Specs for Impact gun

[nbpt100]

I have a Universal tool 1/2 drive pneumatic impact gun. Made in Japan. I am not sure how old it is. My guess is 20 +. The model number is UT-2210.

I can't seem to find a manual on line or much at all from the manufacturers.

I am trying to find out its specifications. i.e. torque, air requirements etc.

Can anyone help?
Thanks

 

[KnurledNut]

See if this gets ya close:

http://www.florida-pneumatic.com/media/attachment/file/UT2110R-1-Manual.pdf

 

[nbpt100]

See if this gets ya close:

http://www.florida-pneumatic.com/media/attachment/file/UT2110R-1-Manual.pdf

Thanks. It gave me some ideas and i found this which is closer.

http://www.airsupplies.co.uk/images/Universal-Air-Tools.pdf

 

[cheesehead2]

Checked my spec. charts. Tool is the same as the old CP 732 and the Central pneumatic 1/2 inch

250 lbs max. 3/8 air line 125 psi.

I test repaired tools on a Skidmore Mod. ML I/2 tools tested on 5/8 bolt.

Hope this helps

 

[cowades206]

this is three years old so maybe you will never look here again, but I have a manual for the UT-2210 from 1986. It is scanned so I could get it to you electronically.

 

[Hazcat]

this is three years old so maybe you will never look here again, but I have a manual for the UT-2210 from 1986. It is scanned so I could get it to you electronically.

What perfect timing! I have just obtained a pair of UT-2210s of that vintage!
I'll PM you with email details.
Thanks!!!