Snap On KR-660/290 restore question

[jstroke]

I've been creepin around here for a month or so looking at info for the restore i am doing. I am having trouble finding replacement trim. I am wanting the five vertical pieces and all the drawer trim. Any help would be appreciated.
Thanks,

Jay

 

[JSBriggs]

KR660 http://buy1.snapon.com/catalog/part...group_id=7821&test=Roll+Cab;$0.00;KR660;34250

KR290 http://buy1.snapon.com/catalog/parts/pro_det.asp?Item_id=34107&group_id=7707

KR parts directory http://buy1.snapon.com/catalog/parts/product_directory.asp?pid=3450239

-Jeff

 

[mrholeshot]

Snap-On also sells the paint

 

[jstroke]

KR660 http://buy1.snapon.com/catalog/part...group_id=7821&test=Roll+Cab;$0.00;KR660;34250

KR290 http://buy1.snapon.com/catalog/parts/pro_det.asp?Item_id=34107&group_id=7707

KR parts directory http://buy1.snapon.com/catalog/parts/product_directory.asp?pid=3450239

-Jeff

I looked at the parts list for both boxes before and they are no longer available.

Anyone know of any aftermarket suppliers or found trim that might work from a different box?

 

[IDOXLR8]

I've been creepin around here for a month or so looking at info for the restore i am doing. I am having trouble finding replacement trim. I am wanting the five vertical pieces and all the drawer trim. Any help would be appreciated.
Thanks,

Jay

Jay, I did a complete restoration on my Snap On KR 650, KR 655, KR 290 combination and can shed a lot of light on what you are doing, PM sent, AL.

 

[fordbroncodave]

take those channels off and run them lightly against a wire wheel on a bench grinder. then hand polish them with a much finer brush or sand paper.

i recently bought a similar box with a smashed channel piece. i took it off and straightened it and put it back on

 

[SpiderGearsMan]

run it as is

 

[Toolhorder]

Snap on warranties that trim BTW.

 

[dylanr1977]

keep us posted on your progress. im about to start restoring my kr660 too. having trouble finding drawer slides.

 

[ctkiteboarding]

just got a 660 that needs 2 sliders and a side trim ,, how did you make out? any help with this would be great