To avoid these ads, REGISTER NOW!

Stainless tools

B

Bielio

Well-known member
Joined
Apr 30, 2013
Messages
148
Location
Of
Going to purchase the Hazet Hinox 1/4" set.
All stainless.

Already own 2 Victorinox swisstools.

Any recommendations for all stainless screwdrivers or pliers? Wrenches?

I'm not looking to spend an arm and a leg but I'm looking for high quality.

Thanks
 
To avoid these ads, REGISTER NOW!
H

hautpot

Well-known member
Joined
May 25, 2015
Messages
824
Location
California
Tone and Steritool are full stainless. Wera or Wiha doesn't have full stainless. Schmitz has some pliers.

I have some Witte stainless hex bits and Used to use Steritool sockets. Both are really high quality, but negatively high priced.
 
A

Alfisti

Well-known member
Joined
Dec 7, 2010
Messages
82
Location
Perth Australia
Beta make some great stainless tools, don't have any myself, but a friend who works on boats and spend most of his days in salt water swears by them.
 
T

theoldwizard1

Well-known member
Joined
Feb 22, 2011
Messages
43,077
Location
SE MI
I would not buy stainless wrenches or sockets larger than about 1/2". Knife "purist" don't like stainless because it is hard to sharpen, although it keeps its edge better than other alloys.

Most stainless alloys are more "brittle" than the typical chrome vanadium or chrome moly alloys that are typically used.
 
OP
B

Bielio

Well-known member
Joined
Apr 30, 2013
Messages
148
Location
Of
Thanks everyone for the suggestions.
I'll go against the grain and say I don't like wera too much because of their chroming and the fact that their laser cut tips scratch fasteners.
Sure they may grip a lot better, but damaging a fastener isn't something I'm interested in.

I thought Hazet heat treated their Hinox line of sockets, etc to be 30% stronger than conventional chrome vanadium sockets?

I checked out steritool.
Looks great, but 150mm pliers for $86.00 is steep (like you mentioned).

I'll check out Schmitz and beta.
 
OP
B

Bielio

Well-known member
Joined
Apr 30, 2013
Messages
148
Location
Of
Schmitz looks great.
I just wish they had larger pairs of pliers.
I might pick up a few pairs of their smaller pliers.
 
P

Packard V8

Well-known member
Joined
Mar 16, 2009
Messages
7,380
Location
Spokane, WA
Boats and salt water I can understand, but specifically what are your operational conditions which necessitate stainless?

jack vines
 
M

M6erfan

Well-known member
Joined
Dec 6, 2014
Messages
10,170
Location
'Merica!
Packard V8 said:
Boats and salt water I can understand, but specifically what are your operational conditions which necessitate stainless?

jack vines
Click to expand...

Lots of other industries use SS hardware, wash-down food/beverage plant equipment for example...
 
OP
B

Bielio

Well-known member
Joined
Apr 30, 2013
Messages
148
Location
Of
Packard V8 said:
specifically what are your operational conditions which necessitate stainless?
Click to expand...


I enjoy using clean tools in a clean environment.
Some times I may require the tools to be washed and sterilized.
Other concerns are rust prevention.
Other occasions require work around food-prep materials.
This is why I also use superLube greases and oils as occasional or rare contact with food is non-toxic.
 
Last edited:
G

Gmonkee

Well-known member
Joined
May 9, 2010
Messages
2,713
Not all stainless is non magnetic so if it's medical like MRI machines you have to be VERY specific on what you bring in. Food services can be less selective.

I have three stainless SOE wrenches each about a foot long with thick hollow tubes as handles. Still haven't figured out the intended purpose.. The''re non-magnetic so it opens possibility to anything. I got them in a horse trade but new it's $$$q
 
T

T45

Well-known member
Joined
Nov 20, 2014
Messages
3,250
you cannot (actualy) sterilize plastic, eg softgrip handle drivers.

Med stuff is all metal as far as I know.

SS toolsteel is magnetic, generally speaking as non mag is poor tool qualities

hazet is good but limited options larger than 1/4 drive

there was a recent thread on stainless, try search for more options/opinions
 
To avoid these ads, REGISTER NOW!
OP
B

Bielio

Well-known member
Joined
Apr 30, 2013
Messages
148
Location
Of
I wouldn't be sterilizing plastics or rubbers.

I've checked the forums.
A lot of threads about boat owners looking for stainless. Vast majority of members responded with "purchase wera"
 
R

rsanter

Well-known member
Joined
Dec 22, 2007
Messages
18,490
Location
visalia ca
Look for used or surplus medical tools. A few years back I bought a medical card from a guy that worked at a hospital. He used to take all the medical tools home that the hospital was getting rid of. Several of them looked and worked just like the non medical version.
I sold a bunch of them off and kept a few. I may have some spare pliers that I could part with.

Bob
 
P

Pantsfall_McFixit

Well-known member
Joined
Oct 8, 2012
Messages
167
I keep a file, tools.txt, here's the section on stainless tools:

Wera - Screwdrivers
Wiha - Screwdrivers
KS Tools - Inox Plus
Aven - Screwdrivers, etc.
Athlet - Screwdrivers, Hex and Torx keys
HaFu - hex keys
Elora - Screwdrivers
Witte - Screwdrivers
Asahi (Japan) - hex keys
Tone (Japan) - various

I have Wera's stainless screwdrivers and hex keys, Wiha stainless drivers, an Elora driver, and an Athlet driver. Wera's hex keys are amazing for a tool polisher like me, however others use them daily and have no complaints. Wiha's stainless drivers are excellent as well. I have not used any of them very much they're so nice, however others say that modern German stainless tool steel is up to daily use.
 
OP
B

Bielio

Well-known member
Joined
Apr 30, 2013
Messages
148
Location
Of
rsanter said:
Look for used or surplus medical tools. A few years back I bought a medical card from a guy that worked at a hospital. He used to take all the medical tools home that the hospital was getting rid of. Several of them looked and worked just like the non medical version.
I sold a bunch of them off and kept a few. I may have some spare pliers that I could part with.

Bob
Click to expand...

This is a good idea also.



Pantsfall_McFixit said:
I keep a file, tools.txt, here's the section on stainless tools:

Wera - Screwdrivers
Wiha - Screwdrivers
KS Tools - Inox Plus
Aven - Screwdrivers, etc.
Athlet - Screwdrivers, Hex and Torx keys
HaFu - hex keys
Elora - Screwdrivers
Witte - Screwdrivers
Asahi (Japan) - hex keys
Tone (Japan) - various

I have Wera's stainless screwdrivers and hex keys, Wiha stainless drivers, an Elora driver, and an Athlet driver. Wera's hex keys are amazing for a tool polisher like me, however others use them daily and have no complaints. Wiha's stainless drivers are excellent as well. I have not used any of them very much they're so nice, however others say that modern German stainless tool steel is up to daily use.
Click to expand...

I'll keep that in mind. Thank you.
 
T

t100

Well-known member
Joined
Sep 3, 2009
Messages
6,101
we use Steriltool, majority of the sockets and T-handles are made of 316L and 17-4 stainless.

Pretty pricey, ~$100 for a single piece of socket.
 
H

hautpot

Well-known member
Joined
May 25, 2015
Messages
824
Location
California
Those Genius Spanners are really nice, but why in the workd would they make Ratcheting with non stainless components???? That literally defeats the purpose of Stainless!
 
L

Leon67

Active member
Joined
Mar 27, 2016
Messages
28
Location
Piraeus, Greece
I have some stainless-inox tools as I work on yachts. Here is the list:
Sockets: 1/4 Hazet, 3/8 Teng Tools. In 1/2 there are sets from Teng and KS Tools
Wrenches: Beta set plus Elora in bigger sizes
Screwdrivers: Beta set plus Wera for some bigger sizes, Witte and Facom. KS has some too.
Hex Keys: Facom for allen, KS for torx (tamperprof)
Pliers: KS, Tone. Aven pliers (locking too) look good but difficult to get here in Europe.
I will try to post a picture later....
 
R

rlitman

Well-known member
Joined
Oct 18, 2010
Messages
24,579
Location
Long Island
Leon67 said:
I have some stainless-inox tools as I work on yachts...
Click to expand...

If corrosion is the only concern, BeCu would be at least as good as Stainless (as as tool metals go, a little superior as well).

I've got a set of Berylco groove joint pliers, and it's nice to know I can put them away wet and not have to worry about rust.
 
OP
B

Bielio

Well-known member
Joined
Apr 30, 2013
Messages
148
Location
Of
Leon67 said:
I have some stainless-inox tools as I work on yachts. Here is the list:
Sockets: 1/4 Hazet, 3/8 Teng Tools. In 1/2 there are sets from Teng and KS Tools
Wrenches: Beta set plus Elora in bigger sizes
Screwdrivers: Beta set plus Wera for some bigger sizes, Witte and Facom. KS has some too.
Hex Keys: Facom for allen, KS for torx (tamperprof)
Pliers: KS, Tone. Aven pliers (locking too) look good but difficult to get here in Europe.
I will try to post a picture later....
Click to expand...

Interesting. thanks.
 
U

ultgar

Well-known member
Joined
Jan 11, 2005
Messages
1,118
Location
New Jersey
As was previously indicated, CuBe and Titanium are alternatives to stainless and used for heavy duty applications.
nonmag-1000.jpg
 
OP
B

Bielio

Well-known member
Joined
Apr 30, 2013
Messages
148
Location
Of
Fcvapor05 said:
That's a marketing statement, and nothing more.
Click to expand...

understood; if that's the case, would you believe the strength is:

greater, less, or equal to conventional Hazet sockets?
If equal, then the only benefit it seems is rust resistance / appearance.
 
You must log in or register to reply here.
To avoid these ads, REGISTER NOW!
Top Bottom