SIVART0506
Well-known member
- Location
- Las Cruces, NM
- Price
- varies
PRICE DROP!!!!!!!!!!!!!!!!!!!!!! $1200 cash takes them- the pair of boxes and the rollcart. Freight is actually not that bad on these as it is 1 pallet at roughly 650 lbs.
I have a few Snap-On single bank toolboxes/rollcabs for sale. I will do anything and everything I can to make shipping as cheap as possible,(including delivering to the 'hub' in El Paso, etc....) Can email pics, until I can figure out how to resize them and post here. You can see a few on C-list in Las Cruces, NM or El Paso, TX.
1- Matching pair of KRL 656 8 drawer single bank boxes. There is some minor cosmetic damage to the exterior, but is still all basically straight. 1 set of slides need to be replaced,(might be able to get warranty if your guy is friendly). There is some minor chipping on some drawers above the trim pieces, but otherwise the drawers are perfect inside.(had tool control foam with kits). These are really handy as large carts or anywhere you need maneuverability. Asking $1500 for both and can throw in a matching 2 tier cart if you want too. Have keys for both.
2- Snap On KR650 with 655 topbox,(I'll have to pull them and check them) This set is prime for someone who wants to do a pretty simple restore. They were stored in an outdoor carport for 5 years or so and need a full disassemble, clean, etc..... Probably needs about 4 or five sets of new slides, some minor door handle straightening, on about 1/2 of the drawers. This is a great set-up for lots of storage using minimal square footage. No keys included. Asking $500
I have a few Snap-On single bank toolboxes/rollcabs for sale. I will do anything and everything I can to make shipping as cheap as possible,(including delivering to the 'hub' in El Paso, etc....) Can email pics, until I can figure out how to resize them and post here. You can see a few on C-list in Las Cruces, NM or El Paso, TX.
1- Matching pair of KRL 656 8 drawer single bank boxes. There is some minor cosmetic damage to the exterior, but is still all basically straight. 1 set of slides need to be replaced,(might be able to get warranty if your guy is friendly). There is some minor chipping on some drawers above the trim pieces, but otherwise the drawers are perfect inside.(had tool control foam with kits). These are really handy as large carts or anywhere you need maneuverability. Asking $1500 for both and can throw in a matching 2 tier cart if you want too. Have keys for both.
2- Snap On KR650 with 655 topbox,(I'll have to pull them and check them) This set is prime for someone who wants to do a pretty simple restore. They were stored in an outdoor carport for 5 years or so and need a full disassemble, clean, etc..... Probably needs about 4 or five sets of new slides, some minor door handle straightening, on about 1/2 of the drawers. This is a great set-up for lots of storage using minimal square footage. No keys included. Asking $500
Last edited: