Square rubber jack pad

[BHH]

I want to make or buy a square rubber jack pad for the 2 Ton Hein Werner floor jack.

I have seen a few pictures of people that have come up with their own solutions. I want to either find one that fits perfectly or I will have to make one, which would mean making a mould of the saddle and then learning how to make things out of hard rubber haha. I have tried a hockey puck but I don't like how there is a lot of room for it to move around.

I noticed one Member ImportTuner has done this and it looks pretty decent but I would like to have the metal completely covered or as much as possible.

So has anyone else tried to do some sort of rubber saddle cover / insert with a square jack saddle?

 

[lilredex]

Like this?

http://www.princessauto.com/pal/product/1090014/Floor-Jacks/Floor-Jack-Saddle

 

[BHH]

Like this?

http://www.princessauto.com/pal/product/1090014/Floor-Jacks/Floor-Jack-Saddle

That's a saddle replacement. I am looking more for something I can put on over the saddle that can be removed.

 

[Davefr]

Buy a chunk of this. It also makes excellent anti-vibration pads for putting under compressors, grinders, drill presses, etc.

http://www1.mscdirect.com/cgi/NNSRI...re=ItemDetail-_-ResultListing-_-SearchResults

 

[lilredex]

Correct.......you remove your's and put this one on. And, put the original back on when the "soft touch" is no longer needed. It lifts on and lifts off, and swivels.

 

[nutjob]

Looking for this?

http://protechproducts.com/index.php?route=product/category&path=35_38

Kevin

 

[BHH]

Looking for this?

http://protechproducts.com/index.php?route=product/category&path=35_38

Kevin

Awesome, not I just have to see if one will fit.

 

[BHH]

Looking for this?

http://protechproducts.com/index.php?route=product/category&path=35_38

Kevin

Looks like they don't have a match. The saddle diameter is 6-3/4"

 

[thesilverone]

http://www.dsuban.com/American-Forge-200TK42-Replacement-Saddle-Pad-for-200T-p11377.html

it's the pad on this pic. Slips right over

 

[Domochu]

Do you know what saddle size this pad fits?
My saddle is 4 1/2" diameter

http://www.dsuban.com/American-Forge-200TK42-Replacement-Saddle-Pad-for-200T-p11377.html

it's the pad on this pic. Slips right over

 

[PCO6]

Like this?

http://www.princessauto.com/pal/product/1090014/Floor-Jacks/Floor-Jack-Saddle

I use one of those and it works great.

 

[el tanque prohibido]

Looks like they don't have a match. The saddle diameter is 6-3/4"

Why are they saying the saddle diameter is 6-3/4'' ?

How do have a diameter of a square object?

I'm thinking you should measure the length and width of the square pad and then go back and visit the Protech link.

 

[toolmiser]

My Dad took a chunck of a tire tread and cut it to size and that works nice. Maybe not the prettiest, but if you happen to find a newer tire it would be better.