Tall jack stands

[Long haul]

Hi all,
I am in search for some jack stands in the 34-36" heigt area. I cant seem to find any that will go that tall. Anyone have any suggestions on where to find them? Or any good ideas how to make a set thats fairly stable? They are for my rock crawler and its just under 3500lbs.
Thanks in advance!

 

[digr]

What are you using them for?

 

[Long haul]

Mostly for storage to take the weight off the springs but I also would like to have them for suspension work on it.

 

[phillis]

Norther tool sells them about $240 for the pair. 28-40something inches. 10 ton capacity

Here's a link
http://www.northerntool.com/shop/tools/product_200318711_200318711

 

[Long haul]

Norther tool sells them about $240 for the pair. 28-40something inches. 10 ton capacity

Here's a link
http://www.northerntool.com/shop/tools/product_200318711_200318711

Thanks!
Thats what I was looking for I must have glanced over them in the catalog.

 

[garfunkle24]

I use Norco 81210 stands (28" - 47"). Made in USA but pricey:

Link

They also have an import version (designated with an "i", so 81210i) which is a little cheaper:
81210i

 

[phillis]

Garfunkle good to see another suby owner on the forum.

 

[alan camby]

I use Norco 81210 stands (28" - 47"). Made in USA but pricey:

Link

They also have an import version (designated with an "i", so 81210i) which is a little cheaper:
81210i

Don't forget you get a free pocket screwdriver from the USA made link

 

[garfunkle24]

Garfunkle good to see another suby owner on the forum.

Yeppers. 05 Sti in WR Blue. How about you?

Don't forget you get a free pocket screwdriver from the USA made link

Sold!

 

[phillis]

Yeppers. 05 Sti in WR Blue. How about you?




Sold!

Fully built 06wrx wrb

 

[garfunkle24]

Fully built 06wrx wrb

Nice. I'm stocking up on parts so I can get everything installed at once and get a pro tune. It's a long way to the closest good tuner from here...

So far I have an AP2, TBE, trans and motor mounts, Wilwood brakes on order and some other bolt on stuff. Haven't decided whether to swap out the turbo or stick with pretty much bolt-ons. I haven't bought any chassis stuff yet either.

I'm not sure how deep to go as there's gonna be a GT-R sitting in my garage real soon. As I won't need it for a DD I'm also considering stripping the interior and making it pretty ********.

decisions decisions....

 

[Dustball]

Search for pipe stands.

 

[m151]

Saw 12 ton ones at HF @ $89 pair. 19" to 30" high, might need a block of plywood to meet your needs.