the 2 SDS6's appear to be the only used ones in the larger size. One of the SDS6's is faded across the top, giving off a slightly lighter orange tint. There is a small nick on the faded one where the shank inserts, about halfway across the shank thickness. Doesnt appear to affect anything. Probably would never notice as its on the business end of the handle.
The other SDS6 only has marks from where the shank was inserted, like the 2 little marks on each side of the hole. Both bodies are good except for tape residue which should easily come off I imagine.
The largest handle appears to be for a file or prybar as the shank opening is quite large. Good candidate for a 1/2" ratchet I imagine to be pressed on.
The large handle with USA on it is perfect except for the same tape residue. (It appears all handles had a sticker on them at 1 point). Looks like it takes a number 2 shank of 1/4" flat shank.
The old body SSD style handle is perfect. Looks like it takes a larger shank, maybe number 3 phillips.
The medium sized handle is perfect with the before mentioned tape residue.
The 2 smaller SSD handles (black and orange) appear new with just tape residue.
Not pictured, but I also have 1 SDDP216 in black, brand new. Like this
Also not pictured, 2 Snapon test light handles, both clear.
Lastly, gauging interest, I may have 1 or 2 yellow handles that appear to be the size for a number 2 phillips or 1/4" flat blade. Not sure on those though.
Taking offers on these, so shoot some. The only price that is firm is the SDDP216, where I would need atleast $20 plus actual shipping. That is less than I paid after fighting on ebay for one.
Thank you
kevin
