Snap On wrenches; Craftsman socket lots; Big Wrenches; K-D auto stuff; S-K singles

[shimrod]

Location

Cranston, RI

Price

Varied

Snap On rats + wrenches; C-man socket lots; Big Wrenches; K-D auto stuff; S-K singles

8/9: Note - always willing to trade for collectible knives: custom, midtech, production; fixed, folders, or tacticals, you name it!

8/6: Price drops on Snap On sockets.
8/3: Added option to take all S-K stuff for $45 shipped. Added option to take all Craftsman socket lots for $100 shipped. Added option to take all the remaining auto tools ($200 worth as listed) for $100 shipped. Added a bunch of Snap On sockets.

Got a lot to move here, and more to come shortly! Please take a look and see if there is anything you need.

Payment by paypal or money order - prices include fees. If shipping is included, it will say so with the price, otherwise not, since there are a lot of singles in this listing. Flat rates whenever possible, we all know how much they are! Items ship from Cranston, RI.

Prices are not particularly firm - offers are ok on just about anything, multiple discounts, or even single discounts. If you want it, try me. This stuff has to go!

Respond via pm, or email to sgentili at alexandersuniforms with a "com" after the dot.

Part Zero - Newest Stuff, Snap On Sockets
Pics, 3/8"-drive: http://s1176.photobucket.com/albums/x325/shimrod69/Tools/Snap On/Sockets - 3Eighths Drive/
Pics, 1/2"- and 1/4"-drive: http://s1176.photobucket.com/albums...Snap On/Sockets - Half-Inch and Quarter-Inch/

SO-S1: 9x 1/2"-drive impact: 6 deep - 1/2, 9/16, 5/8, 11/16, 3/4, and 1". 3 shallow - 9/16, 3/4, and 7/8. The deep 1/2, 9/16, and 3/4 all had rust removed and there is remnants of that, but they'll work, just not pretty. No markings. Definitely some rounding. $50 $45 shipped. Pics - http://i1176.photobucket.com/albums... and Quarter-Inch/SOSocketsBigandSmall003.jpg
SO-S2: 9x 1/2"-drive, 12-pt., SAE: 7/16, 1/2, 5/8, 11/16, 13/16, 7/8, 2x15/16, and 1". Some good, some just OK, some pretty darn old. No markings. $45 $40 shipped.
SO-S3: 3x 1/2"-dr, hex, SAE: SA10A(old 5/16), GSA10E(new-logo industrial 5/16), SA16A(1/2). See tip condition in the pics. $20 $17 shipped.
SO-S4: 4x 1/4"-drive, SAE: 11/32, 3/8, 7/16, 1/2. Shiny unused. $21 $17 shipped. SOLD

3/8"-drive:

3/8"-drive:
SO-S5: 12 deep 6-pt metric: SFSM8 - SFSM19 (8 to 19mm). New-logos and excellent, except for the 13mm, which is a bit worn and has a looping grind mark on it, like it was attacked by a madman with a die grinder.
Pic:http://i1176.photobucket.com/albums...ckets - 3Eighths Drive/SOSocketsMedium003.jpg........$75 $70 shipped. SOLD
SO-S6: 10 deep 6-pt SAE: SFS101 to SFS281, that is, 5/16 to 7/8. Old logos, except the SFS121 and 241 are new logo. The 5/8(SFS201) and 13/16(SFS261) have a light "B" scribbly-graved on them. Plus 4 extras, 3 with light "B" engravings: 3/8, 1/2, 7/8, 13/16. So 14 total. $50 $45 shipped. SOLD
SO-S7: 10 shallow 6-pt metric: 8, 10, 12, 13, 14(new logo), 15, 17, 18, 21, 22. All except the 8, 14, and 15 have a light "B" scribed into them. Plus 3 extras: 10(excellent), 14(mangled drive-end), 18(nearly new). Overall, this mixed-logo set is in great shape on the working ends. $45 $40 shipped.
SO-S8: 2 shallow 6-pt SAE: FS221(11/16) and FS281(7/8). New logo, excellent - $19 $17 shipped.
SO-S9: 5 swivels, SAE: FS16A(1/2"), fair; 3xFS18(9/16), 1 new logo and good, 1 old industrial, 1 floppy old; F-24, and old but excellent 3/4". Er...good lot for someone who really needs 9/16", heh. $27 $23 shipped. SOLD
SO-S10: 5 hex and 1 triple-square: 6, 8mm; 3/8" long; new logo 3/16" and 5/16". FTSM8C 8mm triple square. $25 $22 shipped.


Part 1 - Snap On Wrenches - Pics: http://s1176.photobucket.com/albums/x325/shimrod69/Tools/Snap On/Wrench/

S-O:W8: (6) OEX wrenches, underlined logo: OEX-14, OEX20, OEX22 and OEX-22, OEX-24, OEX-28. All work beautifully, no beauty prize winners though. These are not engraved or stamped, but there are 3 grinds on the OEX22. $35 $32 shipped or offer. SOLD
S-O:W9: GSOEX24, unused and perfect. $14 $12 SOLD before shipping.
S-O:W10: GOEX20B, unused and perfect. $10 $8 before shipping.

S-O:W11: OEXL16, old underlined logo. Some chrome loss and tiny corrosion pits; good working condition. $7 $6 SOLD before shipping.
S-O:W12: RXFS2022B flare wrench, new logo, excellent condition, just a tiny bit of chrome was scraped off one of the wrench heads. $10 $9 before shipping.
S-O:W13: (2) OEX stubbies, underlined logo: OEX120 and OEX200 - each has a very light (buff-outable) engraving of a "B", and a little rust. Great working condition. $10 $8 before shipping.
S-O:W14: (3) OEX stubbies, underlined logo: OEX-120, OEX220, OEX240. Good condition, no marks, just a bit of chrome gone on the OEX-120. $17 $15 before shipping.
S-O:W15: RXS12 open/flare combo, new logo, great condition + RXS14 open/flare underlined logo, works fine, but in absolutely awful shape, marks, chrome, pits, etc. $10 $8 $7 SOLD before shipping.
S-O:W16: (4) XS stubby box wrenches, underlined: XS1012, XS-1416, XS1820, XS2024, very good condition, just a bit of chrome rubbing on a couple of them. $25 SOLD shipped.
S-O:W17: VO1618, underlined logo, excellent condition, looks barely used. $8 $7 before shipping.

S-O:W18: (4) of the R-series 0-degree ratcheting wrenches: R2428C new logo, new and unused; underlined-logo, old and old-looking "No. 75" 9/16"|1/2"; R-1214 underlined logo good but with a couple of lines scribed in it; and R810S with engravings and tape residue. $20 $18 SOLD shipped.
S-O:W19: RXH1618S, underlined-logo flare. Chrome loss, engraved with "JB", good working condition. $7 $6 SOLD before shipping.
S-O:W20: B1461 brake spoon, underlined logo, in great shape, has a grind mark on the side. $8 $7 before shipping.


**Taking out the money included for shipping in the ones where the price is "shipped", these Snap On wrenches add up to $269. So, if someone wants, take all these Snap-On wrenches, S-O:W1 thru S-O:W20 for $180 shipped.....or Best Offer. There are 49 total wrenches...8 or 9 of 'em pristine and unused!



Part 3 - Big Wrenches - Armstrong & S-K - all Made in USA. $70 $65 shipped. Pics: http://s1176.photobucket.com/albums/x325/shimrod69/Tools/Big Wrenches/

- Armstrong Armaloy 1 7/16 by 21" long.
- Armstrong Armaloy 1 3/8 by 20" long.
- Armstrong Armaloy 1 1/4 by 18" long.
- S-K C-36 1 1/8 by 16" long.
- S-K C-34 1 1/16 by 15" long. This one is rough-looking, with grinds and other ugliness, but perfectly functional.

The other 4 are in excellent shape. $70 $65 shipped for the 5 big wrenches.





---------------------------------

< more below in Post #2 >​

 

[shimrod]

Re: the Rest....plus a Snap On bonus for reading to the end.

Part 4 - K-D and Other Auto-type tools - Pics: http://s1176.photobucket.com/albums/x325/shimrod69/Tools/Various Groupings/

**Take all the K-D and other auto tools in sections A and B for $100 shipped. Includes everything except what sold already, #1-d and the unnumbered freeze plug tool. These prices total just under $200, and believe me, I figured the prices by finding the cheapest (used) one in existence and going well below that!

A. Auto Stuff - Pic 1

1-a: K-D serpentine belt tool, with everything: the bars, 3 crowfoots, 3 sockets. The male piece on the long bar is a bit twisted, I can't tell if they make it like that or not, but it looks fine. $10 $9.

1-b: K-D / US Gauge pressure gauge, with hose and quick coupling marked "1/4 IM". $10 $9.

1-c: Cal-Van "22" ball joint separator / pickle fork, 11/16" or 18mm between the fork tines. $10 $9.

1-d: K-D 2825 E-Z Roll-In Seal Puller: this one has seen better days, it's bent and hammered. May still function or be able to be made to function, figured I'd put it out there. $10 $9 SOLD

1-e: K-D oil filter wrenches, (4). Models: 192, 2159, and 2x 190. Covers small to big, or big to small. $15 $12 for the group.

1-f: Craftsman oil filter wrenches, (3). 2 labelled with a "3", and another marked with a "2". $10 $9 for the three.

1-g: K-D 912 valve spring compressor, (2). $10 $9 for both.

1-h: Craftsman seal puller: $5 $4.

1-i: K-D 424 CV boot clamp tool: $5 $4.

1-j: K-D 2039 Wiper Arm remover tool, may not have its full padding for protection, so you might have to put something on it to protect any damageable surfaces: $8 $7.

1-k: K-D 294 some kind of snap ring pliers, not convertible. $4 $3.

1-l: K-D 135 plug wire pliers, rubber on the end a bit shot. $2.

1-m: Blue Point YA2090 radiator cap remover. $10 $8.

1-n: K-D 2031 exhaust/tailpipe cutter, in decent shape. $15 $13.



B. Auto Stuff - Pic 2

2-a: OTC 1921 locknut socket, 2 1/2", 3/4"-drive. $10 $8 SOLD.

2-b: K-D 3259 Universal Vacuum PVS TVS Valve socket (also O2 sensor). Can be turned with 1/2" ratchet, or 7/8" wrench. $10 $8.

2-c: K-D 2756 HEI spark tester. $5 $4.

2-d: Mile Marker spindle nut sockets: 15001 01 - a 2 1/8" hex and 15002 01, a 4-prong socket. $15 $10 SOLD for both.

2-e: K-D 3458 oil pressure sending unit socket. $3 $2.

2-f: K-D 2790 oil filter socket, 3-inch. $4 $3.

2-g: K-D 2420 clutch aligning set. $10 $9. Closeup: http://i1176.photobucket.com/albums/x325/shimrod69/Tools/Various Groupings/Table2Sub1.jpg

2-h: K-D 3321 fuel line disconnect tool. $8 $6.

2-i: Craftsman 47365 brake piston compressor. $4 $3.

2-j: Nameless bushing driver kit in dirty, greasy case. $15 $12. Closeup: http://i1176.photobucket.com/albums/x325/shimrod69/Tools/Various Groupings/Table2Sub2.jpg

2-k: Craftsman brake adjusting tools, (2). $4 $3 for both.

2-l: K-D 409 radiator temp gauge. $4 $3.

2-m: Brake bleeding wrenches, (3): K-D 291 1/4 and 3/8 large offset; K-D 2149 1/4 and 3/8; K-D 283 90-degree 5/16 and 3/8. That last one has much chrome loss and an engraving, but it'll work. $10 $8 for all 3.

2-n: K-D 2545 Ford rear brake piston tool. $8 $7.

2-O: K-D 3282 Chrysler timing belt tensioning tool. $10 $7.


Part 5 - S-K Mixed Stuff - Pics: http://s1176.photobucket.com/albums/x325/shimrod69/Tools/S-K/

Take the remaining S-K stuff for $45 shipped - everything except the stuff already sold (SK-S12 and -S16).

SK-W1: 88226 - 13/16" combo SuperKrome, nice one. $8 $7.
SK-W2: C-16 - 1/2" combo, ok shape. $2.
SK-W3: 88513 - 13mm combo, plenty of chrome loss. $3 $2.
SK-W4: diamond logo 11mm combo, ok shape. $3 $2.
SK-W5: 8307 - 7mm combo, chrome loss. $1.
SK-W6: 8310 - 10mm combo, chrome loss, pitting. $1.
SK-W7: 8813 - 13 and 14mm flare wrench, nice. $5 $4.
SK-W8: 33520 - stubby double-box, 5/8"|11/16", ok. $2.
SK-W9: 0-2224 - S-K Wayne double-open, 11/16"|3/4", a bit beat-up. $2.
SK-10: 7208 - slipjoint pliers, definitely used. $4 $3.
SK-S11: 1/2"-drive impacts: 46160 3" extension; 46124 3/4" socket; 34268 18mm deep; 34224 3/4" deep. $12 $10.
SK-S12: 3/8"-drive: 45161 6" extension; (3) 45159 1" extensions. $7 SOLD with SK-S16 for $20 shipped.
SK-S13: 1/2"-drive: SK-Wayne 40120 5/8" 12pt; 40816 1/2" deep 12pt, chrome loss; 40826 13/16" deep 12pt. $7 $5.
SK-S14: 3/8"-drive: 40618 9/16" swivel 6pt, really floppy; (2) 4490 13/16" deep swivel spark plug sockets. $8 $6 EACH for spark plug socket, first one gone gets the floppy swivel, too.
SK-S15: 3/8"-drive: 311 11mm 6pt; 319 19mm 6pt; diamond logo 1/2" 12pt; 40420 5/8" deep 6pt. $7 $6.
SK-S16: 3/8"-drive: (2) diamond logo adapters - 1/4" to 3/8" and 3/8" to 1/2"; 4420 5/8" plug socket; 4421 5/8" extra-long plug-type socket; 4426 13/16" plug socket; 4488 1-1/16" plug-type socket. $15. SOLD with SK-S12 for $20 shipped.
SK-S17: 1/4"-drive: 40954 driver handle; (2) 40962 6" extensions; 40961 2" extension; 41706 10mm deep 6pt.; plus 3/8"-drive: 45545 T45 socket; 45431 7mm hex socket. $10 $8. SOLD

Take the remaining S-K stuff for $45 shipped - everything except the stuff already sold (SK-S12 and -S16).

Part 6 - Snap On Ratchets - not all Snap On goes at the Top..... Pics: http://s1176.photobucket.com/albums/x325/shimrod69/Tools/Snap On/Ratchets/

Top: SL80 - Excellent+ - just some drawer scratches, shiny everywhere else, barely used. $80 SOLD shipped.
Then from left to right:
- F80's - both have plenty of scratches but that's all, mainly excellent. $50 $45 shipped each. Both SOLD
- F749 roundhead - would be Excellent+ except for 2 ugly grind marks, not deep but long. $22 shipped. SOLD.
- F830, in good shape, denting on handle, and wear on side of head. $30 $25 SOLD shipped.
- F936's (2) - 1 is very good, the other a little better. $35 shipped each. BOTH SOLD

All the above ratchets, the Dual 80's as well as the older ones, work perfectly mechanically. No disturbing skips or grindy-sounds or failure to engage on reverse. Rebuilds for these ratchets are still in the far future.

< continued below in Post #3 >​

 

[shimrod]

Let's try this one again - to the top.
Price drops next bump.

< Post edited to add for sale items >

Craftsman lots SOLD

Part 2 - Craftsman Lots - Let's try: Take all the Craftsman socket lots, A, B, and C, for $100 shipped! Based on ebay results (yes, of stuff that actually sold!) that's really good...

A. Craftsman 1/2"-drive Socket Lot, 45 pieces - $50 $45 shipped. Pics: http://s1176.photobucket.com/albums/x325/shimrod69/Tools/Craftsman/Sockets/Half-Inch Drive/

Description of 1/2"-drive Lot:
USA:
- 10x SAE impact: 7/16" to 1"
- 10x mm 12-point: 10 to 18 plus 11mm 6-point for 11 total.
- 3x metric, they don't say impact, so probably just industrial finish: 18, 24, 27mm.
- 9x SAE deep 12-point: 1/2" to 1" plus a 1-1/8" 6-point, plus 5 extras: 9/16, 3/4, 13/16 6-point plug-type, 7/8, and 1", so 15 total.
- 2 2" extensions
- 2 universals, 1 is loose
- 43797 ratchet with thumbwheel.

Taiwan:
- universal
- 6" extension

---------------------------

B. Craftsman 3/8"-drive Socket Lot, 114 pieces - $80 $70 shipped (has swivels...). Pics: http://s1176.photobucket.com/albums/x325/shimrod69/Tools/Craftsman/Sockets/Three-Eighths Inch/

Description of 3/8"-drive lot:
USA:
- Flex ratchet - VVX-44815
- Speeder - 4427
- Set of 3 quick-release extensions: 3, 6, 10 inch
- 5x 3-inch extensions.
- 6-inch extension.
- 2x 10-inch extensions (plus another with no COO)
- swivel
- 8x SAE deep 12-pt: 3/8 to 13/16, plus xtra 5/8, for 9 total.
- 9x SAE deep 6-pt: 3/8 to 7/8, plus xtra 7/16 and 9/16; plus 3 plug sockets: a 13/16 and 2x 5/8; 14 in total.
- 8x metric deep 6-pt: 10-18mm(no 16) plus xtra 12 and 15mm, for 10 total.
- 7x metric 6-pt: 10,12,13,14,15,17,19; plus xtra 10 and 2x 15mm, for 10 total.
- 8x metric 12-pt: 8,9,10,11,14,15,16,19.
- 7x SAE swivel 6-pt: 3/8 thru 3/4; plus xtra 3/4, plus a 12-pt. 3/8 for 9 total.
- 6x metric hex: 4,5,6,7,8,10mm
- 11x hex, mostly doubled: 2x 5/32; 2x 3/16; 2x 7/32; 2x 1/4; 2x 5/16 (1 is long); 3/8.

Taiwan:
- 8x SAE 6-pt unchromed: 1/4 to 11/16, plus 6 extra MadeinUSA: 5/16, 3/8, 2x 1/2, 5/8, 3/4; total of 14.
- universal, unchromed.

No COO present:
- stubby flex w/ thumbwheel - 4378
- 6x driver sockets: 3 flat and 3 phillips, no repeated sizes.

---------------------------

C. Craftsman 1/4"-drive Socket Lot, 47 pieces - $30 $27 shipped. Pics: http://s1176.photobucket.com/albums/x325/shimrod69/Tools/Craftsman/Sockets/Quarter-Inch Drive/

Description of 1/4"-drive lot:
USA:
- 2x quick-release extensions: 6" and 10", 3" is missing from pouch.
- 2x universals: 1 is OK, the other is quite loose.
- 1" extension.
- 3x 6" extensions.
- 9x SAE deep 6-pt: 3/16 to 1/2, plus xtra 1/4 and 5/16: 11 total.
- 9x SAE 6-pt: 3/16 to 1/2 [Note: 5/16 is not Craftsman, left in just to complete the set, brandless Taiwan socket]; plus xtra 7/16 and 1/2 and a 12-pt. 7/16: total of 11 not counting the fill-in one.
- 9x metric 6-pt: 4 to 12mm, plus xtra 11mm, for 10 total.
- 2x metric deep 6-pt: 11 and 12mm.
- 3x SAE hex: 5/32, 3/16, 7/32.

No COO present:
- ratchet VK-44807
- 4" flexible extension.

The End​

 

[shimrod]

Bumpage with price drops of 5 to 20 percent! ( on stuff over 2 dollars ).

 

[shimrod]

Bump with:

- Snap On sockets added.
- Whole-lot prices for S-K stuff, Craftsman lots, and auto tools.

 

[shimrod]

Price drops on Snap On sockets bump.

 

[shimrod]

Re-bump.