To avoid these ads, REGISTER NOW!

Snap On roller cabinet FS

L

Lump

Well-known member
Joined
Mar 16, 2009
Messages
3,405
Location
Jamestown, Ohio
I have decided to sell this Snap On Cabinet, model # KRSC40PJK. I bought it used for my shop, but it's too wide for the space I wanted to fit it into.
SnaponCab3.jpg


I bought it used. It's pretty dirty, but will clean up nicely, I think. Size is 40" wide X 20" deep X 45" high. I had new keys made for the two lock cylinders, which are loose and included inside.
SnaponCab4.jpg

Has a rubber mat fastened on top, with Snap On logo. Color is orange.
SnaponCab5.jpg

Lid stays up nicely, so the struts are good. (Tools inside are NOT included.)
SnaponCab6.jpg

Drawers have locking latches under each lip, at right side.

Price is $700. It can be picked up in southwestern Ohio. PM me with any questions. Thanks.
 
To avoid these ads, REGISTER NOW!
D

Deafautotech

Well-known member
Joined
Jan 5, 2007
Messages
7,653
Location
Indianapolis, Indiana
OOH!!! damn it.. i wish you are near Indianapolis, Indiana...

i did check the map and it is about 2 hours and 40 minutes away from my home...

sent the PM...
 
Last edited:
B

Bull

Super Moderator
Joined
Dec 12, 2005
Messages
16,189
Location
MA
Deafautotech said:
OOH!!! damn it.. i wish you are near Indianapolis, Indiana...

i did check the map and it is about 2 hours and 40 minutes away from my home...
Click to expand...

That's definitely road-trip distance for a nice SO cabinet!
 
OP
L

Lump

Well-known member
Joined
Mar 16, 2009
Messages
3,405
Location
Jamestown, Ohio
Per request, here are some more photos of the orange Snap On cart (or "cabinet," if you prefer).
SnapOnorngcab6.jpg

Above you see a better view from the side of the entire box.
SnapOnorngcab7.jpg

Above is a photo of the inside of the lower shelf area. You can fit objects about 10" inside, underneath the folded lid.
SnapOnorngcab5.jpg

Here you see a tape measure inserted down through the tool mounting holes under the lid. You could put a 37" long tool down through the hole, and still shut the lid.
SnapOnorngcab4.jpg

The largest holes are about 1.125" in diameter. There are rows of tool holes on both sides of the box, under the lid.

The lock cylinders are included, but not mounted. I had a new key made for them.
If anyone wishes to see more photos, or different areas, just let me know. :thumbup:
 
B

Boiler

Well-known member
Joined
Nov 20, 2009
Messages
1,967
Location
Indiana
I drive 2 hours each way just about every weekend with the HOPE of buying tools...get over there and get it!
 
4

4rcFed

Well-known member
Joined
Jan 22, 2011
Messages
108
Location
Pittsburgh, PA
Shoot me a PM and I can put you in contact with a few guys that do a lot of hauling around the KY/OH/IN area. I just moved from central KY otherwise I could haul it your way, asI used to pick up some cars out in IN.
 
B

bindernut

Well-known member
Joined
Aug 28, 2009
Messages
728
Location
St. Louis
Deafautotech, buy it! grab your girlfriend & make a road trip.
Guys, I have met Lump in person, and sold him some stuff. He is a top notch guy to deal with.
 
To avoid these ads, REGISTER NOW!
T

Todd.Brock

Well-known member
Joined
Jul 15, 2008
Messages
4,250
Location
Cincinnati
Andy, that is a fun road trip distance. my brother and I drove about 2.5 hours to pick up our lift. It was totally worth it. I only wish I knew a 1/3rd as much about it as you can see from the pics! Good luck with it!
 
D

Deafautotech

Well-known member
Joined
Jan 5, 2007
Messages
7,653
Location
Indianapolis, Indiana
Todd.Brock said:
Andy, that is a fun road trip distance. my brother and I drove about 2.5 hours to pick up our lift. It was totally worth it. I only wish I knew a 1/3rd as much about it as you can see from the pics! Good luck with it!
Click to expand...

i am agree with you as i would like to meet other member while buy tool or cart... but i dont have my place yet and i am in process of buy a house with big garage but found out about bad termites at base and RIM woods.. so i need to have a space so i could go and get that cart...
 
B

Bull

Super Moderator
Joined
Dec 12, 2005
Messages
16,189
Location
MA
Deafautotech said:
i am agree with you as i would like to meet other member while buy tool or cart... but i dont have my place yet and i am in process of buy a house with big garage but found out about bad termites at base and RIM woods.. so i need to have a space so i could go and get that cart...
Click to expand...

Parents' house? Work? Friend's house?

A box like that doesn't take up much space, does it?

It's your call, but if you want it, you can make it happen.
 
D

Deafautotech

Well-known member
Joined
Jan 5, 2007
Messages
7,653
Location
Indianapolis, Indiana
Bull said:
Parents' house? Work? Friend's house?

A box like that doesn't take up much space, does it?

It's your call, but if you want it, you can make it happen.
Click to expand...

my parent's garage are full... it keep my harleys, four toolboxes in.. my work i has KRL1203/KRL1003, MSC12, and craftsman 41 in wide bottom box with harbor freight locker.

my brother's garage are full of his and his wife stuffs... i cant buy if i has no rooms to keep...
 
N

nevets

Well-known member
Joined
Dec 17, 2010
Messages
73
Location
South Carolina
If i were wanting to buy it but had no space id put it in my room as a bedstand untill i found a place for it. Im sure you got somewhere it can sit for a little while :bounce:
 
D

Deafautotech

Well-known member
Joined
Jan 5, 2007
Messages
7,653
Location
Indianapolis, Indiana
nevets said:
If i were wanting to buy it but had no space id put it in my room as a bedstand untill i found a place for it. Im sure you got somewhere it can sit for a little while :bounce:
Click to expand...

believe me, i can do anything to get that cart and keep somewhere BUT i just could not do that as if i do that, it would make more problems for me. so i have to wait and see.
 
OP
L

Lump

Well-known member
Joined
Mar 16, 2009
Messages
3,405
Location
Jamestown, Ohio
Someone suggested that I find out what these sell for new. I found it on Snap On's site, and the price for a new one is $1,590. Perhaps more importantly for you, the site has better details on the specs of this tool cart. Here is a link to the correct page on the Snap On site, if you want to check it out. I wish this thing would have fit between my air compressor and work bench!
http://buy1.snapon.com/catalog/item...=20825&supersede=&store=snapon-store&tool=all
 
Last edited:
OP
L

Lump

Well-known member
Joined
Mar 16, 2009
Messages
3,405
Location
Jamestown, Ohio
Hmmm. Maybe I need to rearrange my shop and just keep this tool cabinet (cart?). I dunno. I'll bump it just this one time. Anyone find it interesting?
 
OP
L

Lump

Well-known member
Joined
Mar 16, 2009
Messages
3,405
Location
Jamestown, Ohio
Someone suggested that I should bump this tool cart/cabinet one more time. I always thought you should not bump too often, but I will try once again.

I thought about keeping this in my shop; replacing one of the tall Craftsman tool box combos I use now. I do like the deeper drawers, which would let me use the Hanson socket holders. But it would have to go right where I have my solvent tank now, and I don't want to move that. Hmmmm. You know, I never move my tool box around the shop anywhere. With only two bays, there is no point. Whaddaya think, guys?
 
OP
L

Lump

Well-known member
Joined
Mar 16, 2009
Messages
3,405
Location
Jamestown, Ohio
Last year I put this tool box in the classifieds, and thought it was sold for a while. But then that deal fell through, and I stopped thinking about it. So, here is an OLD bump. Anyone interested in this Snap On cart/box? Send me a PM
 
You must log in or register to reply here.
To avoid these ads, REGISTER NOW!
Top Bottom