davidlee
Well-known member
I am in the process of doing my shop floor with Rust Bullet and a small supply room (9'x12') with Racedeck snaplock carpet.
The shop area is 1300 sqft. I ground the entire area just to be sure I get a good bond. It was necessary to grind about 570 sq ft because it had been painted years ago so while I had the grinder I did the whole thing.
Products on order
11 gal Rust Bullet (I am doing 3 coats)
10 gal clear (2 coats)
220 lbs flake ( I'm doing a full broadcast)
A BIG shout out to Justin Krauss for all his help. I had a few areas with oil issues and he was very patient with all my questions. I'm a little OCD.
When I get finished I will post pictures of the project.
The shop area is 1300 sqft. I ground the entire area just to be sure I get a good bond. It was necessary to grind about 570 sq ft because it had been painted years ago so while I had the grinder I did the whole thing.
Products on order
11 gal Rust Bullet (I am doing 3 coats)
10 gal clear (2 coats)
220 lbs flake ( I'm doing a full broadcast)
A BIG shout out to Justin Krauss for all his help. I had a few areas with oil issues and he was very patient with all my questions. I'm a little OCD.
When I get finished I will post pictures of the project.