Mickey O
Well-known member
- Location
- West of Chicago
- Price
- various
Prices do not include shipping. I have flat rate and regional boxes, send a PM with your zip code for shipping price. PayPal unless I've dealt with you before. Please be patient I'm really busy but I ship very quickly.
1. Vintage Snap-On No. 71A 1/2" Drive, some wear but real nice ratchet - $34
2. Gray Tools Canada 8797 1/2" drive, tool box rub - $27
3. Duro Chrome 4436A 3/8" drive flex head, nice, not floppy - $28
4. Bonney T702K 3/8" drive, good shape, some marks on selector and tool box rub - $12
5. Litton New Britain Generic 3/8" drive, very nice - $22
6. Indestro Super 2789 sealed ratchet 3/8" drive, works good, some scratches on head - $14
7. Cornwell JR2 3/8" drive, works good, some finish loss - $14
8. Britools England E74/40T 1/2" drive, handle is not perfect, not bad, real nice ratchet - $34
9. S-K Tools 42475 Tuff 1 1/2" drive - little toobox rub, nice shape, works great - $32
10. S-K Tools 45875 Tuff 1 3/8" drive long bent handle flex head, little toobox rub, nice shape, works great - $34
11. S-K Tools 45775 Tuff 1 3/8" drive long handle flex head, little toobox rub, nice shape, works great - $32
12. S-K Tools 43175 Tuff 1 3/8" drive long handle, little toobox rub, nice shape, works great - $29
13. Craft (S-K Tools) 45170 Ratchet, some chrome loss, works fine - $14
Snap-On Speeder Ratchet Monstrosity, looks to be home made, needs a rebuild kit, diamond in the rough - $12
NOS Diamond Pliers - $22 each
Assenmacher Specialty Tools (AST) TOY 200 A/C Clamp Remover for removing special air condition line clamps. - $14
Fits both Toyota AC Clamps, used on high and low pressure lines. Applicable to 1998 and newer Toyota models
New MAC Tools CT7646 Ford Clutch Coupling Tool. $9
Works on manual transmissions with hydraulic clutches found on 1988 to current light-duty trucks, Bronco II's, Rangers and Explorers, and 1989 to current Thunderbirds and Mercury Cougars.
Disconnects hydraulic clutch line from clutch slave cylinder, Won't damage the clutch line or coupling. Wedge shaped design allows easy removal of clutch line without damaging the clutch line, coupling, or slave cylinder; no need to pry the coupler apart.
Stanley No. 10 10" adjustable - $8
New Bahco 6" adjustable - $11
Ridgid 6" pipe wrench - $7
Heyco No. 29 cord grip pliers (no spring, I always remove them, pain in the ***) - $20
( info here: http://www.heyco.com/strain_relief_...Assembly-Tools§ion=Strain_Relief_Bushings )
Bosch OSC312F-3 Oscillating Tool Segmented Saw Blades - New 3 Pack - Made in Switzerland - $20
Direct interface with Bosch, Skil, Fein 636, Ridgid & Milwaukee oscillating tools. Will fit the following oscillating tools; Fein 250, Rockwell, Craftsman, Masterforce, Dremel, Chicago Electric, Mastercraft, Tooshop & Performax with an adapter (adapter not included in auction).
Pair of RoboGrip Pliers, 6 and 9 inch - $17
Refrigeration ratchets, all Duro/Indestro, top one is marked Imperial - $10 each
Indestro 3/8" socket set with open head ratchet, 2.5" extension, breaker bar, 3/8 - 34 sockets (3/8 is 6 point, the rest are 12 point), nice shape, set has red paint ove-spray that will clean off) - $21
Proto Professional 3/8" drive 6 point Chrysler MTSC Award deep sockets, 3/8, 1/2, 9/16, 5/8, 11/16, 3/4 & 13/16 - $30
Schick 10" Aluminum pipe wrench - $15
Wright 3443 3/8" drive t-bar - $8
Proto Professional 3/8" drive t-bar - $8
Gedore German 3/8 drive metric sockets; 19, 18, 17, 15, 14, (12 points) 8 (6 point), 5 (1/4" drive 6 point) $25
Wright tools socket lot - $20
chrome 3/8 drive (front row) 6 point: 3/8, 7/16, 1/2 & 9/16, 12 point: 5/8, 11/16, 3/4, 7/8
back row: 3/4" x 3/8 drive deep 6 point, 1/4 drive x 5/16" & 1/2" 6 point, 3/8 drive x 3/4" 12 point swivel, 6 point impact deep; 9/16", 5/8" & 3/4"
Ridgid 1/8" - 2" portable clamp on pipe vise, these things are great (I have another 2) - $50
1. Vintage Snap-On No. 71A 1/2" Drive, some wear but real nice ratchet - $34
2. Gray Tools Canada 8797 1/2" drive, tool box rub - $27
3. Duro Chrome 4436A 3/8" drive flex head, nice, not floppy - $28
4. Bonney T702K 3/8" drive, good shape, some marks on selector and tool box rub - $12
5. Litton New Britain Generic 3/8" drive, very nice - $22
6. Indestro Super 2789 sealed ratchet 3/8" drive, works good, some scratches on head - $14
7. Cornwell JR2 3/8" drive, works good, some finish loss - $14
8. Britools England E74/40T 1/2" drive, handle is not perfect, not bad, real nice ratchet - $34
9. S-K Tools 42475 Tuff 1 1/2" drive - little toobox rub, nice shape, works great - $32
10. S-K Tools 45875 Tuff 1 3/8" drive long bent handle flex head, little toobox rub, nice shape, works great - $34
11. S-K Tools 45775 Tuff 1 3/8" drive long handle flex head, little toobox rub, nice shape, works great - $32
12. S-K Tools 43175 Tuff 1 3/8" drive long handle, little toobox rub, nice shape, works great - $29
13. Craft (S-K Tools) 45170 Ratchet, some chrome loss, works fine - $14
Snap-On Speeder Ratchet Monstrosity, looks to be home made, needs a rebuild kit, diamond in the rough - $12
NOS Diamond Pliers - $22 each
Assenmacher Specialty Tools (AST) TOY 200 A/C Clamp Remover for removing special air condition line clamps. - $14
Fits both Toyota AC Clamps, used on high and low pressure lines. Applicable to 1998 and newer Toyota models
New MAC Tools CT7646 Ford Clutch Coupling Tool. $9
Works on manual transmissions with hydraulic clutches found on 1988 to current light-duty trucks, Bronco II's, Rangers and Explorers, and 1989 to current Thunderbirds and Mercury Cougars.
Disconnects hydraulic clutch line from clutch slave cylinder, Won't damage the clutch line or coupling. Wedge shaped design allows easy removal of clutch line without damaging the clutch line, coupling, or slave cylinder; no need to pry the coupler apart.
Stanley No. 10 10" adjustable - $8
New Bahco 6" adjustable - $11
Ridgid 6" pipe wrench - $7
Heyco No. 29 cord grip pliers (no spring, I always remove them, pain in the ***) - $20
( info here: http://www.heyco.com/strain_relief_...Assembly-Tools§ion=Strain_Relief_Bushings )
Bosch OSC312F-3 Oscillating Tool Segmented Saw Blades - New 3 Pack - Made in Switzerland - $20
Direct interface with Bosch, Skil, Fein 636, Ridgid & Milwaukee oscillating tools. Will fit the following oscillating tools; Fein 250, Rockwell, Craftsman, Masterforce, Dremel, Chicago Electric, Mastercraft, Tooshop & Performax with an adapter (adapter not included in auction).
Pair of RoboGrip Pliers, 6 and 9 inch - $17
Refrigeration ratchets, all Duro/Indestro, top one is marked Imperial - $10 each
Indestro 3/8" socket set with open head ratchet, 2.5" extension, breaker bar, 3/8 - 34 sockets (3/8 is 6 point, the rest are 12 point), nice shape, set has red paint ove-spray that will clean off) - $21
Proto Professional 3/8" drive 6 point Chrysler MTSC Award deep sockets, 3/8, 1/2, 9/16, 5/8, 11/16, 3/4 & 13/16 - $30
Schick 10" Aluminum pipe wrench - $15
Wright 3443 3/8" drive t-bar - $8
Proto Professional 3/8" drive t-bar - $8
Gedore German 3/8 drive metric sockets; 19, 18, 17, 15, 14, (12 points) 8 (6 point), 5 (1/4" drive 6 point) $25
Wright tools socket lot - $20
chrome 3/8 drive (front row) 6 point: 3/8, 7/16, 1/2 & 9/16, 12 point: 5/8, 11/16, 3/4, 7/8
back row: 3/4" x 3/8 drive deep 6 point, 1/4 drive x 5/16" & 1/2" 6 point, 3/8 drive x 3/4" 12 point swivel, 6 point impact deep; 9/16", 5/8" & 3/4"
Ridgid 1/8" - 2" portable clamp on pipe vise, these things are great (I have another 2) - $50