To avoid these ads, REGISTER NOW!

Snap On, Matco, Cornwell, etc.. sockets, wrenches, screwdrivers, etc

J

justinmc

Well-known member
Joined
May 25, 2006
Messages
2,239
Location
KCMO
Time to clean out some more goodies... spent the weekend in the garage and basement going through stuff. As usual.. prices are OBO and prefer paypal gift payment or add 3% to the total to cover fees. Post then PM to establish pecking order on tools. Need to free up some cash and some space in the garage for other toys.


Lot of scrapers.. top to bottom
Cornwell CS8A NEW $15 shipped SOLD Cucvnut



Snap On scraper/awl
CSA12C carbon scraper... in good shape logo is a little faded $15 shipped
?? Handle says A181 but that is a panel tool.. looks like the smallest scraper or awl to me $10 logo faded. $10 shipped SOLD SSCustoms



Snap On panel tools
ASG186 red soft grip in good shape $15 shippedsold ApexPredator
ASG185 red soft grip in good shape $15 shippedsold ApexPredator
A159 for removing old style clips and window cranks like new $15 shipped
ALL OF THE ABOVE $35 shipped
SOLD


Matco 4pc WITTE HP40B pick and hook set.. near new with the exception of some faded logos. Tips in excllent/near new shape. $25 shipped sold ApexPredator


SIR tools plastic door and trim panel tools.. in good shape. $25 shipped
SOLD


Snap On hex socket drivers.. metric. 1/4" dr 4mm, 3/8" dr. 6, 7, 8 & 10mm. (4, 7 & 8 are BRAND NEW) $45 shipped SOLD SSCustoms



Snap On 211FSY 3/8" drive shallow 6pt SAE chrome socket set 1/4-7/8" used condition but decent shape. $50 shipped
SOLD


Cornwell CBSM82TSS 3/8" drive triple square socket set.. 4-16mm (8mm is the only one that looks used) $40 shipped PENDING StinkyBunny
SOLD


Snap On 1/4" drive 6pt chrome swivel sockets.. lot of 4. 8mm, 10mm, 12mm, 13mm $25 shipped SOLD gbfan



Cornwell magnetic bowl/dish.. $10 shipped SOLD Cucvnut



Mac RTL1129 10' retractable test leads... $15 shipped sold eddyyy302


Matco MD115B test light.. looks near new. $20 shipped
sold ApexPredator


Misc electrical service tools.. couple of alligator clip test leads some GB stripper/crimpers and a Trailer Buddy light/connection audible tester. $10 shipped sold eddyyy302


Facom NOS 6pc set... brand new in box. Nice drivers. I have some of the red handled ergo twists (same handle but don't have a hex blade) and they are
almost my favorites to use. $80 shipped
SOLD


Snap On soft grip mini screwdriver set..near new condition. No case or tray $25 shipped
sold Jallred


Snap On black hard handle ratcheting screwdriver with bits.. excellent condition. $40 shipped
SOLD


Matco PC12 12" cobra style pliers... $25 shipped SOLD daveblank



Cornwell SAE ratcheting wrench set.. 5/16-1" in good shape but used. Have the "flank drive plus" type ends on them. All seem to ratchet fine. $125 shipped SOLD Cucvnut



Matco SAE line wrench set...4pc 3/8 x 7/16, 1/2 x 9/16, 5/8 x 11/16, 3/4 x 7/8 these are NEW except some toolbox wear SOLD Stretch_LJ



Snap On R810S 1/4 x 5/16" ratcheting wrench with bit sockets (great for inside door panels, etc.) bits are marked USA and the 5/16" bits are Apex. $10 shipped
sold NJHandyGuy



Matco chrome adapters/reducers.. ALL NEW B3UB (3/8" swivel), B128A
(3/8" to 1/4" adapter), A812A (1/4 to 3/8" adapter) $15 shipped sold ApexPredator


Matco service tools...
MC2 2" telescoping mirror & magnetic pickup tool.. near new if not new. $20 shipped
sold ApexPredator
 
Last edited:
To avoid these ads, REGISTER NOW!
N

NJHandyGuy

Well-known member
Joined
Feb 21, 2010
Messages
3,997
Location
Brick Nj baby
i'll take Snap On R810S 1/4 x 5/16" ratcheting wrench with bit sockets (great for inside door panels, etc.) bits are marked USA and the 5/16" bits are Apex. $10 shipped
 
G

gbfan10

Well-known member
Joined
Jul 19, 2010
Messages
224
Location
Minnesota
pm sent on test light and Snap On 1/4" drive 6pt chrome swivel sockets.. lot of 4. 8mm, 10mm, 12mm, 13mm $25 shipped
 
E

eddyyy302

Well-known member
Joined
Jan 14, 2009
Messages
415
Location
North Jersey
I will take the Mac retractable test leads and the trailer buddy if you will sell it by itself.
PM sent.
Dan
 
B

blacK20

Well-known member
Joined
Mar 19, 2011
Messages
652
Does the matco bearing/race punch have an oval or round tip?
 
S

SSCustoms

Well-known member
Joined
Oct 30, 2007
Messages
98
Location
North Liberty, IA
I will take:

Snap On scraper/awl ?? Handle says A181 but that is a panel tool.. looks like the smallest scraper or awl to me $10 logo faded. $10 shipped

and

Snap On hex socket drivers.. metric. 1/4" dr 4mm, 3/8" dr. 6, 7, 8 & 10mm. (4, 7 & 8 are BRAND NEW) $45 shipped
 
To avoid these ads, REGISTER NOW!
OP
J

justinmc

Well-known member
Joined
May 25, 2006
Messages
2,239
Location
KCMO
Updated sold items... dropped a couple of prices to move this stuff. Got my eyes on some new toys. :)
 
OP
J

justinmc

Well-known member
Joined
May 25, 2006
Messages
2,239
Location
KCMO
68steiny said:
If the door trim tools are available, I will take them.

Jon
Click to expand...


Jon your profile doesn't allow PM's but the SIR door trim tools are available as is the Snap On A159 trim and window crank tool. If you setup your account to allow PM's shoot me a note and we can work out the details on payment, etc. Thanks.
 
K

kwhitelaw

Well-known member
Joined
Feb 24, 2008
Messages
1,273
still interested in the carbon scraper... amongst the other things we discussed thru pm..

let me know,
thx
kevin
 
F

flatsixcrazy

Member
Joined
Sep 4, 2011
Messages
10
Just received the Facom screwdriver set. The item was well packed, condition was just as described, and shipping was very fast. Thanks again Justin.
 
You must log in or register to reply here.
To avoid these ads, REGISTER NOW!
Top Bottom