Snap-On KRA vs KRL roller cab handle replacement

[SouthLake]

I've tried searching snap-on, google, here, coming up empty handed. Maybe if someone works in a shop where both models are present they could compare...

My KRA2411 (55" x 24") roller needs a new push handle (5213X50PV), it's pretty cheesy $25. If I'm going to replace the handle I'd rather have the nicer one off the KRL line. The KRL756 is 35" x 24", same depth as my KRA (handle 700J50PA) $95, less cheesy.

Does anyone know if these handles would be interchangeable? When I asked snap-on they where helpful but understandably not going to recommend I buy a part for something I don't have.

#firstworldproblems.

 

[pi_guy]

I have a KRA, KRL and a Epic. The handles seems specific to the model.
I do not think they interchange, but a little creativity with nutcerts or rivnuts would let you mount any handle you wanted.

 

[SouthLake]

Pi thank you, I was afraid of that
That epic must be pretty awesome

 

[pi_guy]

The Epic is the transmission cart they made for a few years.
A 3in 1 sitting on top. The drawers are filled with tooling for the machine.
The toolbox is seriously overloaded but rolls fine just needs a good push to get started.
My krl1032 and 1033 provide me with 144 inches of bench top most of which is filled they do not move handles are on opposite sides.