To avoid these ads, REGISTER NOW!

Snap on platinum?

To avoid these ads, REGISTER NOW!
T

toddacimer

Well-known member
Joined
Sep 23, 2012
Messages
757
Location
Oshkosh, Wi
I only see 14 wrenches, yes its 28 sizes but not 28 wrenches.

Edit: maybe they are hiding in there. Still not $2000 worth. If they were combination wrenches up to 2" maybe but open ends aren't worth that much to me
 
Last edited:
C

CWP1616L

Banned
Joined
Aug 31, 2012
Messages
3,297
Location
USA
They're only expensive if you buy the whole set at one time. Buy three wrenches at a time and it's not so bad.
 
To avoid these ads, REGISTER NOW!
W

Wayfastwhitie440

Well-known member
Joined
Sep 21, 2010
Messages
359
Location
Florida
If you look at the third picture it shows all 28 pieces. I must not be a typical auto tech then. I bought a set of mac angle wrench set off e-bay for $200 shipped its either a 12 or 15 piece set. Ill get to y'all later with that. But it has a few over a inch. I use them quite often in the regular automotive field. The sets I always see people have is the sae set. Not sure why.
 
I

idahochevy

Active member
Joined
Nov 18, 2013
Messages
37
they come in real handy when you have all sorts of hydraulic valves, cylinders, pumps, and motors crammed into a tight place and you have to get the one line off that is behind all the others. Snap-on angle wrenches are really nice because they have a different angle on both ends then a normal wrench. I have Matco angles and the one side is the exact same angle as a normal wrench. Yeah, i didn't find that out till after i had bought the set.
 
C

crewchief888

Well-known member
Joined
Dec 3, 2009
Messages
13,749
Location
NW indiana
BearCuda said:
Heard that, been in the industry twenty years and don't even own " uh" angle wrench.
Click to expand...

i've been wrenching on const eq for 30 years,
i have them 3/8" to 1 5/8" from the gig 3 tool trucks. mostly bought them "as needed when needed"

i also have a 12mm and a 17mm,

the 17 is for HP fuel inj lines, i cant remember what i bought the 12mm for :headscrat


:beer:
 
W

Wayfastwhitie440

Well-known member
Joined
Sep 21, 2010
Messages
359
Location
Florida
idahochevy said:
they come in real handy when you have all sorts of hydraulic valves, cylinders, pumps, and motors crammed into a tight place and you have to get the one line off that is behind all the others. Snap-on angle wrenches are really nice because they have a different angle on both ends then a normal wrench. I have Matco angles and the one side is the exact same angle as a normal wrench. Yeah, i didn't find that out till after i had bought the set.
Click to expand...

Yaeh I believe my mac are the same as your matco. I also found out after buying. You think they would have been a little smarter about making them.
 
I

idahochevy

Active member
Joined
Nov 18, 2013
Messages
37
I guess i can't complain about mine too much. I got mine as a used set off the truck and only payed $300 for them. It is the set that goes from 3/8 up to 1 1/4.
 
N

nicksnothereman

Well-known member
Joined
Oct 19, 2013
Messages
3,608
Location
In the Mojave
nahuebsch82 said:
http://portland.craigslist.org/clk/tld/4190407741.html

Must be platinum plated lol

Sent from my ADR6425LVW using Tapatalk 2
Click to expand...

Nah, people only pay snap on prices off the truck because they don't have to pay for it up front. Just 20 bucks a week for the rest of your life (and possibly your childrens lives).:lol:

These look like obstruction wrenches to me. I guess they're rare in snap-on-ville, usa. They're...kind of handy, if you're a wrench guy.
 
O

oldldh

Well-known member
Joined
May 22, 2012
Messages
3,700
Location
Fairhope, AL
His asking price is about 20% off list...

Here's what you're getting for your two kilo-dollars...

Nice wrenches, but they're not that nice---
 

Attachments

  • snonopenend.jpg
    snonopenend.jpg
    125.7 KB · Views: 11
O

ol'Red

Well-known member
Joined
Dec 17, 2011
Messages
121
I love mine but not 2grand worth. JIC and pipe fittings are sae and nice to have on diesels and heavy equipment.
 
B

bobcatdan

Well-known member
Joined
Jan 4, 2011
Messages
9,948
Location
Kaukauna,WI
I traded a kra 4813 and still had to give mony to boot on my set up 1 5/8". I think the 1 5/8" was $140 ish alone. I'd like to get rest up 2", but with little to use, I'm in no hurry.
 
You must log in or register to reply here.
To avoid these ads, REGISTER NOW!
Top Bottom