAE SET 1", 15/16", 7/8", 13/16", 3/4", 11/16", 5/8" SIM320-SIM200 $40. No owners marks noted.
8 PC 1/2D SHALLOW SAE SET 7/8, 13/16, 3/4, 11/16, 5/8, (9/16 missing) 1/2, 7/16, 3/8 IM280-IM120. $32 No owners marks noted
5 pc 3/8D SHALLOW SAE SET 3/4, 11/16, 5/8, (no 9/16 or 1/2) 7/16, 3/8 IMF240-IMF120 $15 No owners marks noted

 

[bluebolt]

3/8 drive
5/8 deep 6 pt SFS201 $2,
7/16 deep 6 pt SFS141 (2 each), new logo $3, SALE PENDING
old logo $2, SOLD5/16 deep 6 pt industrial finish (non impact) $1, Sale Pending




Swivel set 7/16 FVU14 (not guaranteed), 1/2 FU16A, 9/16 FU18A, 5/8 FU20A, 11/16 FVU22 (not guaranteed, has owners markings JTC) 3/4 FVU24 (not guaranteed) 7/8 FVU28 (not guaranteed) $20
Loose swivels 7/16 FU14A little loose $3, 7/16 FU14A Chrome flaking $3, 1/2 FU16A $4, 11/16 FU22A little rusty $3, 9/16 swivel 6 pt FSU18 (swivel a little loose) $2
All 12 swivel SAE sockets $30 Sale Pending

14mm deep 6 pt SFSM14 $2,Sale Pending

7 pc deep set SAE SFS281-SFS081 7/8, 13/16, 3/4, 11/16 (really crusty!), 5/8, 7/16, 1/4 $20 no owners marks noted Sale Pending

8 pc shallow set SAE F261-F141 13/16, 3/4, 11/16, 5/8, 9/16 (new logo), 7/16, FV101 5/16 (not guaranteed) F080 1/4 "G" code 1945 $15 Sale Pending


Extensions, Universal and "T" sliding driver
FX1 shorty ball checks good No owners marks noted $3
FX4 decent shape ball checks good No owners marks noted $4
F6 Ferret vintage 40's? ball checks good some chrome loss $3
FX11 decent shape ball checks good No owners marks noted $4
FX24 bottom half really rusty ball checks good $5
Or $15 for all 5. SOLD
FU80A universal good condition ball checks good No owners marks noted $7 SOLD

Allen hex 3/8" FA12A (owners marks) and 1/4" FA8A and 1/4 flat tip F42 $6 for all three Sale Pending


1/2 drive
Flex ratchet S711A chrome loss in a few spots ratchets decent could use a lube No owners marks noted $35 SOLD
Flex ratchet S711A (can't read to to be sure) rusty drive square spins free, shift lever frozen, $17 as is. SALE PENDING
Extension 15" SX15 looks decent ball checks good No owners marks noted $10 SOLD

7/8 6 pt deep TS281 $3,Sale Pending
5/8 12 pt deep S201 $2,
1-NAF-1110-13 spark plug socket US Navy owners marks $1 Sale Pending

Other tools

Blue Point PR37 and PR38 internal and external snap ring pliers, the PR38 is missing one jaw pin holder and screw $8 for both
No. 96 vintage Vacuum Grip needle nose, pitted, 1957 date code, $5
4 pc screw extractor set SR-20, SR-14, SR-10, SR-4 $10 Sale Pending


Fine thread SAE re-threaders TRF-7A no cover for case $10 Sale Pending

Metric allen hex wrenches with plastic pouch 12, 10, 9, 8, 7, 6, 5, 4, 3, (All marked Snap On) 2.5 (not marked but same gold color, probably too small to be marked) $15 owners marks, some light corrosion)
T15 1/4"D Torx bit TTX15A $2

BLUE POINT ADJUSTABLE PLIERS HL112P $8

Impact sockets, note some of these have surface corrosion typical of black oxide industrial tools.
13/16 IM260, 5/8 IM200, 15MM IMM150 $3 EACH
7 PC 1/2D DEEP SAE SET 1", 15/16", 7/8", 13/16", 3/4", 11/16", 5/8" SIM320-SIM200 $40. No owners marks noted.
8 PC 1/2D SHALLOW SAE SET 7/8, 13/16, 3/4, 11/16, 5/8, (9/16 missing) 1/2, 7/16, 3/8 IM280-IM120. $32 No owners marks noted
5 pc 3/8D SHALLOW SAE SET 3/4, 11/16, 5/8, (no 9/16 or 1/2) 7/16, 3/8 IMF240-IMF120 $15 No owners marks noted

.

 

[bluebolt]

Adding some more Snap On. The first post above is also still correct, the second one I am working on.

Sockets and accessories
1/4" drive
Metric sockets, like new, 6 point, TMM series. 4, 5, 5.5, 6,7,8 $12 SOLD
1/8" Allen socket, TMA-4, old underlined logo $2 Sale Pending

3/8 drive
6 point sockets
13/16 FS261, nice shape, $4 Sale pending
5/8 FS201, some rust pits, $2
12 point
13/16, F261 old underlined logo, rusty, $1
5/8, F201 nice, $3 Sale pending
9/16, F181, old underlined logo, rusty, $1
3/8, F121, nice $3 Sale pending
3/8, F121, old underlined logo, rusty, $1
Allen sockets FA series, mix of old and new logo. 5/16, 1/4, 5/32 x 2 each, 9/64, 1/8. Range from nice to decent condition, $12 for all 6 SALE PENDING

1/2" drive
1 1/8 deep impact socket SIM360, old logo, good shape, $6
1 1/8 6 point socket TW361, some hammer marks on top, otherwise nice, $5
3/4 impact socket IMDL240, socket end ground down for better contact? $1
5/8 12 pt socket, SW201, light wear, $3
Extension 3" SXK3, good shape, knurled grip $6
Extension 10" SX10, mild abuse, $5

Wrenches
Angle wrench 4 way, 3/4" VS24, old underlined log, owners marks, wear. $6 SALE PENDING C#4


Combo wrench 3/8 OES12, old underlined logo, light wear, owners marks, $5 Sold


Flex head socket / open end Saltus 9 piece wrench set FHO series Sold
1/4 loose flex joint
5/16 has a worn socket end and needs to be warrantied
3/8
7/16
1/2
9/16 is a MAC replacement, CFBX218R
5/8
11/16 is a old underlined logo and has a little more wear than the others
7/8
All have light wear around the tips of the open ends and contact marks from the swivel socket to the beam. The 7 largest sizes 3/8 to 3/4 are what comes in the FHO607B set.
$100 for all 9 wrenches.

Drivers and pliers

Red screwdrivers 3 piece setSDD2 flat blade, SDD4 flat blade, SDDP42 #2 phllips. All blade tips look good. The handles are scuffed and dull, the SDD4 has what look like a small melt spot. $12 for all 3 SALE PENDING

Black flat tip 3 sided handle, number is worn off but it has the same blade as the red SDD4. The blade tip is worn and ground down. $2

Nutdriver red 1/4" NDD108AR good shape $8
Nutdriver black 5 mm NDDM50 good shape $7

Blue Point PR-37 internal and PR-38 external snap ring pliers with plenty of tips. With the KRA-229 case $30, without $12. SALE PENDING

IMPORTANT PLEASE GIVE AN EXACT LIST OF WHAT YOU WANT SINCE I HAVE SEVERAL POSTS

 

[bluebolt]

More for sale!

AWMEF8K Metric hex key, AWEF9K SAE and AWTEF8K folding wrench set, blade are a little rusty but tips look good $30 for all 3

F-70N Ferret 3/8 ratchet, "E" date code, rusty area on end of handle. $10

RXS18 9/16" flare / open end wrench new logo nice shape $10
RXS14 7/16" flare / open end wrench new logo nice shape $8 also 1 old logo not pictured some wear $7
RXS12 3/8" flare / open end wrench old logo good shape $6

SSDZ42 #2 Pozidriv screwdriver tip looks good, red plastic handle a bit faded in color $3 SALE PENDING #3

040 screwdriver double ended flat blade good shape old logo $2

TM84 recessed flat blade screwdriver 1/4"D bit $3
F-14 7/16" swivel socket 12 pt date code appears to be 1942 swivel has a good feel to it, mottled non-chrome finish, $3
FU8A 3/8"D swivel new logo nice condition $8
FP-32A #2 Phillip's bit holder socket, the bit is missing! $1 SALE PENDING
F-2 3/8"D extension, lots of Chrome loss, date code looks like 1941. $2 SALE PENDING



Bluepoint

CW12 chain wrench good shape $15

BP8A ball peen hammer 8 oz. Handle has some slight damage near the hammer head. Good shape $10

PR-27 and PR-34A snap ring convertible pliers good tips $20 for both

PIT-12 Impact driver 3/8 good physical shape but I have not tried it out, $5. Sold

 

[bluebolt]

More Snap On!
Pic 1
Prybar 18" long 2050 has wear $15
Dzus fastener screwdriver S6180 tip is a little corroded but looks good otherwise. $15
3/8D ratchet adapter, does not work although direction slide does move. $6
1/4D stuff
deep sockets
STM 6 3/16, STM7 7/32 6 PT $4 each, MVS14 7/16 12 PT $3
shallow
6 pt TM6 3/16 $3, MVS8 1/4 $2, 8 pt TM412 3/8 $2, 12 pt TMD6 3/16 $3, TMD7 7/32 light corrosion $2, TMD 11 11/32 light corrosion $2, TMD14 7/16 ground shorter $1.
TM628 flexible driver light corrosion $10
TML70B long handle ratchet, needs a rebuild kit, $20. SOLD
TMXK4 knurled extension $5
TMC04A flat tip screwdriver nit nice shape $5
1/4D female to 3/8 male adapters, 3 each MVA3 $5 each, 1 each TA8 $6
Flex extensions MVU8 $5, TMU8 $6

Pic 2 some unusual stuff.
S6109 Dana 70 axle socket $20 Sold
ANS7269 Blue Point 1985 up Ford Floating rear axle socket $30
S8684B John Deere and Oliver 13/16" head torque wrench adapter $20
B4203 Case and Minneapolis 15/16" head torque wrench adapter $20

B4402 distributer and starter wrench 9/16" $20
M1322 Cummins valve adjusting wrench 3/4" $20
M1318 Cummins valve adjusting wrench 3/4" $20
B4403 John Deere injector pump wrench 9/16" $35
S8190A Diesel Injector Wrench 9/16" moderate corrosion $20

Pic 3 CJ282B Combination puller set, complete. I put this puller set together with the best pieces I had. Some corrosion on few of the pieces. The 2 bolts are grade 8 and are likely the originals. The tray has a few cracks and there is no box. $140 SOLD

Pic 4, this is the same puller as above. It does not have the small removable tip, the 2 bolts, the 4 adapter discs and one of the short jaws has a chip out of the jaw. It obviously has more corrosion that the one above. $70. Sold

Also in this pic is a CJ98 puller plate for harmonic balancers and steering wheels and other uses. This takes the same draw screws as the previous two pullers. $15 Sold

Pic 5

Vacuum grip pliers #47, chrome loss, RF owners marks, $7
Vacuum grip pliers #85 small dykes, date code 1968?, jaws look decent $6
Vacuum grip pliers #87 large dykes, jaws look decent, $6
VS18B 4 way angle wrench, nice shape, new logo, $15
VS24 4 way angle wrench, good shape, old logo, $15
SSS306 flat tip screw drivers, one looks like new $4, the other has a smidge of the tip broken off which I could only tell by comparing the two, $3. 1 with smidge of tip gone is till available, other was used for GJSS SALE PENDING #3

C47B screw extractor set, set has 1 SR4A bits, 2 SR10A bits and 1 SR14 bits, $12 SOLD

 

[bluebolt]

UPDATED 20 Sept 2018

Long overdue bump, some of this has been sold and I will be adding a lot more.

Pic 1 and 2: 1/4 drive

TM5 sliding T handle $6
TM61 flex shaft, not guaranteed, not chrome plated, date code appears to be 1947 $10
TMXK4 knurled extension $5 SALE PENDING #3

TMX2 extension, old log, owners marks, $2
1/4D female to 3/8 male adapters, 3 each MVA3 $5 each, 1 each TA8 $6
Universals MVU8 $5, SALE PENDING $3
TMU8 $6 SALE PENDING

TM737 Roto ratchet $25 SALE PENDING
MV71 Ratchet, no owners markings, nice chrome $20 SALE PENDING C#7
GM70RG Ratchet, industrial finish, $15 SALE PENDING C$6

TM70B Ratchet, chrome loss, needs lube or a kit, $12 SALE PENDING C#5


GM70M Ratchet, needs lube or a kit, $12 SALE PENDING #3

TM830 Ratchet, broken lever, rusty, mechanism frozen, $6 SALE PENDING
TM628 flexible driver, light corrosion $10

Pic 3: 1/4" sockets.
Upper left 6 point sockets
Deep: STM 6 3/16, SALE PENDING C#4

STM7 7/32 New Logo $4 each, SALE PENDING C#4

Shallow: 6 pt TM6 3/16 $3, MSV6 3/16" $2, TM8 1/4" New Logo $3, SALE PENDING C#4


MVS8 1/4 $2, TMUS121 faint owners marks $4

Lower left
TMC04A flat tip screwdriver bit nice shape new logo $6 SALE PENDING C#4


Torx bits TTX25B T25 and TTX15A T15 $4 each

Lower center
Magnetic sockets MGM10C 5/16" SALE PENDING C#4

and MGM120C 3/8" SALE PENDING C#4

$4 each

Lower right 12 point sockets
Deep STMD7 7/32" $4 MVS14 7/16" $2

Shallow
TMD6 3/16 $3, TMD7 7/32 light corrosion $2, TMD 11 11/32 light corrosion $2, MV14 owners marks $2 TMD14 7/16 ground shorter $1.


Added, no picture. TMMD8 short 8 mm 12 point socket $3.

Pic 4 and 5: Weatherhead fitting 3/8" drive socket set, this all 11 pieces in the set FD250, 240, 220, 210, 190, 180, 170, 160, 15, 140, 120. Date code looks like 1985. No owners marks. A few light scuffs from use. $80 SALE PENDING

Pic 6 and 7: 3/8" Drive ratchets, handles and extensions.

FV4 speed handle, decent shape, $6
F712 flex bent handle ratchet. decent shape, ratchets stiffly, needs a lube or kit. $25 SALE PENDING #3

F5C Ferret Sliding T Handle, decent shape, $8
F936 ratchet, some rust and slight chrome loss, ratchets stiffly, needs lube or a kit. $16 SALE PENDING C#5


F710D ratchet, rusty and chrome loss, shift lever stuck, freewheels, $6 B]SALE PENDING C$6[/B]


F70N Ferret ratchet, E date code. Industrial wartime finish. Handle is rusty and pitted on very end. Ratchets stiffly, needs a lube. $10 SALE PENDING C#7

F70N Ferret ratchet, 1940 date code I think. Corrosion and chrome loss. Ratchets stiffly, needs a lube. $8 SALE PENDING C#7

F1046 flex handle. Nor sure about the 46, might be faint letters. G date code, wartime industrial finish. Handle end has the female opening to use as an extension, it has small cracks form 2 of the corners. $5 SALE PENDING C#7

FX6 extension, good shape. $5

 

[bluebolt]

EDIT Wednesday 26 sept 10 PM
I'm still trying to add more items and get things updated. Please be patient.



Pic 1: 3/8" drive extensions and adapters starting from top left.

FX6 extension, good shape. $5 Sale Pending C#5

FX6 extension, chrome loss and rusty, $2 Sale Pending C#6
F2 extension, chrome loss and rusty. $2 Sale Pending C#6

FX2 extension, chrome loss. $3 Sale Pending C#6

FX1 extension, rusty. $3 Sale Pending C#6

FU8A flex extension, chrome loss, works decent, $4 Sale Pending C#6


from upper right
F67B 3/8D ratchet adapter, does not work although direction slide does move. $6 Sale Pending C#5

FXK6 knurled extension, new logo, some usage marks, $5Sale Pending C#5

FXK3 knurled extension, new logo, decent shape, $5Sale Pending C#5

A2 3/8F to 1/2M adapter, new logo, slight rust and chrome loss, $4 Sale Pending C#5

FVA1 3/8F to 1/4M adapter, chrome loss, not guaranteed, $2 Sale Pending C#5



Pic 2 and 3: Blue Point snap ring pliers, 10 pieces, $60 for all. A few have owners marks, the PR38 is missing 1 of the tip holders and screw and you would have to use one from the PR37. I don't have any extra tips for the PR37 and PR38.


Pic 4: From top left

HL112P Blue Point water pump pliers, has paint on them and worn red grips, $8
Vacuum Grip pliers #87 large dykes, jaws look decent, $5
HL9CP high leverage pliers, nice shape, jaws look barely used, $30
HL9CP high leverage pliers, a lot more use than above, jaws have nicks and wear, $10

Top right
YA824B Blue Point spark plug wire pliers, spring is bad, harder to use one handed, $5
YA824A Blue Point spark plug wire pliers, nice shape, work fine, $10

Vacuum Grip No 96 needle nose pliers, OK tip, pitted, $4
70A external snap ring pliers, tip slightly ground by owner, $10
PRA25 Blue Point snap ring pliers, $8

 

[bluebolt]

Updated what is Sale Pending.


Started adding items.


3/8 drive:

Deep Metric set 11 pieces, 8, 10, 11,12,13,14,15,16,17,18,19. The 13 and 18 are 6 point and the rest are 12 point. 8 are new logo and 3 are old logo. The 13 and 18 have owners marks. $35 Sale Pending C#8


1/2" drive:
Impact shallow SAE socket set 11 pieces. 3/8, 7/16, 1/2, 9/16, 5/8, 11/16. 3/4, 13/16, 7/8, 15/16, 1". IM120 through IM320. The usual light corrosion found on these black oxide tools, some have more than others. No owners marks noted. I picked out the best ones for this set from both sets. $70.

Impact shallow SAE socket set 7 pieces. 7/16, 1/2, 5/8, 11/16, 3/4, 13/16, 7/8". No 9/16 unless one comes out of it's hidey hole LOL. A bit more corrosion than the first set. No owners marks noted. IM140 through IM280, no IM180 (9/16) $40

IM260 13/16" shallow impact socket, no owners marks, some corrosion $5

 

[bluebolt]

OK a few more things to post. I am trying to get everybody replied to.

ASA214A Pick set, the 3ASAA has a bent tip and plier marks on the handle. The other 3 look nice but do have light corrosion on the shafts. $20.

FX4 3/8" drive extension, old logo, good shape, $4.

TF936 1/4" drive flex ratchet, new logo, freewheels and needs a kit, some light chrome wear. $20. Sale pending C#1