Snap on krl identification

[scsracing]

Evening guys and gals,

Just wondering if anyone could help my identify this KRL. I've had a image search for 72" krl's but can't seem to match it up.

Any help would be great please

 

[Billythekid1]

Kr1003

 

[scsracing]

Kr1003

Thank you, is there a big difference between the KRL1003 and KR1003?

 

[ttpete]

The part number and build date should be stamped on the rear side.

 

[fatfillup]

The part number and build date should be stamped on the rear side.

Too late model for a stamp. Should have a sticker on the back but of course that could be gone.

Since it appears to have only one lock verses 2, it should be newer then 2000 or so

 

[454ragtop]

Too late model for a stamp. Should have a sticker on the back but of course that could be gone.

Since it appears to have only one lock verses 2, it should be newer then 2000 or so

Should be another sticker inside if the one on the back is missing. Might try removing the lower left drawer.

 

[Heavy Metal Doctor]

Looks like 7000 series to me -- shorter height than 1000 series. I think they they turned one 4" drawer from the original 1000's into a 2" to come up with the 7000 series.

 

[WittHay]

The height of the 7003 is 41 3/8" and the 1003 is 45 13/16" They added three 4" drawers

I owned a KRL7003. Picture on left is KRL7003, right is KRL1003

 

[fatfillup]

Should be another sticker inside if the one on the back is missing. Might try removing the lower left drawer.

Now that is something I did not know And I have played with a lot of Snap on tool boxes.

 

[scsracing]

Thank you guys, collected today and its a KRL7003 as many of you have suggested.....bit gutted I could of had an extra 4" drawer but big boxes over here are much rarer.