snap on ratchet question

[JimmyM]

Hi all,
I did a search but had no luck there was thread started a while back about how to convert the small stubby 1/4" drive size snap on ratchet to 3/8 does anyone have the part number for the repair kit or any information as to how to go about doing that? I want to pass this information on to a friend

thanks Jimmy

 

[wrenchr]

FC936 is the part number for my mini 3/8.

 

[Merkava_4]

I want to pass this information on to a friend

Get the part number of your friend's 1/4 ratchet.

 

[a390st]

Last week there were two FCF936 ratchets on eBay. They are the flex version. I actually gave some consideration to buying them.

 

[Lz_69]

Here's the pn# rkrfc936 for the rebuild kit.

 

[Junkman]

Last week there were two FCF936 ratchets on eBay. They are the flex version. I actually gave some consideration to buying them.

I bought this one on ebay about a week ago. It works well, but the seller didn't mention that it has engraved initials on the handle. I didn't think to ask, so I guess that I can't complain. I haven't decided what type of feedback I will leave for ezm4721. I guess that it isn't what the seller tells you about the item that counts, but what they leave out.

 

[a390st]

Dang, Junk, I hate to hear that. That is a very frustrating thing when they leave out important details like engraving or the like. I'm trying to get an idiot seller to ship my item now a week after I paid. I'm about to the point of turning him since he won't answer an e-mail.

I do like that wrench, though, for things like interior and trim work. It would be really handy for work under the dash.

 

[buening]

Not to hijack, but could one take an F832 and put the internals from an F80 in it (converting from 32 teeth to 80 teeth)? I have a handful of snappy ratchets and would love to get the new 80 tooth ones, but if I could just swap the internals out of my ratchets then I'd be money ahead. I have a few 16 tooth and a few 32 tooth ratchets in 3/8" and 1/2" size.

Snap On probably have made it so you cannot do this, but thought I would ask! I'm new the the snappy tools, slowly getting away from the craftsmen ratchets

 

[wrenchr]

Not to hijack, but could one take an F832 and put the internals from an F80 in it (converting from 32 teeth to 80 teeth)? I have a handful of snappy ratchets and would love to get the new 80 tooth ones, but if I could just swap the internals out of my ratchets then I'd be money ahead. I have a few 16 tooth and a few 32 tooth ratchets in 3/8" and 1/2" size.

Snap On probably have made it so you cannot do this, but thought I would ask! I'm new the the snappy tools, slowly getting away from the craftsmen ratchets

Your right you can't do it.

 

[Merkava_4]

Not to hijack, but could one take an F832 and put the internals from an F80 in it (converting from 32 teeth to 80 teeth)?

No because to begin with the ratchet bodies are different sizes between the two - the 80 tooth gear requires a bigger head.

 

[wrenchr]

Head size has nothing to do with it.

 

[wrenchr]

F830 on the left ,F936 middle and F80 to the right.

 

[krusty the clown]

hey, that ain't red grease...........

 

[wrenchr]

hey, that ain't red grease...........

Very old pic.

 

[krusty the clown]

while we're on the subject. i was bored one day last week and decided to lube all 45 ( i'm no where near 'hound status) of my ratchets. i was surprised tp find that my old f720 had been rebuilt with 30 tooth guts!

 

[wrenchr]

while we're on the subject. i was bored one day last week and decided to lube all 45 ( i'm no where near 'hound status) of my ratchets. i was surprised tp find that my old f720 had been rebuilt with 30 tooth guts!

Was it from me? I update them most of the time.

 

[krusty the clown]

Was it from me? I update them most of the time.

no i bought it new in 1981........can't even remember getting it rebuilt