Source for plastic cases and drill indexes.

[xela456]

I'm looking for a source to purchase the types of plastic cases that drill bits and sawzall blades come in. The type that slide into each other.
I'm also looking for a source for empty drill indexes I like the octagonal ones like the. It cooler and the norsemans. They are sold under several brands so there must be a way to get your hands on one empty! Any help would be greatly appreciated!!!

 

[PhysicsDude]

Huot is the leading manufacturer of drill indexes. If you just do a search (in google, amazon, ebay, etc.) for "Huot Index" you'll find a bunch of them. The circular type one you asked about that Norseman, and other drill bits often come in is called the "Bit Buddy".

https://www.amazon.com/dp/B00208S4MG/?tag=atomicindus08-20

I'm not quite sure what you're describing with the plastic cases that bits and sawzall blades come in? Are you talking about something similar to these?

https://www.amazon.com/dp/B000CNO72W/?tag=atomicindus08-20

 

[Toolfool]

Or this type ? https://www.amazon.com/dp/B007FUMZW4/?tag=atomicindus08-20

 

[Steiger9]

McMaster is the only place I've found for those sliding storage tubes.

https://www.mcmaster.com/shipping-tubes

 

[antman213]

I've been using old RX pill bottles. The long ones are perfect for most drills. I like to put all my Male extractors in one also

Sent from my SM-G965U using The Garage Journal mobile app

 

[James-W]

I have a Milwaukee Sawzall and it comes with a metal case. I picked up some PVC pipe at the local ACE hardware store along with two end caps. I cut the pipe to the length I needed for the spare blades I had. Then I glued one end cap to the pipe and the other end cap I just slid over the pipe. With the blades inside the PVC pipe and both end caps on, the blades are protected and I know exactly where they are. Was cheap to make and it works great.

 

[ChrisLS8]

I just use the cases the blades come with