Snap On style wrench rack?

[Matt018]

I am going to order two sets of williams wrenches and the company says that they only come with a vinyl wrench pouch I know that Im going to want a tray as thats what im used to and its allot faster than using a roll in a toolbox. So I was curious if anyone knew where to get wrench trays like what snap on wrenches come with?
Here are the two sets:

http://www.toolsdelivered.com/Williams-11012-Hand-Tools-Wrenches-Combination-Metric-Sets

http://www.toolsdelivered.com/Williams-11002-Hand-Tools-Wrenches-Combination-SAE-Sets

If there is only a 10 piece tray and a 15 piece tray thats fine... I dont need them to match perfectly. Im just looking for a good orginizer.

 

[Sage55]

Would something like this 15 wrench tray work for you?

They also have a 12 wrench tray.

 

[Steevo]

Vim Tool, Ernst, Northern Tool, Amazon . . .

http://www.google.com/#hl=en&cp=8&g....,cf.osb&fp=1a8f808b85e7bcfd&biw=1178&bih=658

 

[bbs lm-r]

I believe Ernst makes the soft grip wrench racks for S/O, I could be wrong though. I have the Ernst ones and they're great, they hold the wrench with just enough force to keep them in place if you move the rack around, but you can easily lift a wrench up with two fingers

http://www.ernstmfg.com/products_gripper_main.php

 

[Sage55]

Nice prices on those ernst racks!

 

[GBNZ]

I believe Ernst makes the soft grip wrench racks for S/O, I could be wrong though. I have the Ernst ones and they're great, they hold the wrench with just enough force to keep them in place if you move the rack around, but you can easily lift a wrench up with two fingers

http://www.ernstmfg.com/products_gripper_main.php

They do and Snap On puts on the "KA CHING" ($$$$$$)

 

[G1GRANDEUR]

Pretty much most SO accessories are made by other company.

I ordered Ernst gripper yesterday. (15 wrench holder) I hope 24mm wrench fit.

 

[fordbroncodave]

same as off the tool trucks but with color variety and 1/2 the cost. i have probably 12 of these in different colors and sizes.

the real deal:

http://www.tiretoolsonline.com/Protoco-1030-12-Piece-Wrench-Rack-Yellow-PR1030_p_41837.html

 

[Fedwrench]

Wrench rails

They can be trimmed to fit most drawers, you can tailor them to fit any set, and there's no wasted space.

http://buy1.snapon.com/catalog/item...d=3225&supersede=&store=snapon-store&tool=all

 

[Brentocool]

Any tool truck.

 

[Skin]

Wrench rails

They can be trimmed to fit most drawers, you can tailor them to fit any set, and there's no wasted space.

http://buy1.snapon.com/catalog/item...d=3225&supersede=&store=snapon-store&tool=all

Got myself a couple sets of these the other day. Wrench racks take up too much room. My next stop was laying the wrenches upright in the coils of a spring.

 

[not-required]

Wrench rails

They can be trimmed to fit most drawers, you can tailor them to fit any set, and there's no wasted space.

http://buy1.snapon.com/catalog/item...d=3225&supersede=&store=snapon-store&tool=all

I second this. These rails are great!

 

[kapster]

Do the wrenches ever fall out of their slot?there isnt much holding them in place

 

[wrh3]

I think Ernst makes the rails for SnapOn too....

http://www.ernstmfg.com/products_wrenches_rail.php

 

[CamarosRus]

FEDWRENCH, 1) Are we better off buying the "40 wrench" longer model and cutting to
whatever misc length we want, OR "20 Wrench version"
2) If placing on top of Snap On KRL black drawer liner material (for one example) are we better off ordering Plain (bottom) OR with magnetic bottom surface.......

Thanks for your always valuable experience,

 

[GBNZ]

I think Ernst makes the rails for SnapOn too....http://www.ernstmfg.com/products_wrenches_rail.php

There not the same Ernst are taller made in USA.

Snap Ons are lower made in CHINA.

 

[GBNZ]

Pretty much most SO accessories are made by other company.

I ordered Ernst gripper yesterday. (15 wrench holder) I hope 24mm wrench fit.[/QUOTE]


24mm will fit in the Ernst i just tried one.

 

[BajaBound]

Thats been my concern with how thick the beam is on the Williams.

 

[JASTECH]

I have the SO cut to fit rails and don't like them a bit. The beam on some wrenches don't fit good and the wrench seems to slide off a rail if jostled a touch. Also, they came with sticky foam to attach the drawer liner and moves liner with wrenches. I will try Ernst and buy w/magnets or attach myself.

 

[Matt018]

I made two spring style holders out of house wire. White for standard and black for metric. It works ok.

 

[G1GRANDEUR]

24mm will fit in the Ernst i just tried one.

Yup they do, just got mine for regular 10-24mm and Flank Drive Plus 10mm-24mm.

 

[JASTECH]

Will the ratcheting wrenches fit? I have them in Cornwell, Snap-On and MAC. The trunk of my Williams SuperRench's are thick too.

 

[bbs lm-r]

If they're thinner ones like these then yes, I have a GW ratchet wrench set in one

But my thicker CMan ones like these won't fit

(talking about the Ernst gripper racks)

 

[kapster]

I'm looking for racks for my williams supercombos i just bought, up to 1 1/4. Can I go with standard ernst rails or do I need the low profile to fit in a 2.25" drawer? I'm kind of doubting the bigger sizes would even fit in the reg racks.


http://www.ernstmfg.com/products_wrenches_stationary.php

http://www.ernstmfg.com/products_lowpro_wrenches.php