Sunex 2645 Metric Impact Set $62.99 Amazon

[methomas70]

Sunex 2645 1/2-Inch Drive Metric Impact Socket Set, 26-Piece

http://www.amazon.com/dp/B002MW9UW8/?tag=atomicindus08-20


camelcamelcamel says it's the lowest price yet.

 

[kneeman]

I like the five larger sizes. The 2569 kit I got last year stops at 30

Sent from my SAMSUNG-SM-G935A using Tapatalk

 

[PureLeaf]

Not a bad price. This went for 57.99 during black friday.

 

[Wes J]

Who has ever used a 25, 26, 29, 31, 34, or 35 mm socket?

I guess if you make it, people will buy it, whether they need it or not.

Like the hex bit sockets that include 9, 11, 13, 15 etc mm sockets. I've never, ever seen a socket head cap screw or set screw that used those sizes. But they make the sockets anyway

 

[lightning02]

Who has ever used a 25, 26, 29, 31, 34, or 35 mm socket?

Alot of people. Heavy equipment type stuff. I use those sizes on my dump trucks.

 

[Wes J]

Alot of people. Heavy equipment type stuff. I use those sizes on my dump trucks.

I highly doubt it. Most likely those are inch sizes that you are trying to use metric sockets on.

I've seen 24, 27, 32, and 36 mm bolt heads. The rest are just "filling the pegs".

33mm is used on truck lug nuts, but 1-5/16 works just as well.

 

[lightning02]

Ok lol

 

[Wes J]

Go find me a 35mm bolt head. I'll wait.

 

[dutchgray]

Go find me a 35mm bolt head. I'll wait.

Its a hub nut size for some Citroën's
I will admit a 1 3/8" is basically the same if you had one.
I have no idea why they can't stick to standard ISO sizes however.

 

[6MocoA]

This is an exceptional set - I picked it up for a little cheaper last time it went on sale but for the price, you'ld have to be a lunatic not get this.

 

[firworks]

Go find me a 35mm bolt head. I'll wait.

I can probably find one at work. I'll look around on Monday.

 

[chrisexv6]

I find the smaller sizes more ironic than the larger.

1/2" drive for a 10mm?

 

[joeysh03]

This is a great set. A friend of mine owed me some money so I had him buy it for me. I think it was $80 shipped at the time. I've need a new 36mm though as I used it to beat a wheel hub out of a spindle on my ram 1500. I'll prolly never need it anyways but it's really not in bad shape just can't get a ratchet on it.

 

[dutchgray]

I find the smaller sizes more ironic than the larger.

1/2" drive for a 10mm?

For when they are rusted, just snap the bolt off.

 

[justtools]

Alot of gm axle nuts are 33,34 and 35mm.

 

[firworks]

Alot of gm axle nuts are 33,34 and 35mm.

Yep, a few weeks back I replaced a half-shaft on a 2002 Aurora and it had a 34mm spindle nut.

 

[brianpgriset]

Dodge front axle nut is 43mm. Super odd size. All it takes is one use of an odd size one from a set like this and it's paid for all the others, so it's totally worth it at this price.

 

[gtlaw]

Wow this is a first. Complaining about a set coming with too many sizes.. Sure many of the sizes don't fit current standards but look at it as future proofing. If I had a complaint it would be about the small sizes I'll never use a 10mm 1/2" drive especially on an impact.
I have this set the smallest I used in 14

 

[dudutzu905]

Go find me a 35mm bolt head. I'll wait.

4x4 toyota tundra and tacoma front axle nut, millions of them...

 

[Wes J]

Alot of gm axle nuts are 33,34 and 35mm.

So buy an 1-3/8. Ever seen a Snap-on 35mm socket?

 

[methomas70]

Go find me a 35mm bolt head. I'll wait.

Who are you, Monte Hall?

 

[Wes J]

Who are you, Monte Hall?

No. I'm the guy who thinks people shouldn't buy a bunch of Chinese **** they'll never use.

 

[methomas70]

Monte, it's from Taiwan.

And it sounds like some of them are using it.

 

[joeysh03]

The other thing I like about this set is the case is strong and doesn't take up too much space in my box. I take the box, impact and ratchet with me so I can use my impact on the larger bolts and use a ratchet and the smaller sockets in smaller bolts. Less trips to the tool box and I don't have so many tools to put away in the end

 

[Wes J]

it's from Taiwan.

Is that a 51st state that I don't know about?

 

[wvrailroader]

Sent from my SM-G900R4 using Tapatalk

 

[flylow7f39]

So buy an 1-3/8. Ever seen a Snap-on 35mm socket?

https://store.snapon.com/Axle-Nut-Sockets-GM-Socket-Metric-Impact-Deep-35-mm-6-Point-P632625.aspx
Socket, Metric, Impact, Deep, 35 mm, 6-Point
Item: SIMM350

Size, mm 35
Brand Snap-on

 

[Richard Cranium]

People on here will fight about any thing.

 

[6MocoA]

Is that a 51st state that I don't know about?

LOL,

Are you just pissed because Sunex makes a product that does the same exact thing as the truck brand products you and Union Mike spend half their paychecks on every month?

Sunex kicks *** for the money. One of the best deals going in the tool world. Anyone that has a hang up about spending hard earned money for a quality product deserves to get bent over by the Snap On man in the back of the **** van, I mean tool truck.

 

[Hojin101]

These look nice..

 

[Wes J]

LOL,

Are you just pissed because Sunex makes a product that does the same exact thing as the truck brand products you and Union Mike spend half their paychecks on every month?

I'm sure it takes off nuts and bolts just fine. But don't tell me it does the same thing. It doesn't support American manufacturing or the US economy.

But that's not even the point. Why pay more money for a bunch of sizes you will never use? I'm sure everyone here will tell me they use a 29mm socket 12 hours a day, but I've never wanted one.

 

[methomas70]

I'm sure it takes off nuts and bolts just fine. But don't tell me it does the same thing. It doesn't support American manufacturing or the US economy.

But that's not even the point. Why pay more money for a bunch of sizes you will never use?

Ok, so the point is NOT the whole support American economy thing, its paying more for sizes you don't need that's got you all chafed, right?

Monte, are you aware that if you go to the Sunex website, they have smaller sets in more popular sizes there?

 

[Wes J]

Buy all the Chinese **** you can.

I'll leave you to it.

 

[organ]

Buy all the Chinese **** you can.

I'll leave you to it.

I'm sure nothing in your house was made in China... **** off.

 

[kneeman]

Who'd a thunk a socket sale could piss off so many people.

Sent from my SAMSUNG-SM-G935A using Tapatalk

 

[gtlaw]

I'm sure nothing in your house was made in China... **** off.

His sunex impact socket sets aren't

 

[kneeman]

^^Yea I know. I meant come to this. Thinking I should have remained silent now.

Sent from my SAMSUNG-SM-G935A using Tapatalk

 

[CNGsaves]

If anyone is ready to throw away their Sunex impacts as they're so "bad" or the "wrong sizes" . . . . then I'll give an address to ship them to !!! . .

Thanks for posting OP . . . can't have too many quality impact sockets. That little Sunex set would still leave lots of pegs open in Hansen socket rail set !!

 

[Cap'nJake]

I almost bought them but went with the gearwrench set instead

 

[T_Roze]

Who has ever used a 25, 26, 29, 31, 34, or 35 mm socket?



I guess if you make it, people will buy it, whether they need it or not.



Like the hex bit sockets that include 9, 11, 13, 15 etc mm sockets. I've never, ever seen a socket head cap screw or set screw that used those sizes. But they make the sockets anyway

9mm hex bit? Ford Escape 08-12 brake caliper slide pins. There is a few of them out there...

I'd buy the set. For that Saturday night, three years down the road, at about 10 pm at night when you find out that you need a oddball socket, and every brick and mortar store is closed. 1 use is use enough.