Above 1200 Sq/FT T-Handles Workshop (The final destination??)

[bj383ss]

Man another great update. Your shop just keeps getting better and better!

Bret

 

[T-handle]

Man another great update. Your shop just keeps getting better and better!

Bret

Thanks Bret I'm happy how it's going in to the right direction

I forgot to post the pictures from the light table when the lights are on. Here's couple photos. it's pretty bright





I updated my photo taking process too. No more shaky pictures I hope.

I ordered a cheap phone holder and some Gopro clips and connected them together. Now I can use the tripod for taking pictures vs handhold. Looks a lot better I think.
There's something happened to the Gopro accessories measurements. The new ones are very tight to insert to the old ones. My old ones are about three years old. Have anyone noticed the same problem?

Anyway here's some pics about the adapters I build.









I take all my pictures with my Samsung S7 and been dreaming about a real camera. Canon EOS 800d or something like that. I have to start saving some money. I'm about 600€ short at the moment

 

[gearhead1960]

T-handle,

I spent the last couple of days reading through your thread. Fabulous skills and builds! Really love the hammer restorations. Have enjoyed every bit of it.

While I don't recognize your new table, the Diazo process was definitely used to copy plans. We used to use one at the Engineering firm I work for. The process became obsolete when large format copiers and plotters came into use with CAD systems.

 

[T-handle]

T-handle,

I spent the last couple of days reading through your thread. Fabulous skills and builds! Really love the hammer restorations. Have enjoyed every bit of it.

While I don't recognize your new table, the Diazo process was definitely used to copy plans. We used to use one at the Engineering firm I work for. The process became obsolete when large format copiers and plotters came into use with CAD systems.

Thanks for stopping by Gearhead1960

Thanks for the information about Diazo process. I've been searching a video about the process but no luck about the earlier exposed light process.

Do you still remember the smell of ammonia from the diazo paper

 

[gearhead1960]

Thanks for stopping by Gearhead1960

Thanks for the information about Diazo process. I've been searching a video about the process but no luck about the earlier exposed light process.

Do you still remember the smell of ammonia from the diazo paper

The machine we had was cooped up in a little 8' x 10' room. The chemicals were quite strong. Was one of the more unpleasant things to do. You would have to take the plan you were copying, lay it over the special copy paper and then feed it into the machine. It was slow and smelly and the copies were not always good.

 

[T-handle]

The machine we had was cooped up in a little 8' x 10' room. The chemicals were quite strong. Was one of the more unpleasant things to do. You would have to take the plan you were copying, lay it over the special copy paper and then feed it into the machine. It was slow and smelly and the copies were not always good.

I can imagine the smell I think I will pass the blueprint test with my table
But my new table is good working surface for cleaner tasks and projects and I can do some tracing if needed

 

[T-handle]

Shop computer update


Finally I managed to get all my bits and pieces together for new computer. I had a budget of 1000€. I decided to go with two displays to add some bat cave factory So the budget ended up to be 1105€

I went thru the net several times and look'd for deals and discount products. I ordered the hardware from three different stores. My coal was to make a pc for editing and multitasking. I'm not interested about gaming but I would like to try my new setup for that too. I think my oldest son will do it for me anyway

Here is the new setup I ended up, watching a ton of Youtube videos and tutorials. I'm not a tech guy by any means.

-Case Fractal design Focus G
-Motherboard MSI B450-A Pro max
-Processor AMD Ryzen 7 2700MHz 8-core
-Memory G.Skill 2x8GB Sniper X DDR4 3200MHz
-Graphics card MSI Geforce GTX 1650 Ventus XS 4G OC
-Storage Samsung EVO 970 500GB M.2 SSD
-Storage 2 Seagate 1TB Barracuda
-Power supply Seasonic 550w Focus GX-550

-Displays Asus 23.6" Full HD 60Hz

I added two 120mm fans on the case, There was two fans ready in the case.
Also bought a mouse and a keyboard.





Best part is the unboxing. I Love the fresh smell of tech and plastic



After reading all the manuals (I actually did it this time) all went together easily. It's just a bolt and click on process.





Several meters of wire is hidden behind the back wall. This is a nice touch designed on these new cases

And believe it or not, it started up from first push of the button I installed the operating system and all the drivers needed. And a live wallpaper program for cool backgrounds



I hid all the cables in the channel I build for electrics in my workbench. Looks pretty clean.



I mounted the second display on the wall. I had to do some reorganizing with the tools. I had to leave a little cap between the displays. The power button is under the display.



I did a "drawer" for the keyboard and mouse. I stole this idea from Bob. Thanks Bob Now the buttons are at the right height for ergonomics. And it's easy to push the stuff under the table if I'm doing some work on the bench.





The displays can be turned any position needed. My command center is beginning to look ready.



Biggest job was to move all my pictures from the old computer. There was a few. My old machine went to my daughter. I emptied it totally and reinstalled the windows. it's working great for ten years old computer.

Workshop PC movie

Thanks for stopping by and have a great Easter It's snowing in here but I'm going to grill something and ignore the weather

Stay safe my friends

 

[bj383ss]

And the level of your shop just went up several more. Fantastic. I love the way you take your photos. Now I need to build a new computer!

Bret

 

[Bob Heine]

Tapio, the new computer looks great, especially the color on the case. You should be able to edit videos at a whole new level with that beast.

 

[matt_i]

T- great job on the new computer. It really looks high-tech! Having a fast processor is a wonderful thing. I elected to go "one step" up and get a Intel Core i7 nothing special just a laptop and its great to be able to stream a Youtube and at the same time play a HD goPro movie from a flash drive and have 2 dozen Chrome windows open without the fan even running

Command Center is indeed an appropriate description!

 

[T-handle]

And the level of your shop just went up several more. Fantastic. I love the way you take your photos. Now I need to build a new computer!

Bret

Thanks for the kind words Bret I'm trying to keep the photos interesting. I try to share my view and mix in some detail photos from low or high angle. I wish I had a decent camera, that's my next goal to save. Still a lot to learn about photographing.
Computer project, definitely I was comparing some ready build computers, Plug in computer with similar specs cost about 250$ to 500$ more versus building it yourself. And it's a lot of fun too

Stay healthy Bret

Tapio, the new computer looks great, especially the color on the case. You should be able to edit videos at a whole new level with that beast.

Thanks Bob Red stuff is fast stuff World is too gray so I try to add some color to it. I was thinking to build my own case but I have so much stuff to do. So I decided to spend the extra 50€ for the case. That's not bad. I was testing some 4K videos and no problem I was thinking to re-edit all my Youtube videos. If i'm not busy with other projects

Thanks for stopping by Bob and stay healthy

T- great job on the new computer. It really looks high-tech! Having a fast processor is a wonderful thing. I elected to go "one step" up and get a Intel Core i7 nothing special just a laptop and its great to be able to stream a Youtube and at the same time play a HD goPro movie from a flash drive and have 2 dozen Chrome windows open without the fan even running

Command Center is indeed an appropriate description!

Thanks Matt_i Yes it's a huge improvement definitely. I'm amazed about the power these things have nowdays. It's truly nice to do things without the blue ring turning in your screen all the time

Thanks for stopping by and stay safe

 

[Unruh]

I really like that Woden vise. I did a quick search for one of those and one of the grinder...no luck on any close. Also your garage is really amazing now. I agree with Bret that it just keeps getting better and better. Can’t wait to see what you do next!

 

[T-handle]

I really like that Woden vise. I did a quick search for one of those and one of the grinder...no luck on any close. Also your garage is really amazing now. I agree with Bret that it just keeps getting better and better. Can’t wait to see what you do next!

Thanks for stopping by Unruh

I think that the woden vise is more common in the UK and Europe. If you want one, Ebay UK maybe a good place to search. Thanks for the kind words, I think I'm ready to proceed in to the machining area.. I have some small things to do still until I can play with the heavy iron


I have spend some quality time with my new computer and it's working great. No blue screens of death or crashing yet.. I edited a small video about the computer build. Damn it's fast compared to the old pc.

Have a look if nothing better to do

Have great day everyone and stay safe

 

[bj383ss]

Just watched. Man I love your shop.

Great video T.

Bret

 

[Matias]

I love the welding table, and how you can use the different "accessories" with it. And the seat. Just plain awesome.

Also, as someone who has done technical drawing on drawing boards, that big a table for drawing would be great!

And last, I suspect you have some nice processing power with that computer. I had to return my house drawings to the building inspector after some modifications I did. I edited them on my 300e tablet/laptop. I must say, it was the first time I wished I had some good processing power and memory I have been considering a stick pc for the garage, now I am not so sure...

Nice video! Spotted some wera screwdrivers, and nice use of the telescopic magnet! Will use that tip for sure when unscrewing metallic pieces where something can fall off.

 

[cortina64]

You have created an amazing Workshop, your attention to detail is superb.
Warren

 

[T-handle]

Just watched. Man I love your shop.

Great video T.

Bret

Thanks Bret!

It's a lot of fun doing these videos but man I've got lot to learn

Stay safe Bret.

I love the welding table, and how you can use the different "accessories" with it. And the seat. Just plain awesome.

Also, as someone who has done technical drawing on drawing boards, that big a table for drawing would be great!

And last, I suspect you have some nice processing power with that computer. I had to return my house drawings to the building inspector after some modifications I did. I edited them on my 300e tablet/laptop. I must say, it was the first time I wished I had some good processing power and memory I have been considering a stick pc for the garage, now I am not so sure...

Nice video! Spotted some wera screwdrivers, and nice use of the telescopic magnet! Will use that tip for sure when unscrewing metallic pieces where something can fall off.

Thanks for stopping by Matias!

I really like how the welding table turn out, it's heavy and sturdy for metal working. I have to do a clamping system. For now I have been using my milling machine holders.

Nice if you picked up some tips from my video. They are not how to do videos. I'm just showing my QST to the people

Stay safe Matias.

You have created an amazing Workshop, your attention to detail is superb.
Warren

Thanks for stopping by Warren

 

[shortykorte]

Your work is superb. I’m glad Bob mentioned your thread.


Shorty Korte
Always remember quality in QST

Sent from my iPhone using Garage Journal

 

[T-handle]

Your work is superb. I’m glad Bob mentioned your thread.


Shorty Korte
Always remember quality in QST

Sent from my iPhone using Garage Journal

Thank You Sir!

I hope Mr Bob said something nice about me I have to go check immediately

 

[T-handle]

I bought a dream of Milwaukee tool lovers I found this from the local craigslist. Turned out that the seller was my neighbors brother, so I got a good half price deal on it. 30€ and he gave me a pile of Milwaukee stickers and some shelving parts too. World is a small place.



It is used as a hardware store display light. I googled these and apparently there's two or more styles of these things. I found this and a more modern straight style with led lights.

Only problem was that it's way too big for my tool wall.. So I modified it a little bit.





I cut a big chunk out of it so it fits under my shelf..



I had to do some re-organizing for the Milwaukee tools.



I sanded and painted it with a rattle can. Not perfect but looks better without the scratches.

I mounted it up and wired the light. It turns on when I turn the tool area lights on.







I re-mounted the tools loosely so I can update my collection when needed.

I also made a small video about this project.

I think it's a nice detail for the workshop

Have a great weekend everybody and stay safe

 

[Bob Heine]

Thank You Sir!

I hope Mr Bob said something nice about me I have to go check immediately

Tapio, we Scandinavians have to stick together.

 

[Bob Heine]

World is a small place.

Small and wonderful! Can't bring myself to give you a YOU **** (ok, maybe I can after all).

 

[T-handle]

Tapio, we Scandinavians have to stick together.

Yes we do

Small and wonderful! Can't bring myself to give you a YOU **** (ok, maybe I can after all).

Hey which one it's going to be? stick together or I ****

Ok. I **** a little bit but my new Milwaukee sign is shining brightly

 

[Jayman17]

T-handle, very nice addition to the workbench. The Milwaukee light makes it look like a store display.

Jay

 

[wasfast]

really awesome sign!

 

[bj383ss]

T that looks amazing as always. What kind of hooks are you using on your pegboard?


Bret

 

[TomGW]

H Singer was the parts and equipment division of the Singer (sewing machine) Corporation and had it’s London head office in Mortimer Street.
Lay Planning is the practice of setting up a cutting schedule of the various sections that make up a garment, so that it makes the most efficient use of the textile/fabric. The plan is initially drawn up at a smaller scale before being scaled up to full size and a separate cutting plan is required for each size of garment, because the fabric width remains constant while the various parts increase for larger garments. I think that your table was used to devise the optimum cutting schedule for patterned fabric, where the various segments had to pick up the relevant pattern on the fabric.

 

[T-handle]

T-handle, very nice addition to the workbench. The Milwaukee light makes it look like a store display.

Jay

Thanks Jay

really awesome sign!

Thanks Wasfast

T that looks amazing as always. What kind of hooks are you using on your pegboard?


Bret

Thanks for stopping in Bret The hooks I use only goes with the same makers pegboard. Those are screwed in to the pegboard with short 4mm screw.

Here is a collection of my hooks.

I have bought them from here Hooks for pegboard
I also made my own hooks for special tools and for small things I have some magnetic hooks.

H Singer was the parts and equipment division of the Singer (sewing machine) Corporation and had it’s London head office in Mortimer Street.
Lay Planning is the practice of setting up a cutting schedule of the various sections that make up a garment, so that it makes the most efficient use of the textile/fabric. The plan is initially drawn up at a smaller scale before being scaled up to full size and a separate cutting plan is required for each size of garment, because the fabric width remains constant while the various parts increase for larger garments. I think that your table was used to devise the optimum cutting schedule for patterned fabric, where the various segments had to pick up the relevant pattern on the fabric.

Thank You TomGW This is very interesting. I have been in the wrong path totally. All this makes perfect sense with a Singer name on the device.

Do you mean something like this?

View media item 103436
Thank you again TomGW! I have to do some investigating now about vintage garment making Do you think that it is also a diazo copying machine for cutting patterns? It would explain the timer on the lights.


Have a great day everybody

 

[mfg0772]

Wow - just found this thread. I love the organization. Someday, I'll get there.

 

[TomGW]

Do you mean something like this?

View media item 103436
Thank you again TomGW! I have to do some investigating now about vintage garment making Do you think that it is also a diazo copying machine for cutting patterns? It would explain the timer on the lights.


Have a great day everybody

Yes, exactly that sort of plan. Each of the garment sections had to be mapped out to match the pattern on the fabric, while being the most efficient use of the material. It would’ve different for each size of garment as the size of the parts would change but the fabric pattern would stay the same.

 

[TomGW]

I don’t think it was a copying machine as it looks like ‘70s era and all copying machines that I would have been familiar with were auto feeding. I’ve no idea what the timer was for, but having spent time working on a light table I would think it a good idea to reduce eye strain.

 

[T-handle]

Wow - just found this thread. I love the organization. Someday, I'll get there.

Thanks for stopping by Mike

Yes, exactly that sort of plan. Each of the garment sections had to be mapped out to match the pattern on the fabric, while being the most efficient use of the material. It would’ve different for each size of garment as the size of the parts would change but the fabric pattern would stay the same.

I don’t think it was a copying machine as it looks like ‘70s era and all copying machines that I would have been familiar with were auto feeding. I’ve no idea what the timer was for, but having spent time working on a light table I would think it a good idea to reduce eye strain.

Thanks TomGW Okay this makes perfect sense. I was thinking that the table is older judging from the slot drive screws. But if the light fixtures is original it would go to the seventies. Thanks a lot for the knowledge

 

[Ronin22]

That turned out awesome! Love how you modified it!

 

[T-handle]

That turned out awesome! Love how you modified it!

Thanks Ronin22



I've been busy with the yard work so not much workshop time. The spring is finally here and the temps go above 10degrees (50f) every day.

I also did a new parking lot to my neighbors for 30 cars. I'm glad that I have my best friend John Deere to help me

I did a small updated shop tour video from the tool area.

I also made a short video from the welding area.

Two areas completed Now it's time to move on to the machining area. It's going to be a hand full cause I have a lot of unfinished machines

Thanks for stopping by and stay healthy

 

[Biff Lungren]

That is so nice, I'm sure it 'feels' good to walk in there!

 

[T-handle]

That is so nice, I'm sure it 'feels' good to walk in there!

Thanks Biff!

It's my "happy" place for sure

 

[thetastelingers]

Can't believe I've missed this thread.

The area you have created is nothing short of a masterpiece.
I've enjoyed looking through the entire thread and hope to see more in the future.

Thanks!

 

[rattle_snake]

Holy smokes, very impressive shop!!

Makes mine look messy..

 

[T-handle]

Can't believe I've missed this thread.

The area you have created is nothing short of a masterpiece.
I've enjoyed looking through the entire thread and hope to see more in the future.

Thanks!

Thanks for stopping by thetastelingers!

My workshop build is slow but the updates are definitely coming

Holy smokes, very impressive shop!!

Makes mine look messy..

Thanks rattle_snake

75% of my shop look's messy too

 

[250]

Nice tour videos.