Snap-On wrench rack comparison

[Catamount]

Just received my SO KRA15A (smaller wrenches) and SO KRA22A (larger wrenches) so I thought I'd post them.

I bought 2 sets of each. In retrospect, most wrenches up to 18mm / 3/4" fit great in the KRA15A, and you can fit more of them. I probably did not need any of the KRA22A racks.

They are 24" long. I cut about 1" off of each rack to get them to fit inside my drawers. So they come about 1" longer than you see here.

They have adhesive on the bottom to hold them in place, but I found that the weight of the wrenches and the snug fit in my drawer does a good enough job with that. So I have not peeled back the adhesive yet.

KRA15A on the left. It holds more wrenches. KRA22A on the right.

Metric drawer:

SAE drawer:

KRA15A. $13.00 with free shipping.

http://buy1.snapon.com/catalog/item...&group_ID=3225&store=snapon-store&dir=catalog

KRA22A. $13.40 with free shipping.

http://buy1.snapon.com/catalog/item...&group_ID=3225&store=snapon-store&dir=catalog

 

[powertrip]

They come in red?

 

[Catamount]

They come in red?

From what I understand, the ones that come off of the truck are red and the ones that come from online purchases are black.

 

[zbadass28]

snappy does not offer in red anymore. I just bought a set of KRA22A and asked my dealer to get the red ones and they are no longer avaliable.

 

[supra90turbo]

Sweet. Just ordered a KRA15a. We'll see how the larger Craftsman Pro's fit in it. I'll just modify if necessary

Thanks for the pictures!

 

[Catamount]

Sweet. Just ordered a KRA15a. We'll see how the larger Craftsman Pro's fit in it. I'll just modify if necessary

Thanks for the pictures!

They will fit well! I have Craftsman Pro wrenches in my KRA15A as well. Here they are:

 

[zbadass28]

The KRA15A and the KRA22A are the only ones I found that i really like they hold all my Snap On wrench very nice. the only problem i have is i have a lot of metric wrenches, and my bigger size wrenches will not sit in the holders the open end hits the tool box bottom i thinks i have an idea to fix this problem. i could use the bigger KRA22A but i wont be able to fit all the wrenches in the drawer the way i like them to be. KRA22A are the 4 way angle head set in the middle of the drawer and all other racks are KRA15A.

View media item 16321

 

[crazy1]

What is the best tool to use to cleanly cut the KRA15A?
thanks.....

 

[Catamount]

What is the best tool to use to cleanly cut the KRA15A?
thanks.....

I used a grinder with a cutting wheel. Like a knife through butter.

 

[thaghost87]

nice. i'm waiting for my snap on guy to get more on the truck. He just sold out when I called to get mines.

 

[cotjocky]

I love those things! I have a set that goes sideways in my tool cart. From left to right, a set of metrics 19-10 then my metric ratchet wrenches 19-10 and then a set of SAE 1 1/16-1/4 all on that one wrench rack.