To avoid these ads, REGISTER NOW!

spray foam to ventilate or not?

crewchief437

Well-known member
Joined
Jan 20, 2014
Messages
155
Location
Poplarville, MS
i just got my pole barn sprayed. if you have spray foam and an insulated space did you put a vent in or not. and if not have you had any problems? i talked to my AC guy and he wasnt totally sure if i would need a vent or not.
 
To avoid these ads, REGISTER NOW!
OP
C

crewchief437

Well-known member
Joined
Jan 20, 2014
Messages
155
Location
Poplarville, MS
A little from my roll up door. I'm more worried about condensation. But the unit should eliminate most moisture right? I'm in the deep south btw. Lots of humidity.
 
To avoid these ads, REGISTER NOW!

Beemer533

Well-known member
Joined
May 9, 2014
Messages
2,057
Location
Syracuse, NY
What kind of spray foam and how thick? Were all the walls and the roof sprayed?

For ventilation, are you referring to something like a soffit/Ridge vent?
 

volleyball

Well-known member
Joined
Aug 29, 2011
Messages
4,127
Location
NY, not NYC
Did you need to vent it before? If you did then you still do. If you didn't was it because the place was fully vented due to holes?
 
OP
C

crewchief437

Well-known member
Joined
Jan 20, 2014
Messages
155
Location
Poplarville, MS
2-3" closed cell on the walls 5-6"open cell on the ceiling. The building was made with a ridge vent on the roof. this was covered from the inside with foam. I was looking at maybe putting in a small louver or something like that. if im going to weld in the building should i vent other than opening the doors?
 
To avoid these ads, REGISTER NOW!
Top Bottom