Stihl Kombi Storage Solutions?

[MattN03]

I just picked up a Stihl KM130, pole saw, extension, trimmer, and brush saw. How do others with this system store it? I would like to hang it up when not in use. Pics are always appreciated!

 

[vekster]

I have the same stuff, bought almost 2 years ago.

Store mine, on the bench, on the floor, leaning against the wall, on a chair, etc......

would love a storage place designed to hold it all before something breaks......Subscribed hoping for some ideas!

 

[matt_i]

Pics at home...but I built some horizontal hangers for the Kombi motor and also a FS- series straight shaft line trimmer. There's a V made from angle iron, there's a piece of steel round tube coming out from the wall, and a flat with two holes. Deck screws go thru the holes into the studs.

The chainsaw bar needs some more fixturing, normally it sleeps behind the V-blocks. However I've found bar oil dripping down from the reservoir when it got cocked sideways.

 

[rlitman]

I have two KM-110R motors, and a bunch of accessories.
I took a piece of angle iron, and welded two pairs of 1/2" rods to it. The rods are spaced ever so slightly over 1" apart (the shaft diameter), and angled upwards slightly. It's perfect for hanging them (I'll try to remember to take pics). The attachments, I stand up on the wall under the motors (not really a good solution).

I'd suggest you look at how the dealer hangs theirs from the wall for ideas.

 

[jake00]

Bringing this back up, I have the system as well. I was at the dealer today and they have all the attachments held to the wall in a bracket that "clips" onto the poles

 

[kd3pc]

I use what looks like a guitar hook...it was cheap at the box store and works well.

 

[kbs2244]

I like these for long handled stuff.
Measure down enough for the "head" to clear anything above and the handle goes in the skinny spot.

http://www.ebay.com/itm/Tornado-Lad...285617?hash=item283144d1f1:g:kCAAAOSw7XBY8MeB

 

[sld961]

Bringing this back up, I have the system as well. I was at the dealer today and they have all the attachments held to the wall in a bracket that "clips" onto the poles

I've seen those too at the dealer. I've been meaning to ask if they can sell those brackets.

Sent from my SM-G930V using Tapatalk

 

[rt dak]

I just have mine hanging on various different sizes of vinyl coated hooks screwed into the ceiling.

 

[PelicanPines]

I like these for long handled stuff.
Measure down enough for the "head" to clear anything above and the handle goes in the skinny spot.

http://www.ebay.com/itm/Tornado-Lad...285617?hash=item283144d1f1:g:kCAAAOSw7XBY8MeB

I love these... I had to grind off the spike tab on the back for a few uses... for instance... these have holes that line up perfect on the HF 5 drawer cart legs.

 

[sld961]

I'm gonna ask the dealer how much this is. http://www.ebay.com/itm/401283873732

Sent from my SM-G930V using Tapatalk

 

[jake00]

I might try something like this https://www.amazon.com/dp/B01FDKIRO2/?tag=atomicindus08-20

 

[jake00]

ended up with this
http://www.homedepot.com/p/Everbilt...ed-Tool-Small-Parts-Organizer-17955/202249702

I'm pretty happy with it

 

[sld961]

I called the Stihl dealer today and they said they have the Kombi garage organizer rack in stock for about $20. In gonna pick one up next time I'm up that way.

Sent from my SM-G930V using Tapatalk