BreeStephany
ALLIANCE MEMBER
I am in the process of looking at building a mixed commercial /residential building, half of which I hope to rent out as a commercial / light industrial space and the other half which I want to have split level, with the lower section being divided up into two sections, 1/2 being my private shop space and the other 1/2 being a shared shop space which I plan on renting out to friends. I am hoping to have the upper section be a residential loft space (3 bedroom, 3 bath, office, exercise room with an open concept living room / dining room / kitchen).
I am thinking of either 50x80 or 40x80 depending upon how I can squeeze everything in. Still in the process of laying everything out on paper, but figured I would reach out to everyone on here and get your recommendations on who I should start looking at for steel building manufacturers.
I also want to get any input from people on shop essentials that I should plan for. I am planning on putting in a bathroom on both my private shop space and the shared shop space, but am thinking about leaving the commercial space unfinished / bare dirt floors (build to suit). I want to have central dust collection, air throughout the shop and plenty of electrical (3phase services - 1 service for commercial space, 1 service for shared shop space, 1 service for residential / private shop space), and also divide up natural gas services the same way. I am hoping to have radiant heat in the shop and residential spaces with supplemental forced air heat and air continditioning in the residential space.
Any input would be greatly appreciated.
I am thinking of either 50x80 or 40x80 depending upon how I can squeeze everything in. Still in the process of laying everything out on paper, but figured I would reach out to everyone on here and get your recommendations on who I should start looking at for steel building manufacturers.
I also want to get any input from people on shop essentials that I should plan for. I am planning on putting in a bathroom on both my private shop space and the shared shop space, but am thinking about leaving the commercial space unfinished / bare dirt floors (build to suit). I want to have central dust collection, air throughout the shop and plenty of electrical (3phase services - 1 service for commercial space, 1 service for shared shop space, 1 service for residential / private shop space), and also divide up natural gas services the same way. I am hoping to have radiant heat in the shop and residential spaces with supplemental forced air heat and air continditioning in the residential space.
Any input would be greatly appreciated.