To avoid these ads, REGISTER NOW!

Starting my build! 28X48X16

axemanst3

Member
Joined
Apr 12, 2011
Messages
5
I am a long time lurker, first time poster on GJ. This site has been great in helping me decide exactly what I want to build. The purpose of this barn will be storage/work/man area.

Well first thing first, as the title shows, I have decided to go with a 28'X48'X16' pole building. The poles will be 6X6 20' long, burried 4'. I have decided to go with one industrial 14' tall, 12' wide door with remotes and one standard 68 entry.

So far I have cleared the area where the barn will go and hopefully if I did it right, you should see a picture of it below.

<a href="http://s434.photobucket.com/albums/qq61/axemanst3/?action=view&current=IMG00117-20110430-1026.jpg" target="_blank"><img src="http://i434.photobucket.com/albums/qq61/axemanst3/IMG00117-20110430-1026.jpg" border="0" alt="Photobucket"></a>

My layout for the barn:

The large door will be on the gable end.

With the 16' wall height, I am going to be able to put in a loft in the rear of the building. I am planning on coming out from the back wall 16' and splitting the height difference equally between the floor and ceiling. I am going to use standard joice style hangers and 2X10's covered with plywood for the loft.

The upper level of the loft will serve as a man room and will have a railing that will overlook the rest of the barn. I haven't decided exactly what kind of steps i'm going to use or how I am going to position them. I am leaning towards and L-shape with a small landing about halfway up.

I am a trapper, and do quite a bit of skinning and finishing in my current shed. Underneath of the loft, I will have a doulble stainless sink and a large 8' stainless prep table where I will do most of my trapping stuff.

Also under the loft area, I am planning to store my tractor and larger yard items like the cart, seeder...etc

I am going to put shelving up both sides of the walls prior to the loft and possibly an additional workbench on one side or the other.

I am also going to build a deck off of the back gable end of the building and have a door coming from the loft. I haven't decided on a size for the deck as of right now, I just think it would be cool to have a place to drink a few beers and maybe steam some crabs. I will keep everyone updated on the progress and try to take a lot of pictures.


I have the equipment coming the end of this week to start moving some more dirt.
 
Last edited:
To avoid these ads, REGISTER NOW!

larry_g

Well-known member
Joined
Apr 28, 2007
Messages
16,888
Location
oregon
Re: [B]Starting my build! 28X48X16[/B]

I had/have a building similar to what you describe. Are you planning to use posts in the middle of the building to hold up the second floor? You can see what i did in the new shop in my build thread below. In the old shop I had stairs as you describe in the back corner and they also worked well. I also highly recommend the insulated vapor barrier that I have if your doing a metal skin.

lg
no neat sig line
 
To avoid these ads, REGISTER NOW!
OP
A

axemanst3

Member
Joined
Apr 12, 2011
Messages
5
I am going to use one, maybe two posts for the span between the sidewalls. Does anyone else have a building similar?
 
To avoid these ads, REGISTER NOW!
Top Bottom