Some tool box cleaning... Also looking for a 22mm lug socket..

[48548]

I did some cleaning and I realized I need two 22mm lug sockets and does any one have some ideas where to get them cheap? Coo doesn't matter as they are to stay in the vehicles.. The woman's car and my truck both use a 22MM lug socket and I only have one in my box and it is a toptul and was expensive so I don't really want to go down that route for two more... I need a bigger box but can't do that until we sell that place and move and in PHX with the housing market that means a long long time.... But here were some of the worst drawers... Most stuff I have moved into boxes that I don't use for now...

 

[48548]

The impact sockets 1/4 and 1/4(loose ones from ebay) I just got. The 1/4 set I got from my snap on guy... I also got the 3/8 mm and 1/4mm chrome snappy's off of here along with the new speeder I was looking for... Still waiting on another 1/2 ratchet and extensions I just got off of here.

 

[NJHandyGuy]

God i love tool ****

 

[48548]

God i love tool ****

The tool **** would be if I take pics of all of the red cases opened

 

[Bull]

I hope your insurance policy includes coverage for all that chrome, man!

 

[48548]

Probably not, hehehe. I have been meaning to follow up on that. If something happened to them I would have to kill the person who stole them or kill myself...

 

[Bull]

Yeah, better play it safe. Guys on here always say to photograph and list everything you have, and make sure your policy covers all the stuff. It looks like a lot, a lot of dough right there, and that's probably not even close to all of it!

Nice to see you went through all that trouble cleaning to make room for the little Plomb headed your way, though

 

[NJHandyGuy]

well whst are you waiting for open them

 

[48548]

Yeah, better play it safe. Guys on here always say to photograph and list everything you have, and make sure your policy covers all the stuff. It looks like a lot, a lot of dough right there, and that's probably not even close to all of it!

Nice to see you went through all that trouble cleaning to make room for the little Plomb headed your way, though

That is correct!!!!

Here is some more ****...

 

[bchee]

You line the lids of those boxes? LOL that cracks me up!!

I didn't know they sold lid liner.

 

[e-tek]

I love the tool **** as much as the next guy - but I never could figure why anyone would have (esp. if they paid for them), more than a couple same-size ratchets, cresent wrenches,etc, etc.....

Anyone have a good reason?

 

[48548]

I love the tool **** as much as the next guy - but I never could figure why anyone would have (esp. if they paid for them), more than a couple same-size ratchets, cresent wrenches,etc, etc.....

Anyone have a good reason?

I have a reason not good, but a reason... I have a problem!!!!!!

 

[NJHandyGuy]

etek i agree with you i only have like 10 ratchets total

 

[48548]

Does this help with the problem, pics of my top box. Also no two ratchets in this box are the same as the one next to it.

 

[sparky7]

Well i can see having two of every type of ratchet in all drive sizes, flex head, low pro, different handle lengths. Just so you can have the same size ratchet on the bolt head and the nut at the same time. This is also a good reason why having both 6 point and 12 point is a good idea.

Beyond that its just collecting and having spares.

 

[Bull]

How many old stamps does someone need? How many old clocks? Baseball cards? Cars? Comic books? Oil cans? Women?

Men like to chase after what they desire and, once obtaining it, start the chase again.

 

[48548]

How many old stamps does someone need? How many old clocks? Baseball cards? Cars? Comic books? Oil cans? Women?

Men like to chase after what they desire and, once obtaining it, start the chase again.

I like the woman comment... I wish I could have more than one... But the fact that I have one that puts up with my tool problem is good enough.

 

[Bull]

I like the woman comment... I wish I could have more than one... But the fact that I have one that puts up with my tool problem is good enough.

Yeah, I settled down too. But, in our minds and with our eyes, we are still chasing women. That's only normal.

 

[TheDukeofDeere]

****, this post makes me wanna buy more tools.

Thanks!

 

[davidj]

get some impact sockets from hf and throw the 22mm in the car! they also started selling individual sockets. im not sure on the size of them though, maybe they have a 22.

 

[NY Old Guy]

what a nice collection

 

[poprockcrusher]

7/8=22mm

 

[48548]

7/8=22mm

That will help, I just ended up getting a cheap 22mm chrome socket from HF and the 25inch breaker bar to leave in my truck to use on the lugs... It will be good enough for the odd chance I need to use it.

 

[mrholeshot]

oooooooooooooohhhhhhhhhhhh

 

[davesnothere]

 

[occ3377]

those are some cool boxes your socket sets and stuff are in! can those still be bought?

 

[48548]

those are some cool boxes your socket sets and stuff are in! can those still be bought?

Yes all of the ones without the snapon logo I just bought... I have the part numbers and prices if you want them...

 

[TheDukeofDeere]

What's the sizes of those boxes? I didn't even notice they weren't badged Snap On.

I might be interested in some of those if you could get the sizes fairly easily.

 

[occ3377]

yea same here I'm interested in them too

 

[48548]

The new boxes don't have the snapon logo anymore... But the two I got are kra206d-smaller one and the kra142a.

http://buy1.snapon.com/catalog/tools.asp?tool=&Group_ID=51&store=snapon-store

KRA206D-Box, Metal, 8 1/8" x 3 1/16" x 1 1/4" (For 1/2" drive universals)
KRA142A- Can't find the size....

 

[Thumper]

.........Damn......