Stainless-Aluminum galling

[dkop1]

Hi folks....
I was wondering where I might go to find resources on preventing stainless hardware from galling in aluminum threads (hand tightened). Naturally I use anti-seize whenever possible, but i'm looking for things that might make good "alternatives" in a pinch. Until I can clean things off and apply the proper compound.
I just tried blue marine grade grease tonight... I'll bring in some aluminum permatex anti-seize tomorrow from home. but I'd rather find information people have already learned, rather than trying every possible lubricant on my own and learning the hard way.

 

[kerrynzl]

CRC 556 spray

 

[dogdog]

nothing works if it is on exhaust hardware... some people swear that the nickle one works..

https://www.permatex.com/products/l...i-seize/permatex-nickel-anti-seize-lubricant/

 

[Bondo]

Ayuh,...... Form-a-gasket #3 is what I use,.....

 

[PFSard]

Here's one resource

https://www.boltdepot.com/fastener-information/Materials-and-Grades/Thread-galling.aspx