To avoid these ads, REGISTER NOW!

snap on tools on amazon

To avoid these ads, REGISTER NOW!

kythri

Well-known member
Joined
Jan 3, 2007
Messages
6,330
Location
Lebanon, OR
You wouldn't be buying an Amazon tool, though. You'd be buying a Snap-On tool, through Amazon.

If it's the same tool, I don't see the big deal - it's still a Snap-On tool, and if Snap-On would make Amazon an official marketplace, it'd still have the same warranty as if you bought it direct from Snap-On...
 

Harry Gerrard

Banned
Joined
May 23, 2013
Messages
69
Location
NW Ohio
You wouldn't be buying an Amazon tool, though. You'd be buying a Snap-On tool, through Amazon.

If it's the same tool, I don't see the big deal - it's still a Snap-On tool, and if Snap-On would make Amazon an official marketplace, it'd still have the same warranty as if you bought it direct from Snap-On...


Would you be ok if Harbor Freight started carrying Snap-On?
 

Harry Gerrard

Banned
Joined
May 23, 2013
Messages
69
Location
NW Ohio
Stores have reputations for quality, service, etc.. As do the existing retail outlet for the premium tools (i.e the tool trucks). Some people like that level of service, they like the truck coming to them. They like forming a relationship with the driver. They don't want to loose that to the Amazons and other online retailers.
 
To avoid these ads, REGISTER NOW!

kythri

Well-known member
Joined
Jan 3, 2007
Messages
6,330
Location
Lebanon, OR
For everyone that thinks one particular entity has a good reputation for quality/service, there's another that disagrees.

As for these hypothetical customers, then, they can continue to buy through the channel they're comfortable with. If that's the dealer, so be it.
 

Davefr

Well-known member
Joined
Jan 7, 2010
Messages
11,823
Location
OR
Would you be ok if Harbor Freight started carrying Snap-On?


HF is the only dedicated tool store chain in the US. Yes, they should carry a premium USA brand. (good, better, best merchandising strategy)

I always thought SK would be a good choice. (or maybe Williams)

There's no law that says everything sold at HF has to be the crappiest Chinese/Indian junk.

Can't they dedicate a small corner of the store for good stuff???
 

Harry Gerrard

Banned
Joined
May 23, 2013
Messages
69
Location
NW Ohio
For everyone that thinks one particular entity has a good reputation for quality/service, there's another that disagrees.

As for these hypothetical customers, then, they can continue to buy through the channel they're comfortable with. If that's the dealer, so be it.

woooooooooooooo :rocker::rocker::rocker::rocker::rocker:
 

neophyte

Well-known member
Joined
Apr 23, 2012
Messages
9,619
Location
Pennsylvannia
HF is the only dedicated tool store chain in the US. Yes, they should carry a premium USA brand. (good, better, best merchandising strategy)

I always thought SK would be a good choice. (or maybe Williams)

There's no law that says everything sold at HF has to be the crappiest Chinese/Indian junk.

Can't they dedicate a small corner of the store for good stuff???

I thought that harbor freight did carry some higher quality items at some point way back when. Maybe even some USA made stuff?

I wouldn't be surprised if the better tool companies were worried having their tools sold with the typical selection of Harbor Freight stuff would lower their brand value.
 

mech-tech

Well-known member
Joined
Apr 13, 2012
Messages
528
I seem to remember years ago seeing an sk torque wrench and sk socket set along with a few ingersol rand products and channel lock pliers in the harbor freight tool ad
 

willf650

Well-known member
Joined
Mar 10, 2010
Messages
805
I've bought SK sockets through Harbor Freight but that was probably 20 years ago.

You guy's remember when you first started feeling old. I'm going through that at the moment.
 

Mohawk Dave

Well-known member
Joined
Oct 7, 2012
Messages
5,068
Location
SoCal
I wish SOMEONE would carry good tools at a B&M chain store. We got a couple mom-n-pops places that carry Proto, SK, etc...but few and far between. So that leaves pretty much trusting you guys and buying stuff online with hopes that I like it. Which I always do, but I'd buy more if I could walk in and pick it up. Splurge ya know.
 

oldtools

Well-known member
Joined
Sep 15, 2008
Messages
2,706
Snap On can make a lot more business by catering to dyier in addition to professional mechanic. They should sell their tools through retailer (like HF) to cater to dyier while still maintaining truck franchise for the professional. Can't wait for the parking lot sale.
 

sloppy

Well-known member
Joined
Mar 3, 2013
Messages
481
Location
Ohio
Would you be ok if Harbor Freight started carrying Snap-On?
Sure. Why would that be bad? First off they would only carry it for a short time because it would not sell. Which would then lead to the brand getting dropped, which would lead to me getting some super dupper awesome deals on SO **** from HF. Dont see the down side.
HF is the only dedicated tool store chain in the US. Yes, they should carry a premium USA brand. (good, better, best merchandising strategy)

I always thought SK would be a good choice. (or maybe Williams)

There's no law that says everything sold at HF has to be the crappiest Chinese/Indian junk.

Can't they dedicate a small corner of the store for good stuff???
They have and still do carry some items that are premium label stuff. Seems to collect dust.. I am pretty sure my SK torque wrench came from HF but like others I am feelin old and not a 100% sure on that one. :D
I thought that harbor freight did carry some higher quality items at some point way back when. Maybe even some USA made stuff?

I wouldn't be surprised if the better tool companies were worried having their tools sold with the typical selection of Harbor Freight stuff would lower their brand value.
I have gotten DeWalt stuff from HF and I have quite a few other oddball tools from HF that have made in USA stamped right on them.. They are just like any other distributor if they can get a product cheap and make money they will..

I would imagine its not the major brand worrying about hurting their name at all. Its probably more about HF having some Major brand name product sitting side by side their product and not selling...
 
Last edited:

General Geoff

Well-known member
Joined
Jan 12, 2013
Messages
3,873
Location
Allentown, Pennsylvania
It would be awesome if HF sold Snap-on or some other high quality USA made brand, but as mentiond by others, it would sit and collect dust for the most part, unless and until the word spread that HF was an authorized retailer for Snap-on. I think it would be good if they kept a small locked glass display case with the most popular hardware (Ratchets, screwdrivers, basic socket sets and extensions, that kind of thing), and had a large catalog of everything else that can be ordered, and show up same-day or next-day from a local franchiser who can stop at the HF during their rounds.
 

trout

Well-known member
Joined
Jan 5, 2011
Messages
612
Location
Pennsylvania
Snap On can make a lot more business by catering to dyier in addition to professional mechanic. They should sell their tools through retailer (like HF) to cater to dyier while still maintaining truck franchise for the professional. Can't wait for the parking lot sale.
I've known more than a few drivers who don't mind the paying customers knowing their route schedule.
 

ilovevocs

Well-known member
Joined
Jun 26, 2009
Messages
1,966
Location
Toledo, Ohio
If I was a franchise owner and snap-on started to sell direct through amazon I would be very upset. IMHO, they would be betraying their franchises to develop another means of distribution / retail. I just don't see this happening. Maybe a b+m retail once an agreement was struck with local truck owners but not an international online retailer. They would have to be pretty desperate to make such a move.
 
Last edited:

mopar01

Well-known member
Joined
May 18, 2012
Messages
678
Location
Angola IN
If I was a franchise owner and snap-on started to sell direct through amazon I would be very upset. IMHO, they would be betraying their franchises to develop another means of distribution / retail. I just don't see this happening. Maybe a b+m retail once an agreement was struck with local truck owners but not an international online retailer. They would have to be pretty desperate to make such a move.

I agree 100 percent. Just would seem to cheapen their name that they have buit up.
 

rickhigginshtbr

Well-known member
Joined
Aug 7, 2012
Messages
1,551
Location
Lower Bucks, PA
HF is the only dedicated tool store chain in the US. Yes, they should carry a premium USA brand. (good, better, best merchandising strategy)

I always thought SK would be a good choice. (or maybe Williams)

There's no law that says everything sold at HF has to be the crappiest Chinese/Indian junk.

Can't they dedicate a small corner of the store for good stuff???

No, people would either A, freak out and start a riot, or B, it would cheapen said name brand.

I agree 100 percent. Just would seem to cheapen their name that they have buit up.

Not necessarily with Amazon though... yea, there's some junk on there, but the ratio of junk vs. quality on Amazon is a lot lower than that ratio with Sears.
 
To avoid these ads, REGISTER NOW!
Top Bottom