Snap on tool box frustration….

[Jersey Drew]

So after about a year with my used snap on 7022 I have realized that while the box is pretty decent the drawer liners are utter ****! And the biggest problem is that they are so deep I can’t find any drawer liners that would work. These things don’t hold anything in place not even themselves my tools usually slide 2 to 3 inches towards the back of the drawer. I am not even in this toolbox all that often and these liners are constantly sliding back.

I had better luck with husky and craftsman toolbox liners.

 

[Ton ton]

Sorry about the bad luck.

 

[Htscheg]

If they arent working its probanly cause they arent the original drawer liners, Ive had mine for over 7 years and they are still working fine

 

[Jersey Drew]

If they arent working its probanly cause they arent the original drawer liners, Ive had mine for over 7 years and they are still working fine

If they are aftermarket I can’t seem to find any drawer liners other than the originals in 29 inch deep.

 

[designer485]

Use this material.
https://www.bakedeco.com/detail.asp?id=13025

It is awesome. It keeps everything in place and has just enough tack on both sides to make sure it never moves. 36in width is plenty wide to get the job done unlike most drawer liner material made for shallow boxes.

 

[j3rf]

Bit strange, I've had the same original drawer liners in my Classic since 2008 and have no issues with them sliding around.

 

[richfinn]

Stick the liners down with double sided foam tape

I don't suffer with tools sliding around because I have so much stuff ram packed into the drawers there's nowhere for it to go

 

[Mr_B]

REDI-GUARD Tm TOOL BOX LINER - 72

# 1 Preferred Option for Do it yourself Tool Box owners Thickness: 1/16" Color: Black Attributes: Anti-Corrosive, non-sliding, dense material for the professional! MADE IN THE USA - Rolls are shipping 72" Wide UNFOLDED on a flat cardboard core. - Easy to cut yourself! - Enough material for...

nsimaterialsgroup.com

be careful of cheap options and options are fairly limited once over 24" deep drawers, have seen corrosion issues to tools from unsuitable materials and problems of short life as material degrades and and causes problems, the above linked liner comes in 2 tack levels and you sound like a high tack guy .